[RFC v2 1/1] qemu: add index for isa-serial device using target.port

Divya Garg divya.garg at nutanix.com
Mon Jan 3 08:43:17 UTC 2022


Thankyou Ani for the review. I will be taking up the comments
in next patchset along with other comments.

On 03/01/22 1:44 pm, Ani Sinha wrote:

>
> On Mon, 3 Jan 2022, Divya Garg wrote:
>
>> Hi all !
>>
>> Looking forward for the review comments on the patch.
>>
> For single patches, no need to use numbering.
I have also added the cover letter with the patch. Hence added the 
numbering here.
>
>> Thanks
>> Regards
>> Divya Garg
>>
>>
>> On 12/12/21 9:27 am, “Divya wrote:
>>> From: Divya Garg <divya.garg at nutanix.com>
>>>
>>> VM XML accepts target.port but this does not get passed while building the
>>> qemu
>>> command line for this VM.
>>>
>>> This patch fixes this bug. In addition,
> I think we should split up this patch into two, one that fixes the
> existing issue and the other that introduces additinal checks. It would be
> easier to review it that way.
Yeah sounds reasonable. Will do it in the next patch set.
>
> this introduces additional checks in
>>> the port allocation logic for isa-serial devices to :
>>> * Check availability of requested ports
>>> * Prevent duplicate device assignments to the same port.
>>> * In case no ports are provided in the XML, this patch scans the list of
>>> unused
>>>     isa-serial indices to automatically assign available ports for this VM.
>>>
>>> Signed-off-by: Divya Garg <divya.garg at nutanix.com>
>>> ---
>>>    src/conf/domain_conf.c                        | 66 ++++++++++++++++---
>>>    src/conf/domain_conf.h                        |  1 +
>>>    src/qemu/qemu_command.c                       | 21 ++++--
>>>    ...g-console-compat-2-live+console-virtio.xml |  4 +-
>>>    .../qemuhotplug-console-compat-2-live.xml     |  4 +-
>>>    tests/qemuxml2argvdata/bios.args              |  2 +-
>>>    .../qemuxml2argvdata/console-compat-auto.args |  2 +-
>>>    .../console-compat-chardev.args               |  2 +-
>>>    tests/qemuxml2argvdata/console-compat.args    |  2 +-
>>>    .../qemuxml2argvdata/console-virtio-many.args |  2 +-
>>>    tests/qemuxml2argvdata/controller-order.args  |  2 +-
>>>    .../name-escape.x86_64-2.11.0.args            |  4 +-
>>>    .../q35-virt-manager-basic.args               |  2 +-
>>>    .../serial-dev-chardev-iobase.args            |  2 +-
>>>    .../qemuxml2argvdata/serial-dev-chardev.args  |  2 +-
>>>    .../qemuxml2argvdata/serial-file-chardev.args |  2 +-
>>>    tests/qemuxml2argvdata/serial-file-log.args   |  2 +-
>>>    .../qemuxml2argvdata/serial-many-chardev.args |  4 +-
>>>    .../qemuxml2argvdata/serial-pty-chardev.args  |  2 +-
>>>    tests/qemuxml2argvdata/serial-spiceport.args  |  2 +-
>>>    .../qemuxml2argvdata/serial-tcp-chardev.args  |  2 +-
>>>    .../serial-tcp-telnet-chardev.args            |  2 +-
>>>    .../serial-tcp-tlsx509-chardev-notls.args     |  4 +-
>>>    .../serial-tcp-tlsx509-chardev-notls.xml      |  2 +-
>>>    .../serial-tcp-tlsx509-chardev-verify.args    |  4 +-
>>>    .../serial-tcp-tlsx509-chardev-verify.xml     |  2 +-
>>>    .../serial-tcp-tlsx509-chardev.args           |  4 +-
>>>    .../serial-tcp-tlsx509-chardev.xml            |  2 +-
>>>    .../serial-tcp-tlsx509-secret-chardev.args    |  4 +-
>>>    .../serial-tcp-tlsx509-secret-chardev.xml     |  2 +-
