[libvirt PATCH 31/51] qemu/qemu_validate: Update format strings in translated messages
Jiri Denemark
jdenemar at redhat.com
Fri Mar 10 16:09:47 UTC 2023
Signed-off-by: Jiri Denemark <jdenemar at redhat.com>
---
src/conf/domain_validate.c | 2 +-
src/qemu/qemu_validate.c | 317 +++++++++++++++++--------------------
2 files changed, 142 insertions(+), 177 deletions(-)
diff --git a/src/conf/domain_validate.c b/src/conf/domain_validate.c
index d30bb31dda..c20d3fe1d7 100644
--- a/src/conf/domain_validate.c
+++ b/src/conf/domain_validate.c
@@ -230,7 +230,7 @@ virDomainVideoDefValidate(const virDomainVideoDef *video,
return -1;
if (video->blob != VIR_TRISTATE_SWITCH_ABSENT) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("video type '%s' does not support blob resources"),
+ _("video type '%1$s' does not support blob resources"),
virDomainVideoTypeToString(video->type));
return -1;
}
diff --git a/src/qemu/qemu_validate.c b/src/qemu/qemu_validate.c
index 0146220d8f..baebb6becf 100644
--- a/src/qemu/qemu_validate.c
+++ b/src/qemu/qemu_validate.c
@@ -45,8 +45,7 @@ qemuValidateDomainDefPSeriesFeature(const virDomainDef *def,
if (def->features[feature] != VIR_TRISTATE_SWITCH_ABSENT &&
!qemuDomainIsPSeries(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' feature is not supported for "
- "architecture '%s' or machine type '%s'"),
+ _("The '%1$s' feature is not supported for architecture '%2$s' or machine type '%3$s'"),
virDomainFeatureTypeToString(feature),
virArchToString(def->os.arch),
def->os.machine);
@@ -180,8 +179,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
if (def->features[i] != VIR_DOMAIN_IOAPIC_NONE) {
if (!ARCH_IS_X86(def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' feature is not supported for "
- "architecture '%s' or machine type '%s'"),
+ _("The '%1$s' feature is not supported for architecture '%2$s' or machine type '%3$s'"),
featureName,
virArchToString(def->os.arch),
def->os.machine);
@@ -205,8 +203,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
if (def->features[i] == VIR_TRISTATE_SWITCH_ON &&
!qemuDomainIsARMVirt(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' feature is not supported for "
- "architecture '%s' or machine type '%s'"),
+ _("The '%1$s' feature is not supported for architecture '%2$s' or machine type '%3$s'"),
featureName,
virArchToString(def->os.arch),
def->os.machine);
@@ -241,9 +238,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
def->apic_eoi != VIR_TRISTATE_SWITCH_ABSENT &&
!ARCH_IS_X86(def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The 'eoi' attribute of the '%s' feature "
- "is not supported for architecture '%s' or "
- "machine type '%s'"),
+ _("The 'eoi' attribute of the '%1$s' feature is not supported for architecture '%2$s' or machine type '%3$s'"),
featureName,
virArchToString(def->os.arch),
def->os.machine);
@@ -255,8 +250,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
if (def->features[i] != VIR_TRISTATE_SWITCH_ABSENT &&
!ARCH_IS_X86(def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' feature is not supported for "
- "architecture '%s' or machine type '%s'"),
+ _("The '%1$s' feature is not supported for architecture '%2$s' or machine type '%3$s'"),
featureName,
virArchToString(def->os.arch),
def->os.machine);
@@ -268,8 +262,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
if (def->features[i] != VIR_DOMAIN_HYPERV_MODE_NONE &&
!ARCH_IS_X86(def->os.arch) && !qemuDomainIsARMVirt(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Hyperv features are not supported for "
- "architecture '%s' or machine type '%s'"),
+ _("Hyperv features are not supported for architecture '%1$s' or machine type '%2$s'"),
virArchToString(def->os.arch),
def->os.machine);
return -1;
@@ -280,7 +273,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
if (def->features[i] == VIR_TRISTATE_SWITCH_OFF &&
ARCH_IS_PPC64(def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("PMU is always enabled for architecture '%s'"),
+ _("PMU is always enabled for architecture '%1$s'"),
