[libvirt] [PATCH v3 20/48] remote: introduce virtproxyd daemon to handle IP connectivity

Daniel P. Berrangé berrange at redhat.com
Mon Jul 29 17:11:02 UTC 2019 

The libvirtd daemon provides the traditional libvirt experience where
all the drivers are in a single daemon, and is accessible over both
local UNIX sockets and remote IP sockets.

In the new world we're having a set of per-driver daemons which will
primarily be accessed locally via their own UNIX sockets.

We still, however, need to allow for case of applications which will
connect to libvirt remotely. These remote connections can be done as
TCP/TLS sockets, or by SSH tunnelling to the UNIX socket.

In the later case, the old libvirt.so clients will only know about
the path to the old libvirtd socket /var/run/libvirt/libvirt-sock,
and not the new driver sockets /var/run/libvirt/virtqemud-sock.

It is also not desirable to expose the main driver specific daemons
over IP directly to minimize their attack service.

Thus the virtproxyd daemon steps into place, to provide TCP/TLS sockets,
and back compat for the old libvirtd UNIX socket path(s). It will then
forward all RPC calls made to the appropriate driver specific daemon.

Essentially it is equivalent to the old libvirtd with absolutely no
drivers registered except for the remote driver (and other stateless
drivers in libvirt.so).

We could have modified libvirtd so none of the drivers are registed
to get the same end result. We could even add a libvirtd.conf parameter
to control whether the drivers are loaded to enable users to switch back
to the old world if we discover bugs in the split-daemon model. Using a
new daemon though has some advantages

 - We can make virtproxyd and the virtXXXd per-driver daemons all
   have "Conflicts: libvirtd.service" in their systemd unit files.
   This will guarantee that libvirtd is never started at the same
   time, as this would result in two daemons running the same driver.
   Fortunately drivers use locking to protect themselves, but it is
   better to avoid starting a daemon we know will conflict.

 - It allows us to break CLI compat to remove the --listen parameter.
   Both listen_tcp and listen_tls parameters in /etc/libvirtd/virtd.conf
   will default to zero. Either TLS or TCP can be enabled exclusively
   though virtd.conf without requiring the extra step of adding --listen.

 - It allows us to set a strict SELinux policy over virtproxyd. For
   back compat the libvirtd policy must continue to allow all drivers
   to run. We can't easily give a second policy to libvirtd which
   locks it down. By introducing a new virtproxyd we can set a strict
   policy for that daemon only.

 - It gets rid of the wierd naming of having a daemon with "lib" in
   its name. Now all normal daemons libvirt ships will have "virt"
   as their prefix not "libvirt".

 - Distros can more easily choose their upgrade path. They can
   ship both sets of daemons in their packages, and choose to
   either enable libvirtd, or enable the per-driver daemons and
   virtproxyd out of the box. Users can easily override this if
   desired by just tweaking which systemd units are active.

After some time we can deprecate use of libvirtd and after some more
time delete it entirely, leaving us in a pretty world filled with
prancing unicorns.

The main downside with introducing a new daemon, and with the
per-driver daemons in general, is figuring out the correct upgrade
path.

The conservative option is to leave libvirtd running if it was
an existing installation. Only use the new daemons & virtproxyd
on completely new installs.

The aggressive option is to disable libvirtd if already running
and activate all the new daemons.

Signed-off-by: Daniel P. Berrangé <berrange at redhat.com>
---
 .gitignore                        |   4 ++
 libvirt.spec.in                   |  10 +++
 src/remote/Makefile.inc.am        | 111 +++++++++++++++++++++++++++---
 src/remote/remote_daemon.c        |  28 +++++---
 src/remote/remote_daemon_config.c |   6 +-
 src/remote/virtproxyd.service.in  |  24 +++++++
 6 files changed, 163 insertions(+), 20 deletions(-)
 create mode 100644 src/remote/virtproxyd.service.in