>>>    .../qemuxml2argvdata/serial-udp-chardev.args  |  4 +-
>>>    .../qemuxml2argvdata/serial-unix-chardev.args |  4 +-
>>>    .../serial-unix-chardev.x86_64-latest.args    |  4 +-
>>>    tests/qemuxml2argvdata/serial-vc-chardev.args |  2 +-
>>>    tests/qemuxml2argvdata/user-aliases.args      |  4 +-
>>>    .../virtio-9p-createmode.x86_64-latest.args   |  2 +-
>>>    .../virtio-9p-multidevs.x86_64-latest.args    |  2 +-
>>>    .../x86_64-pc-graphics.x86_64-latest.args     |  2 +-
>>>    .../x86_64-pc-headless.x86_64-latest.args     |  2 +-
>>>    .../x86_64-q35-graphics.x86_64-latest.args    |  2 +-
>>>    .../x86_64-q35-headless.x86_64-latest.args    |  2 +-
>>>    .../serial-tcp-tlsx509-chardev.xml            |  2 +-
>>>    42 files changed, 126 insertions(+), 64 deletions(-)
>>>
>>> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
>>> index 107d2a4f5d..e8b19828d4 100644
>>> --- a/src/conf/domain_conf.c
>>> +++ b/src/conf/domain_conf.c
>>> @@ -5319,6 +5319,61 @@ virDomainHostdevDefPostParse(virDomainHostdevDef
>>> *dev,
>>>    }
>>>      +static int
>>> +virDomainChrIsaSerialDefPostParse(virDomainDef *def)
>>> +{
>>> +    size_t i, j;
>>> +    size_t isa_serial_count = 0;
>>> +    int isa_device_index_arr[VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS] = {0};
>>> +    bool used_serial_port[VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS] = {false};
>>> +
>>> +    for (i = 0; i < def->nserials; i++) {
>>> +        if (def->serials[i]->targetType ==
>>> +            VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_ISA_SERIAL) {
>>> +            if (isa_serial_count >= VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS) {
>>> +                virReportError(VIR_ERR_INTERNAL_ERROR,
>>> +                               _("Maximum supported number of ISA serial
>>> ports is %d."), VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS);
> Use '%d' , please see
> https://urldefense.proofpoint.com/v2/url?u=https-3A__libvirt.org_coding-2Dstyle.html-23error-2Dmessage-2Dformat&d=DwIDaQ&c=s883GpUCOChKOHiocYtGcg&r=2QGHz-fTCVWImEBKe1ZcSe5t6UfasnhvdzD5DcixwOE&m=KNQ_Qw3y8qxj42KUdx9VcbmzQrwtyRwq2RiDkhMkNFypGybsocys4iwqrICwnIDn&s=n1ip3VFBqnojUNQYyHUmorNlMSHxKHm-rHK9BfGQ2lQ&e=
Got it ! Thanks.
>>> +                return -1;
>>> +            }
>>> +            isa_device_index_arr[isa_serial_count++] = i;
>>> +        }
>>> +        /* Check for the user defined ports and mark them used if in the
>>> range
>>> +         * of isa-serial ports, .i.e, from 0 to
>>> +         * VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS.
>>> +         */
>>> +        if (def->serials[i]->target.port != -1 &&
>>> +            def->serials[i]->target.port <
>>> VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS) {
>>> +            if (used_serial_port[def->serials[i]->target.port]) {
>>> +                virReportError(VIR_ERR_INTERNAL_ERROR,
>>> +                               _("target port [%d] already allocated."),
> Please conform to the error string formats as documented here:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__libvirt.org_coding-2Dstyle.html-23error-2Dmessage-2Dformat&d=DwIDaQ&c=s883GpUCOChKOHiocYtGcg&r=2QGHz-fTCVWImEBKe1ZcSe5t6UfasnhvdzD5DcixwOE&m=KNQ_Qw3y8qxj42KUdx9VcbmzQrwtyRwq2RiDkhMkNFypGybsocys4iwqrICwnIDn&s=n1ip3VFBqnojUNQYyHUmorNlMSHxKHm-rHK9BfGQ2lQ&e=
Sure. Instead of [%d] I will use '%d'. Thankyou.