virArchToString(def->os.arch));
return -1;
}
@@ -290,7 +283,7 @@ qemuValidateDomainDefFeatures(const virDomainDef *def,
if (def->features[i] == VIR_TRISTATE_SWITCH_ON) {
if (def->virtType != VIR_DOMAIN_VIRT_QEMU) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("TCG features are incompatible with domain type '%s'"),
+ _("TCG features are incompatible with domain type '%1$s'"),
virDomainVirtTypeToString(def->virtType));
return -1;
}
@@ -337,7 +330,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
if (!ARCH_IS_X86(def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CPU maximum physical address bits specification is not supported for '%s' architecture"),
+ _("CPU maximum physical address bits specification is not supported for '%1$s' architecture"),
virArchToString(def->os.arch));
return -1;
}
@@ -346,7 +339,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
case VIR_CPU_MAX_PHYS_ADDR_MODE_PASSTHROUGH:
if (addr->bits != -1) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CPU maximum physical address bits number specification cannot be used with mode='%s'"),
+ _("CPU maximum physical address bits number specification cannot be used with mode='%1$s'"),
virCPUMaxPhysAddrModeTypeToString(VIR_CPU_MAX_PHYS_ADDR_MODE_PASSTHROUGH));
return -1;
}
@@ -355,7 +348,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
case VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE:
if (addr->bits == -1) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("if using CPU maximum physical address mode='%s', bits= must be specified too"),
+ _("if using CPU maximum physical address mode='%1$s', bits= must be specified too"),
virCPUMaxPhysAddrModeTypeToString(VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE));
return -1;
}
@@ -379,7 +372,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
if (!ARCH_IS_X86(def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CPU cache specification is not supported for '%s' architecture"),
+ _("CPU cache specification is not supported for '%1$s' architecture"),
virArchToString(def->os.arch));
return -1;
}
@@ -388,7 +381,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
case VIR_CPU_CACHE_MODE_EMULATE:
if (cache->level != 3) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CPU cache mode '%s' can only be used with level='3'"),
+ _("CPU cache mode '%1$s' can only be used with level='3'"),
virCPUCacheModeTypeToString(cache->mode));
return -1;
}
@@ -398,7 +391,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
if (def->cpu->mode != VIR_CPU_MODE_HOST_PASSTHROUGH &&
def->cpu->mode != VIR_CPU_MODE_MAXIMUM) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CPU cache mode '%s' can only be used with '%s' / '%s' CPUs"),
+ _("CPU cache mode '%1$s' can only be used with '%2$s' / '%3$s' CPUs"),
virCPUCacheModeTypeToString(cache->mode),
virCPUModeTypeToString(VIR_CPU_MODE_HOST_PASSTHROUGH),
virCPUModeTypeToString(VIR_CPU_MODE_MAXIMUM));
@@ -407,7 +400,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
if (cache->level != -1) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported CPU cache level for mode '%s'"),
+ _("unsupported CPU cache level for mode '%1$s'"),
virCPUCacheModeTypeToString(cache->mode));
return -1;
}
@@ -416,7 +409,7 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver,
case VIR_CPU_CACHE_MODE_DISABLE:
if (cache->level != -1) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported CPU cache level for mode '%s'"),
+ _("unsupported CPU cache level for mode '%1$s'"),
virCPUCacheModeTypeToString(cache->mode));
return -1;
}
@@ -511,7 +504,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
switch ((virDomainTimerNameType)timer->name) {
case VIR_DOMAIN_TIMER_NAME_PLATFORM:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported timer type (name) '%s'"),
+ _("unsupported timer type (name) '%1$s'"),
virDomainTimerNameTypeToString(timer->name));
return -1;
@@ -520,8 +513,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
case VIR_DOMAIN_TIMER_NAME_HYPERVCLOCK:
