[libvirt] [PATCH 2/3] qemu: move runtime netdev validation into a separate function

Laine Stump laine at redhat.com
Fri Sep 13 14:52:30 UTC 2019


The same validation should be done for both static network devices and
hotplugged devices, but they are currently inconsistent. Move all the
relevant validation from qemuBuildInterfaceCommandLine() into the new
function qemuDomainValidateActualNetDef() and call the latter from
the former.

Signed-off-by: Laine Stump <laine at redhat.com>
---
 src/qemu/qemu_command.c | 52 +--------------------------
 src/qemu/qemu_domain.c  | 80 +++++++++++++++++++++++++++++++++++++++++
 src/qemu/qemu_domain.h  |  4 +++
 3 files changed, 85 insertions(+), 51 deletions(-)

diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index f795f2e987..2acae3bf33 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -8352,50 +8352,8 @@ qemuBuildInterfaceCommandLine(virQEMUDriverPtr driver,
     if (!bootindex)
         bootindex = net->info.bootIndex;
 
-    /* Currently nothing besides TAP devices supports multiqueue. */
-    if (net->driver.virtio.queues > 0 &&
-        !(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
-          actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
-          actualType == VIR_DOMAIN_NET_TYPE_DIRECT ||
-          actualType == VIR_DOMAIN_NET_TYPE_ETHERNET ||
-          actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER)) {
-        virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
-                       _("Multiqueue network is not supported for: %s"),
-                       virDomainNetTypeToString(actualType));
+    if (qemuDomainValidateActualNetDef(net, qemuCaps) < 0)
         return -1;
-    }
-
-    /* and only TAP devices support nwfilter rules */
-    if (net->filter) {
-        virNetDevVPortProfilePtr vport = virDomainNetGetActualVirtPortProfile(net);
-        if (!(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
-              actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
-              actualType == VIR_DOMAIN_NET_TYPE_ETHERNET)) {
-            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
-                           _("filterref is not supported for "
-                             "network interfaces of type %s"),
-                           virDomainNetTypeToString(actualType));
-            return -1;
-        }
-        if (vport && vport->virtPortType != VIR_NETDEV_VPORT_PROFILE_NONE) {
-            /* currently none of the defined virtualport types support iptables */
-            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
-                           _("filterref is not supported for "
-                             "network interfaces with virtualport type %s"),
-                           virNetDevVPortTypeToString(vport->virtPortType));
-            return -1;
-        }
-    }
-
-    if (net->backend.tap &&
-        !(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
-          actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
-          actualType == VIR_DOMAIN_NET_TYPE_ETHERNET)) {
-        virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
-                       _("Custom tap device path is not supported for: %s"),
-                       virDomainNetTypeToString(actualType));
-        return -1;
-    }
 
     switch (actualType) {
     case VIR_DOMAIN_NET_TYPE_NETWORK:
@@ -8458,14 +8416,6 @@ qemuBuildInterfaceCommandLine(virQEMUDriverPtr driver,
     case VIR_DOMAIN_NET_TYPE_VHOSTUSER:
         requireNicdev = true;
 
-        if (net->driver.virtio.queues > 1 &&
-            !virQEMUCapsGet(qemuCaps, QEMU_CAPS_VHOSTUSER_MULTIQUEUE)) {
-            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
-                           _("multi-queue is not supported for vhost-user "
-                             "with this QEMU binary"));
-            goto cleanup;
-        }
-
         if (qemuInterfaceVhostuserConnect(driver, logManager, secManager,
                                           cmd, def, net, qemuCaps, &chardev) < 0)
             goto cleanup;
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index bd247628cb..ebbe1a85db 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -5300,6 +5300,86 @@ qemuDomainWatchdogDefValidate(const virDomainWatchdogDef *dev,
 }
 
 
+
+int
+qemuDomainValidateActualNetDef(const virDomainNetDef *net,
+                               virQEMUCapsPtr qemuCaps)
+{
+    /*
+     * Validations that can only be properly checked at runtime (after
+     * an <interface type='network'> has been resolved to its actual
+     * type.
+     *
+     * (In its current form this function can still be called before
+     * the actual type has been resolved (e.g. at domain definition
+     * time), but only if the validations would SUCCEED for
+     * type='network'.)
+     */
+    virDomainNetType actualType = virDomainNetGetActualType(net);
+
+    /* Only tap/macvtap devices support multiqueue. */
+    if (net->driver.virtio.queues > 1) {
+
+        if (!(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
+              actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
+              actualType == VIR_DOMAIN_NET_TYPE_DIRECT ||
+              actualType == VIR_DOMAIN_NET_TYPE_ETHERNET ||
+              actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER)) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                           _("multiqueue network is not supported for: %s"),
+                           virDomainNetTypeToString(actualType));
+            return -1;
+        }
+
+        if (actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER &&
+            qemuCaps && !virQEMUCapsGet(qemuCaps, QEMU_CAPS_VHOSTUSER_MULTIQUEUE)) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                           _("multiqueue network is not supported for vhost-user "
+                             "with this QEMU binary"));
+            return -1;
+        }
+    }
+
+    /*
+     * Only standard tap devices support nwfilter rules, and even then only
+     * when *not* connected to an OVS bridge or midonet (indicated by having
+     * a <virtualport> element in the config)
+     */
+    if (net->filter) {
+        virNetDevVPortProfilePtr vport = virDomainNetGetActualVirtPortProfile(net);
+        if (!(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
+              actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
+              actualType == VIR_DOMAIN_NET_TYPE_ETHERNET)) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                           _("filterref is not supported for "
+                             "network interfaces of type %s"),
+                           virDomainNetTypeToString(actualType));
+            return -1;
+        }
+        if (vport && vport->virtPortType != VIR_NETDEV_VPORT_PROFILE_NONE) {
+            /* currently none of the defined virtualport types support iptables */
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                           _("filterref is not supported for "
+                             "network interfaces with virtualport type %s"),
+                           virNetDevVPortTypeToString(vport->virtPortType));
+            return -1;
+        }
+    }
+
+    if (net->backend.tap &&
+        !(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
+          actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
+          actualType == VIR_DOMAIN_NET_TYPE_ETHERNET)) {
+        virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                       _("Custom tap device path is not supported for: %s"),
+                       virDomainNetTypeToString(actualType));
+        return -1;
+    }
+
+    return 0;
+ }
+
+
 static int
 qemuDomainDeviceDefValidateNetwork(const virDomainNetDef *net)
 {
diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h
index 3e87e75c3a..f53ea146e1 100644
--- a/src/qemu/qemu_domain.h
+++ b/src/qemu/qemu_domain.h
@@ -1215,3 +1215,7 @@ qemuDomainNVRAMPathGenerate(virQEMUDriverConfigPtr cfg,
 
 virDomainEventSuspendedDetailType
 qemuDomainPausedReasonToSuspendedEvent(virDomainPausedReason reason);
+
+int
+qemuDomainValidateActualNetDef(const virDomainNetDef *net,
+                               virQEMUCapsPtr qemuCaps);
-- 
2.21.0




More information about the libvir-list mailing list