>
>>> def->serials[i]->target.port);
>>> +                return -1;
>>> +            }
>>> +            used_serial_port[def->serials[i]->target.port] = true;
>>> +        }
>>> +
>>> +    }
>>> +
>>> +    /* Assign the ports to the devices. */
>>> +    for (i = 0; i < isa_serial_count; i++) {
>>> +        int isa_index = isa_device_index_arr[i];
>>> +        if (def->serials[isa_index]->target.port != -1)
>>> +            continue;
>>> +        for (j = 0; j < VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS; j++) {
>>> +            if (!used_serial_port[j]) {
>>> +                def->serials[isa_index]->target.port = j;
>>> +                used_serial_port[j] = true;
>>> +                break;
>>> +            }
>>> +        }
>>> +        if (def->serials[isa_index]->target.port == -1) {
>>> +            virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
>>> +                           _("out of ports for isa-serial device."));
>>> +            return -1;
>>> +        }
>>> +    }
>>> +    return 0;
>>> +}
>>> +
>>>    static void
>>>    virDomainChrDefPostParse(virDomainChrDef *chr,
>>>                             const virDomainDef *def)
>>> @@ -6186,6 +6241,9 @@ virDomainDefPostParse(virDomainDef *def,
>>>                goto cleanup;
>>>        }
>>>    +    if (virDomainChrIsaSerialDefPostParse(def) < 0)
>>> +            return -1;
>>> +
>>>        /* iterate the devices */
>>>        ret = virDomainDeviceInfoIterateFlags(def,
>>>                                              virDomainDefPostParseDeviceIterator,
>>> @@ -19857,14 +19915,6 @@ virDomainDefParseXML(xmlXPathContextPtr ctxt,
>>>            if (!chr)
>>>                return NULL;
>>>    -        if (chr->target.port == -1) {
>>> -            int maxport = -1;
>>> -            for (j = 0; j < i; j++) {
>>> -                if (def->serials[j]->target.port > maxport)
>>> -                    maxport = def->serials[j]->target.port;
>>> -            }
>>> -            chr->target.port = maxport + 1;
>>> -        }
>>>            def->serials[def->nserials++] = chr;
>>>        }
>>>        VIR_FREE(nodes);
>>> diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
>>> index c0c07ea6ba..be162e592c 100644
>>> --- a/src/conf/domain_conf.h
>>> +++ b/src/conf/domain_conf.h
>>> @@ -1179,6 +1179,7 @@ typedef enum {
>>>        VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_LAST
>>>    } virDomainChrConsoleTargetType;
>>>    +#define VIR_MAX_AVAILABLE_ISA_SERIAL_PORTS 4
>>>    typedef enum {
>>>        VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_NONE = 0,
>>>        VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_ISA_SERIAL,
>>> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
>>> index c47998aabd..797cdfb955 100644
>>> --- a/src/qemu/qemu_command.c
>>> +++ b/src/qemu/qemu_command.c
>>> @@ -10953,11 +10953,22 @@ qemuBuildSerialChrDeviceProps(const virDomainDef
>>> *def,
>>>            return NULL;
>>>        }
>>>    -    if (virJSONValueObjectAdd(&props,
>>> -                              "s:driver",
>>> virDomainChrSerialTargetModelTypeToString(serial->targetModel),
>>> -                              "s:chardev", chardev,
>>> -                              "s:id", serial->info.alias,
>>> -                              NULL) < 0)
>>> +    if (serial->targetModel ==
>>> VIR_DOMAIN_CHR_SERIAL_TARGET_MODEL_ISA_SERIAL) {
>>> +            if (virJSONValueObjectAdd(&props,
>>> +                                      "s:driver",
>>> +
>>> virDomainChrSerialTargetModelTypeToString(serial->targetModel),
>>> +                                      "s:chardev", chardev,
>>> +                                      "s:id", serial->info.alias,
>>> +                                      "k:index", serial->target.port,
>>> +                                      NULL) < 0)
>>> +                    return NULL;
>>> +    }
>>> +    else if (virJSONValueObjectAdd(&props,
>>> +                                   "s:driver",
>>> +
>>> virDomainChrSerialTargetModelTypeToString(serial->targetModel),
>>> +                                   "s:chardev", chardev,
>>> +                                   "s:id", serial->info.alias,
>>> +                                   NULL) < 0)
>>>            return NULL;
>>>          if (qemuBuildDeviceAddressProps(props, def, &serial->info) < 0)
>>> diff --git
>>> a/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live+console-virtio.xml
>>> b/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live+console-virtio.xml
>>> index 5d688e7748..295d75b768 100644
>>> ---
>>> a/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live+console-virtio.xml
>>> +++
>>> b/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live+console-virtio.xml
>>> @@ -74,7 +74,7 @@
>>>          <alias name='serial0'/>