if (!ARCH_IS_X86(def->os.arch) && timer->present == VIR_TRISTATE_BOOL_YES) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Configuring the '%s' timer is not supported "
- "for virtType=%s arch=%s machine=%s guests"),
+ _("Configuring the '%1$s' timer is not supported for virtType=%2$s arch=%3$s machine=%4$s guests"),
virDomainTimerNameTypeToString(timer->name),
virDomainVirtTypeToString(def->virtType),
virArchToString(def->os.arch),
@@ -542,7 +534,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
break;
case VIR_DOMAIN_TIMER_TRACK_BOOT:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported rtc timer track '%s'"),
+ _("unsupported rtc timer track '%1$s'"),
virDomainTimerTrackTypeToString(timer->track));
return -1;
case VIR_DOMAIN_TIMER_TRACK_LAST:
@@ -561,7 +553,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
case VIR_DOMAIN_TIMER_TICKPOLICY_MERGE:
case VIR_DOMAIN_TIMER_TICKPOLICY_DISCARD:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported rtc timer tickpolicy '%s'"),
+ _("unsupported rtc timer tickpolicy '%1$s'"),
virDomainTimerTickpolicyTypeToString(
timer->tickpolicy));
return -1;
@@ -580,7 +572,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_KVM_PIT_TICK_POLICY)) {
/* can't catchup if we don't have kvm-pit */
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported pit tickpolicy '%s'"),
+ _("unsupported pit tickpolicy '%1$s'"),
virDomainTimerTickpolicyTypeToString(
timer->tickpolicy));
return -1;
@@ -589,7 +581,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
case VIR_DOMAIN_TIMER_TICKPOLICY_MERGE:
/* no way to support this mode for pit in qemu */
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported pit tickpolicy '%s'"),
+ _("unsupported pit tickpolicy '%1$s'"),
virDomainTimerTickpolicyTypeToString(
timer->tickpolicy));
return -1;
@@ -613,8 +605,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
if (def->virtType != VIR_DOMAIN_VIRT_KVM ||
!qemuDomainIsARMVirt(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Configuring the '%s' timer is not supported "
- "for virtType=%s arch=%s machine=%s guests"),
+ _("Configuring the '%1$s' timer is not supported for virtType=%2$s arch=%3$s machine=%4$s guests"),
virDomainTimerNameTypeToString(timer->name),
virDomainVirtTypeToString(def->virtType),
virArchToString(def->os.arch),
@@ -623,14 +614,13 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
}
if (timer->present == VIR_TRISTATE_BOOL_NO) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' timer can't be disabled"),
+ _("The '%1$s' timer can't be disabled"),
virDomainTimerNameTypeToString(timer->name));
return -1;
}
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_CPU_KVM_NO_ADJVTIME)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Configuring the '%s' timer is not supported "
- "with this QEMU binary"),
+ _("Configuring the '%1$s' timer is not supported with this QEMU binary"),
virDomainTimerNameTypeToString(timer->name));
return -1;
}
@@ -643,7 +633,7 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def,
case VIR_DOMAIN_TIMER_TICKPOLICY_CATCHUP:
case VIR_DOMAIN_TIMER_TICKPOLICY_MERGE:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' timer does not support tickpolicy '%s'"),
+ _("The '%1$s' timer does not support tickpolicy '%2$s'"),
virDomainTimerNameTypeToString(timer->name),
virDomainTimerTickpolicyTypeToString(timer->tickpolicy));
return -1;
@@ -727,7 +717,7 @@ qemuValidateDomainDefNvram(const virDomainDef *def,
case VIR_STORAGE_TYPE_NVME:
case VIR_STORAGE_TYPE_VHOST_USER:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported nvram disk type '%s'"),
+ _("unsupported nvram disk type '%1$s'"),
virStorageTypeToString(src->type));
return -1;
@@ -847,8 +837,8 @@ qemuValidateDomainVCpuTopology(const virDomainDef *def, virQEMUCaps *qemuCaps)
if (maxCpus > 0 && virDomainDefGetVcpusMax(def) > maxCpus) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Maximum CPUs greater than specified machine "
- "type limit %u"), maxCpus);
+ _("Maximum CPUs greater than specified machine type limit %1$u"),
