[libvirt] [PATCH 2/3] xenconfig: add support for openvswitch configuration
Jim Fehlig
jfehlig at suse.com
Thu Dec 6 22:16:31 UTC 2018
On 12/6/18 12:44 AM, Michal Privoznik wrote:
> On 11/16/18 11:26 PM, Jim Fehlig wrote:
>> Add support for converting openvswitch interface configuration
>> to/from libvirt domXML and xl.cfg(5). The xl config syntax for
>> virtual interfaces is described in detail in the
>> xl-network-configuration(5) man page. The Xen Networking wiki
>> also contains information and examples for using openvswitch
>> in xl.cfg config format
>>
>> https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch
>>
>> Tests are added to check conversions of openvswitch tagged and
>> trunked VLAN configuration.
>>
>> Signed-off-by: Jim Fehlig <jfehlig at suse.com>
>> ---
>> src/xenconfig/xen_common.c | 113 +++++++++++++++++-
>> .../test-fullvirt-ovswitch-tagged.cfg | 25 ++++
>> .../test-fullvirt-ovswitch-tagged.xml | 50 ++++++++
>> .../test-fullvirt-ovswitch-trunked.cfg | 25 ++++
>> .../test-fullvirt-ovswitch-trunked.xml | 51 ++++++++
>> tests/xlconfigtest.c | 2 +
>> 6 files changed, 262 insertions(+), 4 deletions(-)
>>
>> diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
>> index 0a9958711f..5390b933e0 100644
>> --- a/src/xenconfig/xen_common.c
>> +++ b/src/xenconfig/xen_common.c
>> @@ -856,6 +856,84 @@ xenParseCharDev(virConfPtr conf, virDomainDefPtr def, const char *nativeFormat)
>> }
>>
>>
>> +static int
>> +xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
>> +{
>> + char *vlanstr;
>> + unsigned int tag;
>> +
>> + /* 'bridge' string contains a bridge name and single vlan tag */
>> + vlanstr = strchr(bridge, '.');
>> + if (vlanstr) {
>> + if (VIR_STRNDUP(net->data.bridge.brname, bridge, vlanstr - bridge) < 0)
>> + return -1;
>> +
>> + vlanstr++;
>> + if (virStrToLong_ui(vlanstr, NULL, 10, &tag) < 0)
>> + return -1;
>> +
>> + if (VIR_ALLOC_N(net->vlan.tag, 1) < 0)
>> + return -1;
>> +
>> + net->vlan.tag[0] = tag;
>> + net->vlan.nTags = 1;
>> +
>> + if (VIR_ALLOC(net->virtPortProfile) < 0)
>> + return -1;
>> +
>> + net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
>> + return 0;
>> + }
>> +
>> + /* 'bridge' string contains a bridge name and one or more vlan trunks */
>> + vlanstr = strchr(bridge, ':');
>> + if (vlanstr) {
>> + size_t i;
>> + size_t nvlans = 0;
>> + char **vlanstr_list = virStringSplit(bridge, ":", 0);
>> +
>> + if (!vlanstr_list)
>> + return -1;
>> +
>> + if (VIR_STRDUP(net->data.bridge.brname, vlanstr_list[0]) < 0) {
>> + virStringListFree(vlanstr_list);
>> + return -1;
>> + }
>> +
>> + for (i = 1; vlanstr_list[i]; i++)
>> + nvlans++;
>> +
>> + if (VIR_ALLOC_N(net->vlan.tag, nvlans) < 0) {
>> + virStringListFree(vlanstr_list);
>> + return -1;
>> + }
>> +
>> + for (i = 1; i <= nvlans; i++) {
>> + if (virStrToLong_ui(vlanstr_list[i], NULL, 10, &tag) < 0) {
>> + virStringListFree(vlanstr_list);
>> + return -1;
>> + }
>> + net->vlan.tag[i - 1] = tag;
>> + }
>> + net->vlan.nTags = nvlans;
>> + net->vlan.trunk = true;
>> + virStringListFree(vlanstr_list);
>> +
>> + if (VIR_ALLOC(net->virtPortProfile) < 0)
>> + return -1;
>> +
>> + net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
>> + return 0;
>> + }
>> +
>> + /* 'bridge' string only contains the bridge name */
>> + if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
>> + return -1;
>> +
>> + return 0;
>
> Not a show stopper, I just wonder if we should perhaps use:
>
> if ((vlanstr = strchr(bridge, '.'))) {
> ...
> } else if ((vlanstr = strchr(bridge, ':'))) {
> ...
> } else {
> ...
> }
>
> return 0;
>
> To me that looks a bit cleaner, but I'll leave it up to you. Don't want
> to be picky.
It definitely looks cleaner. I'll squash in the below diff before pushing.
Thanks a lot for reviewing the patches!
Regards,
Jim
diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
index 83eb28cdc9..60c8d7edc8 100644
--- a/src/xenconfig/xen_common.c
+++ b/src/xenconfig/xen_common.c
@@ -862,9 +862,8 @@ xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
char *vlanstr;
unsigned int tag;
- /* 'bridge' string contains a bridge name and single vlan tag */
- vlanstr = strchr(bridge, '.');
- if (vlanstr) {
+ if ((vlanstr = strchr(bridge, '.'))) {
+ /* 'bridge' string contains a bridge name and single vlan tag */
if (VIR_STRNDUP(net->data.bridge.brname, bridge, vlanstr - bridge) < 0)
return -1;
@@ -883,11 +882,8 @@ xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
return 0;
- }
-
- /* 'bridge' string contains a bridge name and one or more vlan trunks */
- vlanstr = strchr(bridge, ':');
- if (vlanstr) {
+ } else if ((vlanstr = strchr(bridge, ':'))) {
+ /* 'bridge' string contains a bridge name and one or more vlan trunks */
size_t i;
size_t nvlans = 0;
char **vlanstr_list = virStringSplit(bridge, ":", 0);
@@ -924,12 +920,12 @@ xenParseVifBridge(virDomainNetDefPtr net, char *bridge)
net->virtPortProfile->virtPortType = VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH;
return 0;
+ } else {
+ /* 'bridge' string only contains the bridge name */
+ if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
+ return -1;
}
- /* 'bridge' string only contains the bridge name */
- if (VIR_STRDUP(net->data.bridge.brname, bridge) < 0)
- return -1;
-
return 0;
}
More information about the libvir-list
mailing list