>>>        </serial>
>>>        <serial type='pty'>
>>> -      <target type='isa-serial' port='0'>
>>> +      <target type='isa-serial' port='1'>
>>>            <model name='isa-serial'/>
>>>          </target>
>>>          <alias name='serial1'/>
>>> @@ -82,7 +82,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='bind' host='0.0.0.0' service='2445'/>
>>>          <protocol type='raw'/>
>>> -      <target type='isa-serial' port='1'>
>>> +      <target type='isa-serial' port='2'>
>>>            <model name='isa-serial'/>
>>>          </target>
>>>          <alias name='serial2'/>
>>> diff --git
>>> a/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live.xml
>>> b/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live.xml
>>> index b916f30412..850ebddf52 100644
>>> --- a/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live.xml
>>> +++ b/tests/qemuhotplugtestdomains/qemuhotplug-console-compat-2-live.xml
>>> @@ -74,7 +74,7 @@
>>>          <alias name='serial0'/>
>>>        </serial>
>>>        <serial type='pty'>
>>> -      <target type='isa-serial' port='0'>
>>> +      <target type='isa-serial' port='1'>
>>>            <model name='isa-serial'/>
>>>          </target>
>>>          <alias name='serial1'/>
>>> @@ -82,7 +82,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='bind' host='0.0.0.0' service='2445'/>
>>>          <protocol type='raw'/>
>>> -      <target type='isa-serial' port='1'>
>>> +      <target type='isa-serial' port='2'>
>>>            <model name='isa-serial'/>
>>>          </target>
>>>          <alias name='serial2'/>
>>> diff --git a/tests/qemuxml2argvdata/bios.args
>>> b/tests/qemuxml2argvdata/bios.args
>>> index 0469b7419e..62ec87541d 100644
>>> --- a/tests/qemuxml2argvdata/bios.args
>>> +++ b/tests/qemuxml2argvdata/bios.args
>>> @@ -31,7 +31,7 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device usb-tablet,id=input0,bus=usb.0,port=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/console-compat-auto.args
>>> b/tests/qemuxml2argvdata/console-compat-auto.args
>>> index 5285d0749a..9c459b641b 100644
>>> --- a/tests/qemuxml2argvdata/console-compat-auto.args
>>> +++ b/tests/qemuxml2argvdata/console-compat-auto.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/console-compat-chardev.args
>>> b/tests/qemuxml2argvdata/console-compat-chardev.args
>>> index 5285d0749a..9c459b641b 100644
>>> --- a/tests/qemuxml2argvdata/console-compat-chardev.args
>>> +++ b/tests/qemuxml2argvdata/console-compat-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/console-compat.args
>>> b/tests/qemuxml2argvdata/console-compat.args
>>> index 9f37788586..709a82faad 100644
>>> --- a/tests/qemuxml2argvdata/console-compat.args
>>> +++ b/tests/qemuxml2argvdata/console-compat.args
>>> @@ -30,5 +30,5 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/console-virtio-many.args
>>> b/tests/qemuxml2argvdata/console-virtio-many.args
>>> index dc1aca1129..b509cd55b5 100644
>>> --- a/tests/qemuxml2argvdata/console-virtio-many.args
>>> +++ b/tests/qemuxml2argvdata/console-virtio-many.args
>>> @@ -31,7 +31,7 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev pty,id=charconsole1 \
>>>    -device virtconsole,chardev=charconsole1,id=console1 \
>>>    -chardev pty,id=charconsole2 \
>>> diff --git a/tests/qemuxml2argvdata/controller-order.args
>>> b/tests/qemuxml2argvdata/controller-order.args
>>> index 51571a27bf..51fa04dfd8 100644
>>> --- a/tests/qemuxml2argvdata/controller-order.args
>>> +++ b/tests/qemuxml2argvdata/controller-order.args
>>> @@ -37,7 +37,7 @@ QEMU_AUDIO_DRV=spice \
>>>    -chardev spicevmc,id=charsmartcard0,name=smartcard \
>>>    -device
>>> ccid-card-passthru,chardev=charsmartcard0,id=smartcard0,bus=ccid0.0 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev spicevmc,id=charchannel0,name=vdagent \
>>>    -device
>>> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0
>>> \
>>>    -device usb-tablet,id=input0,bus=usb.0,port=1.2 \
>>> diff --git a/tests/qemuxml2argvdata/name-escape.x86_64-2.11.0.args
>>> b/tests/qemuxml2argvdata/name-escape.x86_64-2.11.0.args
>>> index 1ce91ff354..a57adedfa5 100644
>>> --- a/tests/qemuxml2argvdata/name-escape.x86_64-2.11.0.args
>>> +++ b/tests/qemuxml2argvdata/name-escape.x86_64-2.11.0.args
>>> @@ -32,9 +32,9 @@ QEMU_AUDIO_DRV=spice \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1,write-cache=on
>>> \
>>>    -device
>>> ccid-card-emulated,backend=certificates,cert1=cert1,,foo,cert2=cert2,cert3=cert3,db=/etc/pki/nssdb,,foo,id=smartcard0,bus=ccid0.0
>>> \
>>>    -chardev tty,id=charserial0,path=/dev/ttyS2,,foo \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=1 \
>>>    -chardev file,id=charserial1,path=/tmp/serial.log,,foo,append=on \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=0 \