+ maxCpus);
return -1;
}
@@ -882,8 +872,7 @@ qemuValidateDomainVCpuTopology(const virDomainDef *def, virQEMUCaps *qemuCaps)
granularity = qemuValidateDefGetVcpuHotplugGranularity(def);
if ((virDomainDefGetVcpus(def) % granularity) != 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("vCPUs count must be a multiple of the vCPU "
- "hotplug granularity (%u)"),
+ _("vCPUs count must be a multiple of the vCPU hotplug granularity (%1$u)"),
granularity);
return -1;
}
@@ -893,15 +882,13 @@ qemuValidateDomainVCpuTopology(const virDomainDef *def, virQEMUCaps *qemuCaps)
virDomainDefGetVcpusMax(def) > QEMU_MAX_VCPUS_WITHOUT_EIM) {
if (!qemuDomainIsQ35(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("more than %d vCPUs are only supported on "
- "q35-based machine types"),
+ _("more than %1$d vCPUs are only supported on q35-based machine types"),
QEMU_MAX_VCPUS_WITHOUT_EIM);
return -1;
}
if (!def->iommu || def->iommu->eim != VIR_TRISTATE_SWITCH_ON) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("more than %d vCPUs require extended interrupt "
- "mode enabled on the iommu device"),
+ _("more than %1$d vCPUs require extended interrupt mode enabled on the iommu device"),
QEMU_MAX_VCPUS_WITHOUT_EIM);
return -1;
}
@@ -960,8 +947,7 @@ qemuValidateDomainDefMemory(const virDomainDef *def,
mem->access != VIR_DOMAIN_MEMORY_ACCESS_DEFAULT &&
mem->access != VIR_DOMAIN_MEMORY_ACCESS_PRIVATE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("memory access mode '%s' not supported "
- "without guest numa node"),
+ _("memory access mode '%1$s' not supported without guest numa node"),
virDomainMemoryAccessTypeToString(mem->access));
return -1;
}
@@ -1019,7 +1005,7 @@ qemuValidateDomainDefConsole(const virDomainDef *def,
default:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported console target type %s"),
+ _("unsupported console target type %1$s"),
NULLSTR(virDomainChrConsoleTargetTypeToString(console->targetType)));
return -1;
}
@@ -1291,28 +1277,28 @@ qemuValidateDomainDef(const virDomainDef *def,
if (def->os.type != VIR_DOMAIN_OSTYPE_HVM) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Emulator '%s' does not support os type '%s'"),
+ _("Emulator '%1$s' does not support os type '%2$s'"),
def->emulator, virDomainOSTypeToString(def->os.type));
return -1;
}
if (!virQEMUCapsIsArchSupported(qemuCaps, def->os.arch)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Emulator '%s' does not support arch '%s'"),
+ _("Emulator '%1$s' does not support arch '%2$s'"),
def->emulator, virArchToString(def->os.arch));
return -1;
}
if (!virQEMUCapsIsVirtTypeSupported(qemuCaps, def->virtType)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Emulator '%s' does not support virt type '%s'"),
+ _("Emulator '%1$s' does not support virt type '%2$s'"),
def->emulator, virDomainVirtTypeToString(def->virtType));
return -1;
}
if (!virQEMUCapsIsMachineSupported(qemuCaps, def->virtType, def->os.machine)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Emulator '%s' does not support machine type '%s'"),
+ _("Emulator '%1$s' does not support machine type '%2$s'"),
def->emulator, def->os.machine);
return -1;
}
@@ -1320,7 +1306,7 @@ qemuValidateDomainDef(const virDomainDef *def,
if (virQEMUCapsMachineSupportsACPI(qemuCaps, def->virtType, def->os.machine) == VIR_TRISTATE_BOOL_NO &&
def->features[VIR_DOMAIN_FEATURE_ACPI] == VIR_TRISTATE_SWITCH_ON) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("machine type '%s' does not support ACPI"),
+ _("machine type '%1$s' does not support ACPI"),
def->os.machine);
return -1;
}
@@ -1498,8 +1484,7 @@ qemuValidateDomainDeviceDefZPCIAddress(virDomainDeviceInfo *info,
(zpci->uid.value > VIR_DOMAIN_DEVICE_ZPCI_MAX_UID ||
zpci->uid.value == 0)) {
virReportError(VIR_ERR_XML_ERROR,
- _("Invalid PCI address uid='0x%.4x', "
- "must be > 0x0000 and <= 0x%.4x"),
+ _("Invalid PCI address uid='0x%1$.4x', must be > 0x0000 and <= 0x%2$.4x"),
zpci->uid.value,
VIR_DOMAIN_DEVICE_ZPCI_MAX_UID);
return -1;