diff --git a/.gitignore b/.gitignore
index 4463660c85..05bc166860 100644
--- a/.gitignore
+++ b/.gitignore
@@ -161,6 +161,9 @@
 /src/remote/libvirtd.aug
 /src/remote/libvirtd.conf
 /src/remote/test_libvirtd.aug
+/src/remote/test_virtproxyd.aug
+/src/remote/virtproxyd.aug
+/src/remote/virtproxyd.conf
 /src/rpc/virkeepaliveprotocol.[ch]
 /src/rpc/virnetprotocol.[ch]
 /src/util/virkeycodetable*.h
@@ -168,6 +171,7 @@
 /src/virt-aa-helper
 /src/virtlockd
 /src/virtlogd
+/src/virtproxyd
 /src/virt-guest-shutdown.target
 /tests/*.log
 /tests/*.pid
diff --git a/libvirt.spec.in b/libvirt.spec.in
index 045c0fed1a..c7f276b2bc 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -1527,6 +1527,12 @@ exit 0
 %{_unitdir}/libvirtd-admin.socket
 %{_unitdir}/libvirtd-tcp.socket
 %{_unitdir}/libvirtd-tls.socket
+%{_unitdir}/virtproxyd.service
+%{_unitdir}/virtproxyd.socket
+%{_unitdir}/virtproxyd-ro.socket
+%{_unitdir}/virtproxyd-admin.socket
+%{_unitdir}/virtproxyd-tcp.socket
+%{_unitdir}/virtproxyd-tls.socket
 %{_unitdir}/virt-guest-shutdown.target
 %{_unitdir}/virtlogd.service
 %{_unitdir}/virtlogd.socket
@@ -1538,6 +1544,7 @@ exit 0
 %config(noreplace) %{_sysconfdir}/sysconfig/virtlogd
 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
+%config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf
 %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf
 %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
@@ -1565,6 +1572,8 @@ exit 0
 %{_datadir}/augeas/lenses/tests/test_virtlogd.aug
 %{_datadir}/augeas/lenses/virtlockd.aug
 %{_datadir}/augeas/lenses/tests/test_virtlockd.aug
+%{_datadir}/augeas/lenses/virtproxyd.aug
+%{_datadir}/augeas/lenses/tests/test_virtproxyd.aug
 %{_datadir}/augeas/lenses/libvirt_lockd.aug
 %if %{with_qemu}
 %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
@@ -1579,6 +1588,7 @@ exit 0
 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
 
 %attr(0755, root, root) %{_sbindir}/libvirtd
+%attr(0755, root, root) %{_sbindir}/virtproxyd
 %attr(0755, root, root) %{_sbindir}/virtlogd
 %attr(0755, root, root) %{_sbindir}/virtlockd
 
diff --git a/src/remote/Makefile.inc.am b/src/remote/Makefile.inc.am
index c9c3c7203a..344f19311a 100644
--- a/src/remote/Makefile.inc.am
+++ b/src/remote/Makefile.inc.am
@@ -89,18 +89,40 @@ SYSCONF_FILES += remote/libvirtd.sysconf
 PODFILES += remote/libvirtd.pod
 MANINFILES += libvirtd.8.in
 
-LIBVIRTD_UNIT_FILES_IN = \
-	remote/libvirtd.service.in \
+LIBVIRTD_SOCKET_UNIT_FILES_IN = \
 	remote/libvirtd.socket.in \
 	remote/libvirtd-ro.socket.in \
 	remote/libvirtd-admin.socket.in \
 	remote/libvirtd-tcp.socket.in \
 	remote/libvirtd-tls.socket.in \
+	$(NULL)
+
+LIBVIRTD_SOCKET_UNIT_FILES = $(notdir $(LIBVIRTD_SOCKET_UNIT_FILES_IN:%.in=%))
+
+LIBVIRTD_UNIT_FILES_IN = \
+	remote/libvirtd.service.in \
+	$(LIBVIRTD_SOCKET_UNIT_FILES_IN) \
+	$(NULL)
+
+VIRTPROXYD_UNIT_FILES_IN = \
+	remote/virtproxyd.service.in \
+	$(NULL)
+
+GUEST_UNIT_FILES_IN = \
 	remote/virt-guest-shutdown.target.in \
 	$(NULL)
 
-SYSTEMD_UNIT_FILES += $(notdir $(LIBVIRTD_UNIT_FILES_IN:%.in=%))
-SYSTEMD_UNIT_FILES_IN += $(LIBVIRTD_UNIT_FILES_IN)
+
+SYSTEMD_UNIT_FILES += \
+	$(notdir $(LIBVIRTD_UNIT_FILES_IN:%.in=%)) \
+	$(notdir $(LIBVIRTD_UNIT_FILES_IN:remote/libvirtd%.in=remote/virtproxyd%)) \
+	$(notdir $(GUEST_UNIT_FILES_IN:%.in=%)) \
+	$(NULL)
+SYSTEMD_UNIT_FILES_IN += \
+	$(LIBVIRTD_UNIT_FILES_IN) \
+	$(VIRTPROXYD_UNIT_FILES_IN) \
+	$(GUEST_UNIT_FILES_IN) \
+	$(NULL)
 