>>>    -chardev pipe,id=charchannel0,path=/tmp/guestfwd,,foo \
>>>    -netdev user,guestfwd=tcp:10.0.2.1:4600-chardev:charchannel0,id=channel0 \
>>>    -vnc vnc=unix:/tmp/lib/domain--1-foo=1,,bar=2/vnc.sock \
>>> diff --git a/tests/qemuxml2argvdata/q35-virt-manager-basic.args
>>> b/tests/qemuxml2argvdata/q35-virt-manager-basic.args
>>> index 6e84c9ca2a..a33a74e355 100644
>>> --- a/tests/qemuxml2argvdata/q35-virt-manager-basic.args
>>> +++ b/tests/qemuxml2argvdata/q35-virt-manager-basic.args
>>> @@ -40,7 +40,7 @@ QEMU_AUDIO_DRV=spice \
>>>    -netdev user,id=hostnet0 \
>>>    -device
>>> virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:9a:e6:c6,bus=pci.1,addr=0x0
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev
>>> socket,id=charchannel0,path=/tmp/channel/domain--1-virt-manager-basic/org.qemu.guest_agent.0,server=on,wait=off
>>> \
>>>    -device
>>> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0
>>> \
>>>    -chardev spicevmc,id=charchannel1,name=vdagent \
>>> diff --git a/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args
>>> b/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args
>>> index dfa6785795..1f358b6469 100644
>>> --- a/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args
>>> +++ b/tests/qemuxml2argvdata/serial-dev-chardev-iobase.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev tty,id=charserial0,path=/dev/ttyS2 \
>>> --device isa-serial,chardev=charserial0,id=serial0,iobase=1016,irq=4 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0,iobase=1016,irq=4
>>> \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-dev-chardev.args
>>> b/tests/qemuxml2argvdata/serial-dev-chardev.args
>>> index c325f21e0c..47da5b8454 100644
>>> --- a/tests/qemuxml2argvdata/serial-dev-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-dev-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev tty,id=charserial0,path=/dev/ttyS2 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-file-chardev.args
>>> b/tests/qemuxml2argvdata/serial-file-chardev.args
>>> index 4cbd0edf1c..5b8f3be45a 100644
>>> --- a/tests/qemuxml2argvdata/serial-file-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-file-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev file,id=charserial0,path=/tmp/serial.log,append=on \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-file-log.args
>>> b/tests/qemuxml2argvdata/serial-file-log.args
>>> index c4c6106200..9ee066ef49 100644
>>> --- a/tests/qemuxml2argvdata/serial-file-log.args
>>> +++ b/tests/qemuxml2argvdata/serial-file-log.args
>>> @@ -30,5 +30,5 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> file,id=charserial0,path=/tmp/serial.log,logfile=/var/lib/libvirt/qemu/demo-serial.log,logappend=off
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-many-chardev.args
>>> b/tests/qemuxml2argvdata/serial-many-chardev.args
>>> index 2c548c9e4b..da0d0b21c3 100644
>>> --- a/tests/qemuxml2argvdata/serial-many-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-many-chardev.args
>>> @@ -30,8 +30,8 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev file,id=charserial1,path=/tmp/serial.log \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-pty-chardev.args
>>> b/tests/qemuxml2argvdata/serial-pty-chardev.args
>>> index 5285d0749a..9c459b641b 100644
>>> --- a/tests/qemuxml2argvdata/serial-pty-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-pty-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-spiceport.args
>>> b/tests/qemuxml2argvdata/serial-spiceport.args
>>> index 43e65a0679..704e6d1820 100644
>>> --- a/tests/qemuxml2argvdata/serial-spiceport.args
>>> +++ b/tests/qemuxml2argvdata/serial-spiceport.args
>>> @@ -29,7 +29,7 @@ QEMU_AUDIO_DRV=spice \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev spiceport,id=charserial0,name=org.qemu.console.serial.0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device usb-tablet,id=input0,bus=usb.0,port=1 \
>>>    -spice
>>> port=5903,tls-port=5904,addr=127.0.0.1,x509-dir=/etc/pki/libvirt-spice,seamless-migration=on
>>> \
>>>    -device
>>> qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,bus=pci.0,addr=0x2 \
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-chardev.args
>>> b/tests/qemuxml2argvdata/serial-tcp-chardev.args
>>> index aec7093d03..263add4409 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev socket,id=charserial0,host=127.0.0.1,port=9999 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args
>>> b/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args
>>> index 72f81d7938..13e092c4c7 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-telnet-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> socket,id=charserial0,host=127.0.0.1,port=9999,telnet=on,server=on,wait=off
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args