@@ -1641,8 +1626,7 @@ qemuValidateDomainDeviceDefAddress(const virDomainDeviceDef *dev,
if (addr->has_reg && addr->reg > 0xffffffff) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("spapr-vio reg='0x%llx' exceeds maximum "
- "possible value (0xffffffff)"),
+ _("spapr-vio reg='0x%1$llx' exceeds maximum possible value (0xffffffff)"),
addr->reg);
return -1;
}
@@ -1658,7 +1642,7 @@ qemuValidateDomainDeviceDefAddress(const virDomainDeviceDef *dev,
case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW:
if (!qemuDomainIsS390CCW(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("cannot use CCW address type for device '%s' using machine type '%s'"),
+ _("cannot use CCW address type for device '%1$s' using machine type '%2$s'"),
NULLSTR(info->alias), def->os.machine);
return -1;
}
@@ -1793,7 +1777,7 @@ qemuValidateDomainDefVhostUserRequireSharedMemory(const virDomainDef *def,
if (numa_nodes == 0 &&
!(defaultRAMId && def->mem.access == VIR_DOMAIN_MEMORY_ACCESS_SHARED)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("'%s' requires shared memory"), name);
+ _("'%1$s' requires shared memory"), name);
return -1;
}
@@ -1805,7 +1789,7 @@ qemuValidateDomainDefVhostUserRequireSharedMemory(const virDomainDef *def,
case VIR_DOMAIN_MEMORY_ACCESS_DEFAULT:
if (def->mem.access != VIR_DOMAIN_MEMORY_ACCESS_SHARED) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("'%s' requires shared memory"), name);
+ _("'%1$s' requires shared memory"), name);
return -1;
}
break;
@@ -1813,7 +1797,7 @@ qemuValidateDomainDefVhostUserRequireSharedMemory(const virDomainDef *def,
break;
case VIR_DOMAIN_MEMORY_ACCESS_PRIVATE:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("'%s' requires shared memory"), name);
+ _("'%1$s' requires shared memory"), name);
return -1;
case VIR_DOMAIN_MEMORY_ACCESS_LAST:
@@ -1886,7 +1870,7 @@ qemuValidateDomainDeviceDefNetwork(const virDomainNetDef *net,
if (ip->prefix && ip->prefix != 64) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported IPv6 address prefix='%u' - must be 64"),
+ _("unsupported IPv6 address prefix='%1$u' - must be 64"),
ip->prefix);
return -1;
}
@@ -1907,7 +1891,7 @@ qemuValidateDomainDeviceDefNetwork(const virDomainNetDef *net,
if (net->model != VIR_DOMAIN_NET_MODEL_VIRTIO) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("invalid model for interface of type '%s': '%s'"),
+ _("invalid model for interface of type '%1$s': '%2$s'"),
virDomainNetTypeToString(net->type),
virDomainNetModelTypeToString(net->model));
return -1;
@@ -1955,7 +1939,7 @@ qemuValidateDomainDeviceDefNetwork(const virDomainNetDef *net,
if (net->mtu &&
!qemuDomainNetSupportsMTU(net->type, net->backend.type)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("setting MTU on interface type %s is not supported yet"),
+ _("setting MTU on interface type %1$s is not supported yet"),
virDomainNetTypeToString(net->type));
return -1;
}
@@ -1964,7 +1948,7 @@ qemuValidateDomainDeviceDefNetwork(const virDomainNetDef *net,
if (net->teaming->type == VIR_DOMAIN_NET_TEAMING_TYPE_PERSISTENT
&& !virDomainNetIsVirtioModel(net)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("virtio-net teaming persistent interface must be <model type='virtio'/>, not '%s'"),
+ _("virtio-net teaming persistent interface must be <model type='virtio'/>, not '%1$s'"),
virDomainNetGetModelString(net));
return -1;
}
@@ -1972,7 +1956,7 @@ qemuValidateDomainDeviceDefNetwork(const virDomainNetDef *net,
net->type != VIR_DOMAIN_NET_TYPE_HOSTDEV &&
net->type != VIR_DOMAIN_NET_TYPE_NETWORK) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("virtio-net teaming transient interface must be type='hostdev', not '%s'"),
+ _("virtio-net teaming transient interface must be type='hostdev', not '%1$s'"),
virDomainNetTypeToString(net->type));
return -1;
}
@@ -1980,7 +1964,7 @@ qemuValidateDomainDeviceDefNetwork(const virDomainNetDef *net,
if (net->coalesce && !qemuValidateNetSupportsCoalesce(net->type)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("coalesce settings on interface type %s are not supported"),