 REMOTE_PROTOCOL = $(srcdir)/remote/remote_protocol.x
 LXC_PROTOCOL = $(srcdir)/remote/lxc_protocol.x
@@ -138,6 +160,7 @@ MAINTAINERCLEANFILES += \
 	$(NULL)
 CLEANFILES += \
 	remote/libvirtd.conf \
+	remote/virtproxyd.conf \
 	$(NULL)
 
 if WITH_REMOTE
@@ -168,15 +191,27 @@ endif ! WITH_REMOTE
 
 if WITH_LIBVIRTD
 
-sbin_PROGRAMS += libvirtd
+sbin_PROGRAMS += libvirtd virtproxyd
 
-augeas_DATA += remote/libvirtd.aug
+augeas_DATA += \
+	remote/libvirtd.aug \
+	remote/virtproxyd.aug \
+	$(NULL)
 
-augeastest_DATA += remote/test_libvirtd.aug
+augeastest_DATA += \
+	remote/test_libvirtd.aug \
+	remote/test_virtproxyd.aug \
+	$(NULL)
 
-nodist_conf_DATA += remote/libvirtd.conf
+nodist_conf_DATA += \
+	remote/libvirtd.conf \
+	remote/virtproxyd.conf \
+	$(NULL)
 
-CLEANFILES += remote/libvirtd.aug
+CLEANFILES += \
+	remote/libvirtd.aug \
+	remote/virtproxyd.aug \
+	$(NULL)
 
 man8_MANS += libvirtd.8
 
@@ -187,12 +222,23 @@ libvirtd_CFLAGS = \
 	-DSOCK_PREFIX="\"libvirt\"" \
 	-DDAEMON_NAME="\"libvirtd\"" \
 	-DENABLE_IP \
+	-DLIBVIRTD \
 	$(NULL)
 
 libvirtd_LDFLAGS = $(REMOTE_DAEMON_LD_FLAGS)
 
 libvirtd_LDADD = $(REMOTE_DAEMON_LD_ADD)
 
+virtproxyd_SOURCES = $(REMOTE_DAEMON_SOURCES)
+virtproxyd_CFLAGS = \
+	$(REMOTE_DAEMON_CFLAGS) \
+	-DSOCK_PREFIX="\"libvirt\"" \
+	-DDAEMON_NAME="\"virtproxyd\"" \
+	-DENABLE_IP \
+	$(NULL)
+virtproxyd_LDFLAGS = $(REMOTE_DAEMON_LD_FLAGS)
+virtproxyd_LDADD = $(REMOTE_DAEMON_LD_ADD)
+
 remote/libvirtd.conf: remote/libvirtd.conf.in
 	$(AM_V_GEN)$(SED) \
 		-e '/[@]CUT_ENABLE_IP[@]/d' \
@@ -201,6 +247,13 @@ remote/libvirtd.conf: remote/libvirtd.conf.in
 		-e 's|[@]DAEMON_NAME[@]|libvirtd|' \
 		< $< > $@
 
+remote/virtproxyd.conf: remote/libvirtd.conf.in
+	$(AM_V_GEN)sed \
+		-e '/[@]CUT_ENABLE_IP[@]/d' \
+		-e '/[@]END[@]/d' \
+		-e 's/[@]DAEMON_NAME[@]/virtproxyd/' \
+		< $^ > $@
+
 INSTALL_DATA_DIRS += remote
 
 install-data-remote:
@@ -218,6 +271,14 @@ remote/libvirtd.aug: remote/libvirtd.aug.in
 		-e 's|[@]DAEMON_NAME_UC[@]|Libvirtd|' \
 		$< > $@
 
+remote/virtproxyd.aug: remote/libvirtd.aug.in
+	$(AM_V_GEN)$(SED) \
+		-e '/[@]CUT_ENABLE_IP[@]/d' \
+		-e '/[@]END[@]/d' \
+		-e 's/[@]DAEMON_NAME[@]/virtproxyd/' \
+		-e 's/[@]DAEMON_NAME_UC[@]/Virtproxyd/' \
+		$< > $@
+
 remote/test_libvirtd.aug: remote/test_libvirtd.aug.in \
 		remote/libvirtd.conf $(AUG_GENTEST)
 	$(AM_V_GEN)$(AUG_GENTEST) remote/libvirtd.conf \
@@ -229,6 +290,16 @@ remote/test_libvirtd.aug: remote/test_libvirtd.aug.in \
 		-e 's|[@]DAEMON_NAME_UC[@]|Libvirtd|' \
 		> $@ || rm -f $@
 
