[libvirt] [jenkins-ci] guests: Add support for openSUSE Leap 15.1
Fabiano Fidêncio
fidencio at redhat.com
Tue Nov 19 08:12:02 UTC 2019
Jim,
On Tue, Nov 19, 2019 at 1:40 AM Jim Fehlig <jfehlig at suse.com> wrote:
>
> On 11/18/19 5:21 PM, Jim Fehlig wrote:
> > Signed-off-by: Jim Fehlig <jfehlig at suse.com>
> > ---
> > guests/configs/autoinst.xml | 86 +++++++++++++++++++
> > .../libvirt-opensuse-15.1/docker.yml | 2 +
> > .../libvirt-opensuse-15.1/install.yml | 2 +
> > .../host_vars/libvirt-opensuse-15.1/main.yml | 22 +++++
> > guests/inventory | 1 +
> > guests/lcitool | 2 +
> > guests/vars/mappings.yml | 38 +++++++-
> > 7 files changed, 151 insertions(+), 2 deletions(-)
> >
> > diff --git a/guests/configs/autoinst.xml b/guests/configs/autoinst.xml
> > new file mode 100644
> > index 0000000..9b93a29
> > --- /dev/null
> > +++ b/guests/configs/autoinst.xml
> > @@ -0,0 +1,86 @@
> > +<?xml version="1.0"?>
> > +<!DOCTYPE profile>
> > +<profile
> > + xmlns="http://www.suse.com/1.0/yast2ns"
> > + xmlns:config="http://www.suse.com/1.0/configns">
> > + <general>
> > + <mode>
> > + <confirm config:type="boolean">false</confirm>
> > + </mode>
> > + </general>
> > + <partitioning config:type="list">
> > + <drive>
> > + <device>/dev/vda</device>
> > + <use>all</use>
> > + <partitions config:type="list">
> > + <partition>
> > + <filesystem config:type="symbol">swap</filesystem>
> > + <size>500M</size>
> > + <mount>swap</mount>
> > + </partition>
> > + <partition>
> > + <filesystem config:type="symbol">ext4</filesystem>
> > + <mount>/</mount>
> > + <size>max</size>
> > + </partition>
> > + </partitions>
> > + </drive>
> > + </partitioning>
> > + <timezone>
> > + <hwclock>UTC</hwclock>
> > + <timezone>UTC</timezone>
> > + </timezone>
> > + <add-on>
> > + <add_on_products config:type="list">
> > + <listentry>
> > + <media_url>http://download.opensuse.org/distribution/leap/15.1/repo/oss/</media_url>
> > + <name>repo-oss</name>
> > + </listentry>
> > + <listentry>
> > + <media_url>http://download.opensuse.org/update/leap/15.1/oss</media_url>
> > + <name>repo-update</name>
> > + </listentry>
> > + <listentry>
> > + <media_url>http://download.opensuse.org/distribution/leap/15.1/repo/non-oss/</media_url>
> > + <name>repo-non-oss</name>
> > + </listentry>
> > + <listentry>
> > + <media_url>http://download.opensuse.org/update/leap/15.1/non-oss/</media_url>
> > + <name>repo-update-non-oss</name>
> > + </listentry>
> > + </add_on_products>
> > + </add-on>
> > + <software>
> > + <install_recommended config:type="boolean">false</install_recommended>
> > + <patterns config:type="list">
> > + <pattern>base</pattern>
> > + <pattern>minimal_base</pattern>
> > + <pattern>yast2_basis</pattern>
> > + </patterns>
> > + </software>
> > + <networking>
> > + <keep_install_network config:type="boolean">true</keep_install_network>
> > + </networking>
> > + <users config:type="list">
> > + <user>
> > + <username>root</username>
> > + <user_password>root</user_password>
> > + <encrypted config:type="boolean">false</encrypted>
> > + <uid>0</uid>
> > + <gid>0</gid>
> > + <home>/root</home>
> > + <shell>/bin/bash</shell>
> > + </user>
> > + </users>
> > + <services-manager>
> > + <default_target>multi-user</default_target>
> > + <services>
> > + <enable config:type="list">
> > + <service>sshd</service>
> > + </enable>
> > + </services>
> > + </services-manager>
> > + <firewall>
> > + <enable_firewall>true</enable_firewall>
>
> This should be 'false', or perhaps excluded altogether.