+ _("coalesce settings on interface type %1$s are not supported"),
virDomainNetTypeToString(net->type));
return -1;
}
@@ -2077,7 +2061,7 @@ qemuValidateDomainChrTargetDef(const virDomainChrDef *chr)
if (chr->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE &&
chr->info.type != expected) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Target type '%s' requires address type '%s'"),
+ _("Target type '%1$s' requires address type '%2$s'"),
virDomainChrSerialTargetTypeToString(chr->targetType),
virDomainDeviceAddressTypeToString(expected));
return -1;
@@ -2088,8 +2072,7 @@ qemuValidateDomainChrTargetDef(const virDomainChrDef *chr)
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_SCLP:
if (chr->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Target type '%s' cannot have an "
- "associated address"),
+ _("Target type '%1$s' cannot have an associated address"),
virDomainChrSerialTargetTypeToString(chr->targetType));
return -1;
}
@@ -2116,7 +2099,7 @@ qemuValidateDomainChrTargetDef(const virDomainChrDef *chr)
if (chr->targetType != expected) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Target model '%s' requires target type '%s'"),
+ _("Target model '%1$s' requires target type '%2$s'"),
virDomainChrSerialTargetModelTypeToString(chr->targetModel),
virDomainChrSerialTargetTypeToString(expected));
return -1;
@@ -2160,7 +2143,7 @@ qemuValidateDomainChrSourceDef(const virDomainChrSourceDef *def,
case VIR_DOMAIN_CHR_TYPE_QEMU_VDAGENT:
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_CHARDEV_QEMU_VDAGENT)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("chardev '%s' not supported in this QEMU binary"),
+ _("chardev '%1$s' not supported in this QEMU binary"),
virDomainChrTypeToString(def->type));
return -1;
}
@@ -2170,7 +2153,7 @@ qemuValidateDomainChrSourceDef(const virDomainChrSourceDef *def,
case VIR_DOMAIN_CHR_TYPE_SPICEPORT:
if (!virDomainDefHasSpiceGraphics(vmdef)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("chardev '%s' not supported without spice graphics"),
+ _("chardev '%1$s' not supported without spice graphics"),
virDomainChrTypeToString(def->type));
return -1;
}
@@ -2241,9 +2224,7 @@ qemuValidateDomainChrDef(const virDomainChrDef *dev,
if (!isCompatible) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Serial device with target type '%s' and "
- "target model '%s' not compatible with guest "
- "architecture or machine type"),
+ _("Serial device with target type '%1$s' and target model '%2$s' not compatible with guest architecture or machine type"),
virDomainChrSerialTargetTypeToString(dev->targetType),
virDomainChrSerialTargetModelTypeToString(dev->targetModel));
return -1;
@@ -2357,7 +2338,7 @@ qemuValidateDomainRNGDef(const virDomainRNGDef *def,
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(rngCaps.model, def->model)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("domain configuration does not support rng model '%s'"),
+ _("domain configuration does not support rng model '%1$s'"),
virDomainRNGModelTypeToString(def->model));
return -1;
}
@@ -2376,7 +2357,7 @@ qemuValidateDomainRedirdevDef(const virDomainRedirdevDef *dev,
if (dev->bus != VIR_DOMAIN_REDIRDEV_BUS_USB) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Redirection bus %s is not supported by QEMU"),
+ _("Redirection bus %1$s is not supported by QEMU"),
virDomainRedirdevBusTypeToString(dev->bus));
return -1;
}
@@ -2409,7 +2390,7 @@ qemuValidateDomainWatchdogDef(const virDomainWatchdogDef *dev,
if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE &&
dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s model of watchdog can go only on PCI bus"),
+ _("%1$s model of watchdog can go only on PCI bus"),
virDomainWatchdogModelTypeToString(dev->model));
return -1;
}
@@ -2418,7 +2399,7 @@ qemuValidateDomainWatchdogDef(const virDomainWatchdogDef *dev,
case VIR_DOMAIN_WATCHDOG_MODEL_IB700:
if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s model of watchdog does not support configuring the address"),