+remote/test_virtproxyd.aug: remote/test_libvirtd.aug.in \
+		remote/virtproxyd.conf $(AUG_GENTEST)
+	$(AM_V_GEN)$(AUG_GENTEST) remote/virtproxyd.conf \
+		$(srcdir)/remote/test_libvirtd.aug.in | \
+		$(SED) -e '/[@]CUT_ENABLE_IP[@]/d' \
+		-e '/[@]END[@]/d' \
+		-e 's/[@]DAEMON_NAME[@]/virtproxyd/' \
+		-e 's/[@]DAEMON_NAME_UC[@]/Virtproxyd/' \
+		> $@ || rm -f $@
+
 if WITH_SYSCTL
 # Use $(prefix)/lib rather than $(libdir), since man sysctl.d insists on
 # /usr/lib/sysctl.d/ even when libdir is /usr/lib64
@@ -303,11 +374,31 @@ LIBVIRTD_UNIT_VARS = \
 	-e 's|[@]deps[@]||g' \
 	$(NULL)
 
+VIRTD_UNIT_VARS = \
+	$(COMMON_UNIT_VARS) \
+	-e 's|[@]deps[@]|Conflicts=$(LIBVIRTD_SOCKET_UNIT_FILES)|g' \
+	$(NULL)
+
+VIRTPROXYD_UNIT_VARS = \
+	$(VIRTD_UNIT_VARS) \
+	-e 's|[@]name[@]|Libvirt proxy|g' \
+	-e 's|[@]service[@]|virtproxyd|g' \
+	-e 's|[@]sockprefix[@]|libvirt|g' \
+	$(NULL)
+
 libvirtd.service: remote/libvirtd.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)sed $(LIBVIRTD_UNIT_VARS) < $< > $@-t && mv $@-t $@
 
 libvirt%.socket: remote/libvirt%.socket.in $(top_builddir)/config.status
-	$(AM_V_GEN)sed $(LIBVIRTD_UNIT_VARS) < $< > $@-t && mv $@-t $@
+	$(AM_V_GEN)sed $(LIBVIRTD_UNIT_VARS) \
+		< $< > $@-t && mv $@-t $@
+
+virtproxyd.service: remote/virtproxyd.service.in $(top_builddir)/config.status
+	$(AM_V_GEN)sed $(VIRTPROXYD_UNIT_VARS) < $< > $@-t && mv $@-t $@
+
+virtproxy%.socket: remote/libvirt%.socket.in $(top_builddir)/config.status
+	$(AM_V_GEN)sed $(VIRTPROXYD_UNIT_VARS) \
+		< $< > $@-t && mv $@-t $@
 
 virt-guest-shutdown.target: remote/virt-guest-shutdown.target.in \
 			$(top_builddir)/config.status
diff --git a/src/remote/remote_daemon.c b/src/remote/remote_daemon.c
index 42c51c1329..02a33d6754 100644
--- a/src/remote/remote_daemon.c
+++ b/src/remote/remote_daemon.c
@@ -311,10 +311,16 @@ static int daemonErrorLogFilter(virErrorPtr err, int priority)
 