>>> index 7db40862e9..8bf070d820 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.args
>>> @@ -30,8 +30,8 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,localport=1111
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev socket,id=charserial1,host=127.0.0.1,port=5555 \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.xml
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.xml
>>> index 9b0b8b3e73..522f0184d3 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.xml
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-notls.xml
>>> @@ -37,7 +37,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='connect' host='127.0.0.1' service='5555' tls='no'/>
>>>          <protocol type='raw'/>
>>> -      <target type='isa-serial' port='0'>
>>> +      <target type='isa-serial' port='1'>
>>>            <model name='isa-serial'/>
>>>          </target>
>>>        </serial>
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args
>>> index f3dc5f5019..374d24ec00 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.args
>>> @@ -30,9 +30,9 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,localport=1111
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -object
>>> tls-creds-x509,id=objcharserial1_tls0,dir=/etc/pki/libvirt-chardev,endpoint=client,verify-peer=on
>>> \
>>>    -chardev
>>> socket,id=charserial1,host=127.0.0.1,port=5555,tls-creds=objcharserial1_tls0
>>> \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.xml
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.xml
>>> index 75c6c7f5f4..d41f5ee03e 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.xml
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev-verify.xml
>>> @@ -29,7 +29,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='connect' host='127.0.0.1' service='5555'/>
>>>          <protocol type='raw'/>
>>> -      <target port='0'/>
>>> +      <target port='1'/>
>>>        </serial>
>>>        <console type='udp'>
>>>          <source mode='bind' host='127.0.0.1' service='1111'/>
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args
>>> index f3dc5f5019..374d24ec00 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.args
>>> @@ -30,9 +30,9 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,localport=1111
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -object
>>> tls-creds-x509,id=objcharserial1_tls0,dir=/etc/pki/libvirt-chardev,endpoint=client,verify-peer=on
>>> \
>>>    -chardev
>>> socket,id=charserial1,host=127.0.0.1,port=5555,tls-creds=objcharserial1_tls0
>>> \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.xml
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.xml
>>> index 75c6c7f5f4..d41f5ee03e 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.xml
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-chardev.xml
>>> @@ -29,7 +29,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='connect' host='127.0.0.1' service='5555'/>
>>>          <protocol type='raw'/>
>>> -      <target port='0'/>
>>> +      <target port='1'/>
>>>        </serial>
>>>        <console type='udp'>
>>>          <source mode='bind' host='127.0.0.1' service='1111'/>
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args
>>> index 151629458b..2defeb28da 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.args
>>> @@ -30,10 +30,10 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> udp,id=charserial0,host=127.0.0.1,port=2222,localaddr=127.0.0.1,localport=1111
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -object
>>> secret,id=charserial1-secret0,data=9eao5F8qtkGt+seB1HYivWIxbtwUu6MQtg1zpj/oDtUsPr1q8wBYM91uEHCn6j/1,keyid=masterKey0,iv=AAECAwQFBgcICQoLDA0ODw==,format=base64
>>> \
>>>    -object
>>> tls-creds-x509,id=objcharserial1_tls0,dir=/etc/pki/libvirt-chardev,endpoint=client,verify-peer=on,passwordid=charserial1-secret0
>>> \
>>>    -chardev
>>> socket,id=charserial1,host=127.0.0.1,port=5555,tls-creds=objcharserial1_tls0
>>> \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.xml
>>> b/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.xml
>>> index 670f282b84..2bf954bc9f 100644
>>> --- a/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.xml
>>> +++ b/tests/qemuxml2argvdata/serial-tcp-tlsx509-secret-chardev.xml
>>> @@ -34,7 +34,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='connect' host='127.0.0.1' service='5555'/>
>>>          <protocol type='raw'/>
>>> -      <target port='0'/>
>>> +      <target port='1'/>
>>>        </serial>
>>>        <console type='udp'>
>>>          <source mode='bind' host='127.0.0.1' service='1111'/>
>>> diff --git a/tests/qemuxml2argvdata/serial-udp-chardev.args
>>> b/tests/qemuxml2argvdata/serial-udp-chardev.args
>>> index 9d2f2e03e9..de6621f0e2 100644
>>> --- a/tests/qemuxml2argvdata/serial-udp-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-udp-chardev.args