+ _("%1$s model of watchdog does not support configuring the address"),
virDomainWatchdogModelTypeToString(dev->model));
return -1;
}
@@ -2427,13 +2408,13 @@ qemuValidateDomainWatchdogDef(const virDomainWatchdogDef *dev,
case VIR_DOMAIN_WATCHDOG_MODEL_DIAG288:
if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s model of watchdog is virtual and cannot go on any bus."),
+ _("%1$s model of watchdog is virtual and cannot go on any bus."),
virDomainWatchdogModelTypeToString(dev->model));
return -1;
}
if (!(ARCH_IS_S390(def->os.arch))) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s model of watchdog is allowed for s390 and s390x only"),
+ _("%1$s model of watchdog is allowed for s390 and s390x only"),
virDomainWatchdogModelTypeToString(dev->model));
return -1;
}
@@ -2442,13 +2423,13 @@ qemuValidateDomainWatchdogDef(const virDomainWatchdogDef *dev,
case VIR_DOMAIN_WATCHDOG_MODEL_ITCO:
if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s model of watchdog is part of the machine and cannot have any address set."),
+ _("%1$s model of watchdog is part of the machine and cannot have any address set."),
virDomainWatchdogModelTypeToString(dev->model));
return -1;
}
if (!qemuDomainIsQ35(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s model of watchdog is only part of q35 machine"),
+ _("%1$s model of watchdog is only part of q35 machine"),
virDomainWatchdogModelTypeToString(dev->model));
return -1;
}
@@ -2605,8 +2586,7 @@ qemuValidateDomainDeviceDefHostdev(const virDomainHostdevDef *hostdev,
/* forbid capabilities mode hostdev in this kind of hypervisor */
if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("hostdev mode 'capabilities' is not "
- "supported in %s"),
+ _("hostdev mode 'capabilities' is not supported in %1$s"),
virDomainVirtTypeToString(def->virtType));
return -1;
}
@@ -2689,7 +2669,7 @@ qemuValidateDomainDeviceDefVideo(const virDomainVideoDef *video,
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(videoCaps.modelType, video->type)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("domain configuration does not support video model '%s'"),
+ _("domain configuration does not support video model '%1$s'"),
virDomainVideoTypeToString(video->type));
return -1;
}
@@ -2698,14 +2678,14 @@ qemuValidateDomainDeviceDefVideo(const virDomainVideoDef *video,
video->type != VIR_DOMAIN_VIDEO_TYPE_VIRTIO) {
if (!video->primary) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("video type '%s' is only valid as primary video device"),
+ _("video type '%1$s' is only valid as primary video device"),
virDomainVideoTypeToString(video->type));
return -1;
}
if (video->heads != 1) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("video type '%s' doesn't support multiple 'heads'"),
+ _("video type '%1$s' doesn't support multiple 'heads'"),
virDomainVideoTypeToString(video->type));
return -1;
}
@@ -2720,13 +2700,13 @@ qemuValidateDomainDeviceDefVideo(const virDomainVideoDef *video,
if (video->type == VIR_DOMAIN_VIDEO_TYPE_QXL) {
if (video->vram > (UINT_MAX / 1024)) {
virReportError(VIR_ERR_OVERFLOW,
- _("value for 'vram' must be less than '%u'"),
+ _("value for 'vram' must be less than '%1$u'"),
UINT_MAX / 1024);
return -1;
}
if (video->ram > (UINT_MAX / 1024)) {
virReportError(VIR_ERR_OVERFLOW,
- _("value for 'ram' must be less than '%u'"),
+ _("value for 'ram' must be less than '%1$u'"),
UINT_MAX / 1024);
return -1;
}
@@ -2821,7 +2801,7 @@ qemuValidateDomainDeviceDefDiskSerial(const char *value)
{
if (strspn(value, QEMU_SERIAL_PARAM_ACCEPTED_CHARS) != strlen(value)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("driver serial '%s' contains unsafe characters"),
+ _("driver serial '%1$s' contains unsafe characters"),
value);
return -1;
}
@@ -2849,7 +2829,7 @@ qemuValidateDomainDeviceDefDiskIOThreads(const virDomainDef *def,
case VIR_DOMAIN_DISK_BUS_NONE:
case VIR_DOMAIN_DISK_BUS_LAST:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOThreads not available for bus %s target %s"),
+ _("IOThreads not available for bus %1$s target %2$s"),