>
> BTW, with this patch applied (and some workarounds for problems on my end) I'm
> able to successfully install the guest with 'lcitool install', but update needs
> some work
>
> # ./lcitool update libvirt-opensuse-151 libvirt
>
> PLAY [all]
> *****************************************************************************************************
> included:
> /home/jfehlig/virt/upstream/libvirt-jenkins-ci/guests/playbooks/update/tasks/bootstrap.yml
> for libvirt-opensuse-151
>
> TASK [set_fact]
> ************************************************************************************************
> ok: [libvirt-opensuse-151]
>
> TASK [Bootstrap Ansible]
> ***************************************************************************************
> changed: [libvirt-opensuse-151]
>
> PLAY [all]
> *****************************************************************************************************
>
> TASK [Gathering Facts]
> *****************************************************************************************
> ok: [libvirt-opensuse-151]
> included:
> /home/jfehlig/virt/upstream/libvirt-jenkins-ci/guests/playbooks/update/tasks/base.yml
> for libvirt-opensuse-151
>
> TASK [Update installed packages]
> *******************************************************************************
> ok: [libvirt-opensuse-151]
>
> TASK [Clean up packages after update]
> **************************************************************************
> fatal: [libvirt-opensuse-151]: FAILED! => {"changed": true, "cmd": "zypper clean
> packages -y && zypper autoremove -y", "delta": "0:00:00.069846", "end":
> "2019-11-19 00:29:38.579176", "msg": "non-zero return code", "rc": 2, "start":
> "2019-11-19 00:29:38.509330", "stderr": "Repository 'packages' not found by its
> alias, number, or URI.\nRepository '-y' not found by its alias, number, or
> URI.\nUnknown command 'autoremove'", "stderr_lines": ["Repository 'packages' not
> found by its alias, number, or URI.", "Repository '-y' not found by its alias,
> number, or URI.", "Unknown command 'autoremove'"], "stdout": "Use 'zypper repos'
> to get the list of defined repositories.\nAll repositories have been cleaned
> up.\nType 'zypper help' to get a list of global options and commands.\n\nIn case
> 'autoremove' is not a typo it's probably not a built-in command, but provided as
> a subcommand or plug-in (see 'zypper help subcommand').\nIn this case a specific
> package providing the subcommand needs to be installed first. Those packages are
> often named 'zypper-autoremove' or 'zypper-autoremove-plugin'.", "stdout_lines":
> ["Use 'zypper repos' to get the list of defined repositories.", "All
> repositories have been cleaned up.", "Type 'zypper help' to get a list of global
> options and commands.", "", "In case 'autoremove' is not a typo it's probably
> not a built-in command, but provided as a subcommand or plug-in (see 'zypper
> help subcommand').", "In this case a specific package providing the subcommand
> needs to be installed first. Those packages are often named 'zypper-autoremove'
> or 'zypper-autoremove-plugin'."]}
>
> PLAY RECAP
> *****************************************************************************************************
> libvirt-opensuse-151 : ok=6 changed=1 unreachable=0 failed=1
> skipped=9 rescued=0 ignored=0
>
> ./lcitool: Failed to run update on 'libvirt-opensuse-151': Command
> '['/usr/bin/ansible-playbook', '--limit', 'libvirt-opensuse-151',
> '--extra-vars', '{"selected_projects": ["libvirt"], "git_remote": "default",
> "root_password_file": "/root/.config/lcitool/root-password", "playbook_base":
> "/home/jfehlig/virt/upstream/libvirt-jenkins-ci/guests/playbooks/update",
> "base": "/home/jfehlig/virt/upstream/libvirt-jenkins-ci/guests", "git_branch":
> "master", "flavor": "test"}',
> '/home/jfehlig/virt/upstream/libvirt-jenkins-ci/guests/playbooks/update/main.yml']'
> returned non-zero exit status 2
>
> Looks like I'll need to do some work in the package manager code for zypper.
Yes, what's happening here is that lcitools doesn't know about
openSUSE commands for updating, installing, and cleaning up the
packages.
For pointers, please, take a look at:
- For the VMs:
- guests/playbooks/update/tasks/base.yml:52
- For the containers:
- guests/lcitool:726
I'll play a little bit with this during the day and will let you know
the results of my tests.
Best Regards,
--
Fabiano Fidêncio
More information about the libvir-list
mailing list