 static int daemonInitialize(void)
 {
-#ifdef MODULE_NAME
+#ifndef LIBVIRTD
+# ifdef MODULE_NAME
     /* This a dedicated per-driver daemon build */
     if (virDriverLoadModule(MODULE_NAME, MODULE_NAME "Register", true) < 0)
         return -1;
+# else
+    /* This is virtproxyd which merely proxies to the per-driver
+     * daemons for back compat, and also allows IP connectivity.
+     */
+# endif
 #else
     /* This is the legacy monolithic libvirtd built with all drivers
      *
@@ -906,9 +912,9 @@ daemonUsage(const char *argv0, bool privileged)
         { "-h | --help", N_("Display program help") },
         { "-v | --verbose", N_("Verbose messages") },
         { "-d | --daemon", N_("Run as a daemon & write PID file") },
-#ifdef ENABLE_IP
+#if defined(ENABLE_IP) && defined(LIBVIRTD)
         { "-l | --listen", N_("Listen for TCP/IP connections") },
-#endif /* ENABLE_IP */
+#endif /* ENABLE_IP && LIBVIRTD */
         { "-t | --timeout <secs>", N_("Exit after timeout period") },
         { "-f | --config <file>", N_("Configuration file") },
         { "-V | --version", N_("Display version information") },
@@ -985,7 +991,11 @@ int main(int argc, char **argv) {
     int verbose = 0;
     int godaemon = 0;
 #ifdef ENABLE_IP
+# ifdef LIBVIRTD
     int ipsock = 0;
+# else
+    int ipsock = 1; /* listen_tcp/listen_tls default to 0 */
+# endif
 #endif /* ! ENABLE_IP */
     struct daemonConfig *config;
     bool privileged = geteuid() == 0 ? true : false;
@@ -996,9 +1006,9 @@ int main(int argc, char **argv) {
     struct option opts[] = {
         { "verbose", no_argument, &verbose, 'v'},
         { "daemon", no_argument, &godaemon, 'd'},
-#ifdef ENABLE_IP
+#if defined(ENABLE_IP) && defined(LIBVIRTD)
         { "listen", no_argument, &ipsock, 'l'},
-#endif /* ! ENABLE_IP */
+#endif /* ENABLE_IP && LIBVIRTD */
         { "config", required_argument, NULL, 'f'},
         { "timeout", required_argument, NULL, 't'},
         { "pid-file", required_argument, NULL, 'p'},
@@ -1021,11 +1031,11 @@ int main(int argc, char **argv) {
         int optidx = 0;
         int c;
         char *tmp;
-#ifdef ENABLE_IP
+#if defined(ENABLE_IP) && defined(LIBVIRTD)
         const char *optstr = "ldf:p:t:vVh";
-#else /* ! ENABLE_IP */
+#else /* ! ENABLE_IP && ! LIBVIRTD */
         const char *optstr = "df:p:t:vVh";
-#endif /* ! ENABLE_IP */
+#endif /* ! ENABLE_IP && ! LIBVIRTD */
 
         c = getopt_long(argc, argv, optstr, opts, &optidx);
 
@@ -1043,7 +1053,7 @@ int main(int argc, char **argv) {
             godaemon = 1;
             break;
 
-#ifdef ENABLE_IP
+#if defined(ENABLE_IP) && defined(LIBVIRTD)
         case 'l':
             ipsock = 1;
             break;
diff --git a/src/remote/remote_daemon_config.c b/src/remote/remote_daemon_config.c
index 3c5ccd5ba8..f583442dc7 100644
--- a/src/remote/remote_daemon_config.c
+++ b/src/remote/remote_daemon_config.c
@@ -108,7 +108,11 @@ daemonConfigNew(bool privileged ATTRIBUTE_UNUSED)
         return NULL;
 
 #ifdef ENABLE_IP
-    data->listen_tls = 1;
+# ifdef LIBVIRTD
+    data->listen_tls = 1; /* Only honoured it --listen is set */
+# else /* ! LIBVIRTD */
+    data->listen_tls = 0; /* Always honoured, --listen doesn't exist. */
+# endif /* ! LIBVIRTD */
     data->listen_tcp = 0;
 
     if (VIR_STRDUP(data->tls_port, LIBVIRTD_TLS_PORT) < 0 ||
diff --git a/src/remote/virtproxyd.service.in b/src/remote/virtproxyd.service.in
new file mode 100644
index 0000000000..e99e2af19c
--- /dev/null
+++ b/src/remote/virtproxyd.service.in
@@ -0,0 +1,24 @@
+[Unit]
+Description=Virtualization daemon
+Conflicts=libvirtd.service
+Requires=virtproxyd.socket
+Requires=virtproxyd-ro.socket
+Requires=virtproxyd-admin.socket
+After=network.target
+After=dbus.service
+After=apparmor.service
+After=local-fs.target
+Documentation=man:libvirtd(8)
+Documentation=https://libvirt.org
+
+[Service]
+Type=notify
+ExecStart=@sbindir@/virtproxyd --timeout 120
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
+Also=virtproxyd.socket
+Also=virtproxyd-ro.socket
+Also=virtproxyd-admin.socket
-- 
2.21.0

More information about the libvir-list mailing list