>>> @@ -30,8 +30,8 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev
>>> udp,id=charserial0,host=127.0.0.1,port=9998,localaddr=127.0.0.1,localport=9999
>>> \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev udp,id=charserial1,host=,port=9999,localaddr=,localport=0 \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-unix-chardev.args
>>> b/tests/qemuxml2argvdata/serial-unix-chardev.args
>>> index 19731b02b2..1e2444f824 100644
>>> --- a/tests/qemuxml2argvdata/serial-unix-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-unix-chardev.args
>>> @@ -28,8 +28,8 @@ QEMU_AUDIO_DRV=none \
>>>    -boot strict=on \
>>>    -usb \
>>>    -chardev socket,id=charserial0,path=/tmp/serial.sock \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev
>>> socket,id=charserial1,path=/tmp/serial-server.sock,server=on,wait=off \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/serial-unix-chardev.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/serial-unix-chardev.x86_64-latest.args
>>> index 1e3d5772b4..1387fc9a1d 100644
>>> --- a/tests/qemuxml2argvdata/serial-unix-chardev.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/serial-unix-chardev.x86_64-latest.args
>>> @@ -29,9 +29,9 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
>>>    -boot strict=on \
>>>    -device
>>> '{"driver":"piix3-usb-uhci","id":"usb","bus":"pci.0","addr":"0x1.0x2"}' \
>>>    -chardev socket,id=charserial0,path=/tmp/serial.sock \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -chardev socket,id=charserial1,fd=1729,server=on,wait=off \
>>> --device '{"driver":"isa-serial","chardev":"charserial1","id":"serial1"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial1","id":"serial1","index":1}' \
>>>    -audiodev '{"id":"audio1","driver":"none"}' \
>>>    -device
>>> '{"driver":"virtio-balloon-pci","id":"balloon0","bus":"pci.0","addr":"0x2"}'
>>> \
>>>    -sandbox
>>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
>>> diff --git a/tests/qemuxml2argvdata/serial-vc-chardev.args
>>> b/tests/qemuxml2argvdata/serial-vc-chardev.args
>>> index d28a3eee47..09b33a15ee 100644
>>> --- a/tests/qemuxml2argvdata/serial-vc-chardev.args
>>> +++ b/tests/qemuxml2argvdata/serial-vc-chardev.args
>>> @@ -30,6 +30,6 @@ QEMU_AUDIO_DRV=none \
>>>    -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
>>>    -device
>>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
>>>    -chardev vc,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
>>>    -msg timestamp=on
>>> diff --git a/tests/qemuxml2argvdata/user-aliases.args
>>> b/tests/qemuxml2argvdata/user-aliases.args
>>> index 486473a566..8608144b5e 100644
>>> --- a/tests/qemuxml2argvdata/user-aliases.args
>>> +++ b/tests/qemuxml2argvdata/user-aliases.args
>>> @@ -55,9 +55,9 @@ QEMU_AUDIO_DRV=none \
>>>    -device
>>> rtl8139,netdev=hostua-AndAlsoClientMode,id=ua-AndAlsoClientMode,mac=52:54:00:8c:b1:f8,bus=pci.0,addr=0xa
>>> \
>>>    -device
>>> ccid-card-emulated,backend=nss-emulated,id=smartcard0,bus=ua-myCCID.0 \
>>>    -chardev pty,id=charserial0 \
>>> --device isa-serial,chardev=charserial0,id=serial0 \
>>> +-device isa-serial,chardev=charserial0,id=serial0,index=0 \
>>>    -chardev pty,id=charserial1 \
>>> --device isa-serial,chardev=charserial1,id=serial1 \
>>> +-device isa-serial,chardev=charserial1,id=serial1,index=1 \
>>>    -chardev
>>> socket,id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/gentoo.org.qemu.guest_agent.0,server=on,wait=off
>>> \
>>>    -device
>>> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0
>>> \
>>>    -vnc 127.0.0.1:0 \
>>> diff --git a/tests/qemuxml2argvdata/virtio-9p-createmode.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/virtio-9p-createmode.x86_64-latest.args
>>> index 01fe01e3c6..d306b37b53 100644
>>> --- a/tests/qemuxml2argvdata/virtio-9p-createmode.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/virtio-9p-createmode.x86_64-latest.args
>>> @@ -37,7 +37,7 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
>>>    -fsdev local,security_model=mapped,id=fsdev-fs3,path=/export/fs3 \
>>>    -device
>>> '{"driver":"virtio-9p-pci","id":"fs3","fsdev":"fsdev-fs3","mount_tag":"fs3","bus":"pci.0","addr":"0x5"}'
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -audiodev '{"id":"audio1","driver":"none"}' \
>>>    -device
>>> '{"driver":"virtio-balloon-pci","id":"balloon0","bus":"pci.0","addr":"0xc"}'
>>> \
>>>    -sandbox
>>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
>>> diff --git a/tests/qemuxml2argvdata/virtio-9p-multidevs.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/virtio-9p-multidevs.x86_64-latest.args
>>> index 8b325bb7ec..0752f09fe9 100644
>>> --- a/tests/qemuxml2argvdata/virtio-9p-multidevs.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/virtio-9p-multidevs.x86_64-latest.args
