[PATCH v4 14/14] kbase: Document virtio-mem
Jim Fehlig
jfehlig at suse.com
Wed Jun 23 15:52:36 UTC 2021
On 6/23/21 4:12 AM, Michal Privoznik wrote:
> This commit adds new memorydevices.rst page which should serve
> all models of memory devices. Yet, I'm documenting virtio-mem
> quirks only.
>
> Signed-off-by: Michal Privoznik <mprivozn at redhat.com>
> ---
> docs/kbase/index.rst | 4 +
> docs/kbase/memorydevices.rst | 150 +++++++++++++++++++++++++++++++++++
> docs/kbase/meson.build | 1 +
> 3 files changed, 155 insertions(+)
> create mode 100644 docs/kbase/memorydevices.rst
>
> diff --git a/docs/kbase/index.rst b/docs/kbase/index.rst
> index 91083ee49d..6355fe4f1d 100644
> --- a/docs/kbase/index.rst
> +++ b/docs/kbase/index.rst
> @@ -52,6 +52,10 @@ Usage
> `PCI topology <../pci-addresses.html>`__
> Addressing schemes for PCI devices
>
> +`Memory devices <memorydevices.html>`__
> + Memory devices and their use
> +
> +
> Internals / Debugging
> ---------------------
>
> diff --git a/docs/kbase/memorydevices.rst b/docs/kbase/memorydevices.rst
> new file mode 100644
> index 0000000000..23ccd6da88
> --- /dev/null
> +++ b/docs/kbase/memorydevices.rst
> @@ -0,0 +1,150 @@
> +==============
> +Memory devices
> +==============
> +
> +.. contents::
> +
> +Basics
> +======
> +
> +Memory devices can be divided into two families: volatile and non-volatile.
> +The former is typical RAM memory: it's volatile and thus its contents doesn't
> +survive reboots nor guest shut downs and power ons.
The last part of this sentence is a little awkward. How about something like
"... its contents doesn't survive guest reboots or power cycles." ?
> The latter retains its
> +contents across reboots or power outages.
> +
> +In Libvirt, there are two models for volatile memory:
> +
> +* ``dimm`` model:
> +
> + ::
> +
> + <memory model='dimm'>
> + <target>
> + <size unit='KiB'>523264</size>
> + <node>0</node>
> + </target>
> + <address type='dimm' slot='0'/>
> + </memory>
> +
> +* ``virtio-mem`` model:
> +
> + ::
> +
> + <memory model='virtio-mem'>
> + <target>
> + <size unit='KiB'>1048576</size>
> + <node>0</node>
> + <block unit='KiB'>2048</block>
> + <requested unit='KiB'>524288</requested>
> + </target>
> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
> + </memory>
> +
> +Then there are two models for non-volatile memory:
> +
> +* ``nvidmm`` model:
nvdimm
> +
> + ::
> +
> + <memory model='nvdimm'>
> + <source>
> + <path>/tmp/nvdimm</path>
> + </source>
> + <target>
> + <size unit='KiB'>523264</size>
> + <node>0</node>
> + </target>
> + <address type='dimm' slot='0'/>
> + </memory>
> +
> +* ``virtio-pmem`` model:
> +
> + ::
> +
> + <memory model='virtio-pmem' access='shared'>
> + <source>
> + <path>/tmp/virtio_pmem</path>
> + </source>
> + <target>
> + <size unit='KiB'>524288</size>
> + </target>
> + <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
> + </memory>
> +
> +
> +Please note that (maybe somewhat surprisingly) virtio models go onto PCI bus
> +instead of DIMM slots.
> +
> +Furthermore, DIMMs can have ``<source/>`` element which configures backend for
> +devices. For NVDIMMs the element is mandatory and reflects where the contents
> +is saved.
"where the content is saved" or "where the contents are saved"
> +
> +See `memory devices documentation <../formatdomain.html#elementsMemory>`_.
> +
> +``virtio-mem`` model
> +====================
> +
> +The ``virtio-mem`` model can be viewed as revised memory balloon. It offers
> +adding and removing memory (without the actual hotplug of the device). It
> +solves problems that memory balloon can't solve on its own and thus is more
> +flexible than DIMM + balloon solution. ``virtio-mem`` is NUMA aware, and thus
> +memory can be inflated/deflated only for a subset of guest NUMA nodes. Also,
> +it works with chunks that are either exposed to guest or taken back from it.
"or reclaimed from it" ?
> +
> +See https://virtio-mem.gitlab.io/
> +
> +Under the hood, ``virtio-mem`` device is split into chunks of equal size which
> +are then exposed to the guest. Either all of them or only a portion depending
> +on user's request. Therefore there are three important sizes for
> +``virtio-mem``. All are to be found under ``<target/>`` element:
> +
> +#. The maximum size the device can ever offer, exposed under ``<size/>``
> +#. The size of a single block, exposed under ``<block/>``
> +#. The current size exposed to the guest, exposed under ``<requested/>``
> +
> +For instance, the following example the maximum size is 4GiB, the block size is
"For instance, in the following example ..."
> +2MiB and only 1GiB should be exposed to the guest:
> +
> + ::
> +
> + <memory model='virtio-mem'>
> + <target>
> + <size unit='KiB'>4194304</size>
> + <block unit='KiB'>2048</block>
> + <requested unit='KiB'>1048576</requested>
> + </target>
> + </memory>
> +
> +Please note that ``<requested/>`` must be an integer multiple of ``<block/>``
> +size or zero (no blocks exposed to the guest) and has to be less or equal to
> +``<size/>`` (all blocks exposed to the guest). Furthermore, QEMU recommends the
> +``<block/>`` size to be as big as a Transparent Huge Page (usually 2MiB).
> +
> +To change the size exposed to the guest, users should pass memory device XML
> +with nothing but ``<requested/>`` changed into the
> +``virDomainUpdateDeviceFlags()`` API. For user's convenience this can be done
> +via virsh too:
> +
> + ::
> +
> + # virsh update-memory-device $dom --requested-size 2GiB
> +
> +If there are two or more ``<memory/>`` devices then ``--alias`` shall be used
> +to tell virsh which memory device should be updated.
> +
> +For running guests there is fourth size that can be found under ``<target/>``:
> +
> + ::
> +
> + <actual unit='KiB'>2097152</actual>
> +
> +The ``<actual/>`` reflects the actual size used by the guest. In general it
> +can differ from ``<requested/>``. Reasons include guest kernel missing
> +``virtio-mem`` module and thus being unable to take offered memory, or guest
> +kernel being unable to free memory. Since ``<actual/>`` only reports size to
> +users, the element is never parsed. It is formatted only into live XML.
> +
> +Since changing actual allocation requires cooperation with guest kernel,
> +requests for change are not instant. Therefore, libvirt emits
> +``VIR_DOMAIN_EVENT_ID_MEMORY_DEVICE_SIZE_CHANGE`` event whenever actual
> +allocation changed.
Nice doc, and nice addition to the KB!
Reviewed-by: Jim Fehlig <jfehlig at suse.com>
Regards,
Jim
> diff --git a/docs/kbase/meson.build b/docs/kbase/meson.build
> index 7631b47018..f93f687efb 100644
> --- a/docs/kbase/meson.build
> +++ b/docs/kbase/meson.build
> @@ -10,6 +10,7 @@ docs_kbase_files = [
> 'locking-lockd',
> 'locking',
> 'locking-sanlock',
> + 'memorydevices',
> 'merging_disk_image_chains',
> 'migrationinternals',
> 'qemu-passthrough-security',
>
More information about the libvir-list
mailing list