[PATCH 4/4] docs: add s390-pv documentation
Daniel Henrique Barboza
danielhb413 at gmail.com
Thu May 20 18:18:48 UTC 2021
On 5/19/21 2:40 PM, Boris Fiuczynski wrote:
> Add documentation for launch security type s390-pv.
>
> Signed-off-by: Boris Fiuczynski <fiuczy at linux.ibm.com>
> ---
> docs/formatdomain.rst | 7 ++++
> docs/kbase/s390_protected_virt.rst | 55 +++++++++++++++++++++++++-----
> 2 files changed, 54 insertions(+), 8 deletions(-)
>
> diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst
> index fa5c14febc..635fd5a55f 100644
> --- a/docs/formatdomain.rst
> +++ b/docs/formatdomain.rst
> @@ -8044,6 +8044,13 @@ Note: DEA/TDEA is synonymous with DES/TDES.
> Launch Security
> ---------------
>
> +Specifying ``<launchSecurity type='s390-pv'\>`` in an s390 VM prepares for
> +running the guest in protected virtualization secure mode, also known as
> +IBM Secure Execution. For more required host and guest preparation steps, see
The flow is a bit awkward here. Perhaps something like:
"Specifying ``<launchSecurity type='s390-pv'\>`` in a s390 domain prepares
the guest to run in protected virtualization secure mode, also known as
IBM Secure Execution. (...)"
Other than that,
Reviewed-by: Daniel Henrique Barboza <danielhb413 at gmail.com>
> +`Protected Virtualization on s390 <kbase/s390_protected_virt.html>`__
> +:since:`Since 7.4.0`
> +
> +
> The contents of the ``<launchSecurity type='sev'>`` element is used to provide
> the guest owners input used for creating an encrypted VM using the AMD SEV
> feature (Secure Encrypted Virtualization). SEV is an extension to the AMD-V
> diff --git a/docs/kbase/s390_protected_virt.rst b/docs/kbase/s390_protected_virt.rst
> index 1718a556d4..5c9ce0e21c 100644
> --- a/docs/kbase/s390_protected_virt.rst
> +++ b/docs/kbase/s390_protected_virt.rst
> @@ -127,10 +127,13 @@ Protected virtualization guests support I/O using virtio devices.
> As the virtio data structures of secure guests are not accessible
> by the host, it is necessary to use shared memory ('bounce buffers').
>
> -To enable virtio devices to use shared buffers, it is necessary
> -to configure them with platform_iommu enabled. This can done by adding
> -``iommu='on'`` to the driver element of a virtio device definition in the
> -guest's XML, e.g.
> +Since libvirt 7.4.0 the
> +`<launchSecurity> <https://libvirt.org/formatdomain.html#launchSecurity>`__
> +element with type ``s390-pv`` should be used on protected virtualization guests.
> +Without ``launchSecurity`` you must enable all virtio devices to use shared
> +buffers by configuring them with platform_iommu enabled.
> +This can done by adding ``iommu='on'`` to the driver element of a virtio
> +device definition in the guest's XML, e.g.
>
> ::
>
> @@ -140,8 +143,10 @@ guest's XML, e.g.
> <driver name='vhost' iommu='on'/>
> </interface>
>
> -It is mandatory to define all virtio bus devices in this way to
> -prevent the host from attempting to access protected memory.
> +Unless you are using ``launchSecurity`` you must define all virtio bus
> +devices in this way to prevent the host from attempting to access
> +protected memory.
> +
> Ballooning will not work and is fenced by QEMU. It should be
> disabled by specifying
>
> @@ -158,8 +163,42 @@ allocated 2K entries. A commonly used value for swiotlb is 262144.
> Example guest definition
> ========================
>
> -Minimal domain XML for a protected virtualization guest, essentially
> -it's mostly about the ``iommu`` property
> +Minimal domain XML for a protected virtualization guest with
> +the ``launchSecurity`` element of type ``s390-pv``
> +
> +::
> +
> + <domain type='kvm'>
> + <name>protected</name>
> + <memory unit='KiB'>2048000</memory>
> + <currentMemory unit='KiB'>2048000</currentMemory>
> + <vcpu>1</vcpu>
> + <os>
> + <type arch='s390x'>hvm</type>
> + </os>
> + <cpu mode='host-model'/>
> + <devices>
> + <disk type='file' device='disk'>
> + <driver name='qemu' type='qcow2' cache='none' io='native'>
> + <source file='/var/lib/libvirt/images/protected.qcow2'/>
> + <target dev='vda' bus='virtio'/>
> + </disk>
> + <interface type='network'>
> + <source network='default'/>
> + <model type='virtio'/>
> + </interface>
> + <console type='pty'/>
> + <memballoon model='none'/>
> + </devices>
> + <launchSecurity type='s390-pv'/>
> + </domain>
> +
> +
> +Example guest definition without launchSecurity
> +===============================================
> +
> +Minimal domain XML for a protected virtualization guest using the
> +``iommu='on'`` setting for each virtio device.
>
> ::
>
>
More information about the libvir-list
mailing list