>>> @@ -35,7 +35,7 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
>>>    -fsdev
>>> local,security_model=mapped,multidevs=warn,id=fsdev-fs2,path=/export/fs2 \
>>>    -device
>>> '{"driver":"virtio-9p-pci","id":"fs2","fsdev":"fsdev-fs2","mount_tag":"fs2","bus":"pci.0","addr":"0x4"}'
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -audiodev '{"id":"audio1","driver":"none"}' \
>>>    -device
>>> '{"driver":"virtio-balloon-pci","id":"balloon0","bus":"pci.0","addr":"0xc"}'
>>> \
>>>    -sandbox
>>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
>>> diff --git a/tests/qemuxml2argvdata/x86_64-pc-graphics.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/x86_64-pc-graphics.x86_64-latest.args
>>> index 3cae9fafa0..8cad1d9f38 100644
>>> --- a/tests/qemuxml2argvdata/x86_64-pc-graphics.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/x86_64-pc-graphics.x86_64-latest.args
>>> @@ -37,7 +37,7 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-guest/.config \
>>>    -netdev user,id=hostnet0 \
>>>    -device
>>> '{"driver":"virtio-net-pci","netdev":"hostnet0","id":"net0","mac":"52:54:00:4c:e3:86","bus":"pci.0","addr":"0x3"}'
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -chardev socket,id=charchannel0,fd=1729,server=on,wait=off \
>>>    -device
>>> '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}'
>>> \
>>>    -device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \
>>> diff --git a/tests/qemuxml2argvdata/x86_64-pc-headless.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/x86_64-pc-headless.x86_64-latest.args
>>> index fbfb823d83..3c4688a89e 100644
>>> --- a/tests/qemuxml2argvdata/x86_64-pc-headless.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/x86_64-pc-headless.x86_64-latest.args
>>> @@ -38,7 +38,7 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-guest/.config \
>>>    -netdev user,id=hostnet0 \
>>>    -device
>>> '{"driver":"virtio-net-pci","netdev":"hostnet0","id":"net0","mac":"52:54:00:09:a4:37","bus":"pci.0","addr":"0x2"}'
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -chardev socket,id=charchannel0,fd=1729,server=on,wait=off \
>>>    -device
>>> '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}'
>>> \
>>>    -audiodev '{"id":"audio1","driver":"none"}' \
>>> diff --git a/tests/qemuxml2argvdata/x86_64-q35-graphics.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/x86_64-q35-graphics.x86_64-latest.args
>>> index ca0e00f468..9e4c361ec9 100644
>>> --- a/tests/qemuxml2argvdata/x86_64-q35-graphics.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/x86_64-q35-graphics.x86_64-latest.args
>>> @@ -44,7 +44,7 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-guest/.config \
>>>    -netdev user,id=hostnet0 \
>>>    -device
>>> '{"driver":"virtio-net-pci","netdev":"hostnet0","id":"net0","mac":"52:54:00:d2:70:0b","bus":"pci.1","addr":"0x0"}'
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -chardev socket,id=charchannel0,fd=1729,server=on,wait=off \
>>>    -device
>>> '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}'
>>> \
>>>    -device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \
>>> diff --git a/tests/qemuxml2argvdata/x86_64-q35-headless.x86_64-latest.args
>>> b/tests/qemuxml2argvdata/x86_64-q35-headless.x86_64-latest.args
>>> index c6970e349d..b4d90dff5e 100644
>>> --- a/tests/qemuxml2argvdata/x86_64-q35-headless.x86_64-latest.args
>>> +++ b/tests/qemuxml2argvdata/x86_64-q35-headless.x86_64-latest.args
>>> @@ -45,7 +45,7 @@ XDG_CONFIG_HOME=/tmp/lib/domain--1-guest/.config \
>>>    -netdev user,id=hostnet0 \
>>>    -device
>>> '{"driver":"virtio-net-pci","netdev":"hostnet0","id":"net0","mac":"52:54:00:09:a4:37","bus":"pci.1","addr":"0x0"}'
>>> \
>>>    -chardev pty,id=charserial0 \
>>> --device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \
>>> +-device
>>> '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
>>>    -chardev socket,id=charchannel0,fd=1729,server=on,wait=off \
>>>    -device
>>> '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}'
>>> \
>>>    -audiodev '{"id":"audio1","driver":"none"}' \
>>> diff --git a/tests/qemuxml2xmloutdata/serial-tcp-tlsx509-chardev.xml
>>> b/tests/qemuxml2xmloutdata/serial-tcp-tlsx509-chardev.xml
>>> index 7fde19f283..de11465233 100644
>>> --- a/tests/qemuxml2xmloutdata/serial-tcp-tlsx509-chardev.xml
>>> +++ b/tests/qemuxml2xmloutdata/serial-tcp-tlsx509-chardev.xml
>>> @@ -37,7 +37,7 @@
>>>        <serial type='tcp'>
>>>          <source mode='connect' host='127.0.0.1' service='5555'/>
>>>          <protocol type='raw'/>
>>> -      <target type='isa-serial' port='0'>
>>> +      <target type='isa-serial' port='1'>
>>>            <model name='isa-serial'/>
>>>          </target>
>>>        </serial>
>>
> >





More information about the libvir-list mailing list