virDomainDiskBusTypeToString(disk->bus), disk->dst);
return false;
}
@@ -2857,7 +2837,7 @@ qemuValidateDomainDeviceDefDiskIOThreads(const virDomainDef *def,
/* Can we find the disk iothread in the iothreadid list? */
if (!virDomainIOThreadIDFind(def, disk->iothread)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Disk iothread '%u' not defined in iothreadid"),
+ _("Disk iothread '%1$u' not defined in iothreadid"),
disk->iothread);
return false;
}
@@ -2877,7 +2857,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->bus == VIR_DOMAIN_DISK_BUS_USB ||
disk->bus == VIR_DOMAIN_DISK_BUS_SD) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CHS geometry can not be set for '%s' bus"),
+ _("CHS geometry can not be set for '%1$s' bus"),
virDomainDiskBusTypeToString(disk->bus));
return -1;
}
@@ -2885,7 +2865,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->geometry.trans != VIR_DOMAIN_DISK_TRANS_DEFAULT &&
disk->bus != VIR_DOMAIN_DISK_BUS_IDE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("CHS translation mode can only be set for 'ide' bus not '%s'"),
+ _("CHS translation mode can only be set for 'ide' bus not '%1$s'"),
virDomainDiskBusTypeToString(disk->bus));
return -1;
}
@@ -2893,7 +2873,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->serial && disk->bus == VIR_DOMAIN_DISK_BUS_SD) {
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Serial property not supported for drive bus '%s'"),
+ _("Serial property not supported for drive bus '%1$s'"),
virDomainDiskBusTypeToString(disk->bus));
return -1;
}
@@ -2902,7 +2882,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
(disk->bus == VIR_DOMAIN_DISK_BUS_VIRTIO ||
disk->bus == VIR_DOMAIN_DISK_BUS_SD)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("disk type of '%s' does not support ejectable media"),
+ _("disk type of '%1$s' does not support ejectable media"),
disk->dst);
return -1;
}
@@ -2910,7 +2890,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->copy_on_read == VIR_TRISTATE_SWITCH_ON) {
if (disk->src->readonly) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("copy_on_read is not compatible with read-only disk '%s'"),
+ _("copy_on_read is not compatible with read-only disk '%1$s'"),
disk->dst);
return -1;
}
@@ -2918,7 +2898,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->device == VIR_DOMAIN_DISK_DEVICE_CDROM ||
disk->device == VIR_DOMAIN_DISK_DEVICE_FLOPPY) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("copy_on_read is not supported with removable disk '%s'"),
+ _("copy_on_read is not supported with removable disk '%1$s'"),
disk->dst);
return -1;
}
@@ -2972,7 +2952,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->bus != VIR_DOMAIN_DISK_BUS_VIRTIO &&
disk->bus != VIR_DOMAIN_DISK_BUS_SCSI) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("disk device='lun' is not supported for bus='%s'"),
+ _("disk device='lun' is not supported for bus='%1$s'"),
virDomainDiskBusTypeToString(disk->bus));
return -1;
}
@@ -2988,7 +2968,7 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk,
if (disk->copy_on_read == VIR_TRISTATE_SWITCH_ON) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("copy_on_read is not compatible with 'lun' disk '%s'"),
+ _("copy_on_read is not compatible with 'lun' disk '%1$s'"),
disk->dst);
return -1;
}
@@ -3197,7 +3177,7 @@ qemuValidateDomainDeviceDefDiskBlkdeviotune(const virDomainDiskDef *disk,
if (!virDomainBlockIoTuneInfoEqual(&d->blkdeviotune,
&disk->blkdeviotune)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("different iotunes for disks %s and %s"),
+ _("different iotunes for disks %1$s and %2$s"),
disk->dst, d->dst);
return -1;
}
@@ -3218,8 +3198,8 @@ qemuValidateDomainDeviceDefDiskBlkdeviotune(const virDomainDiskDef *disk,
disk->blkdeviotune.write_iops_sec_max > QEMU_BLOCK_IOTUNE_MAX ||
disk->blkdeviotune.size_iops_sec > QEMU_BLOCK_IOTUNE_MAX) {
virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED,
- _("block I/O throttle limit must "
- "be no more than %llu using QEMU"), QEMU_BLOCK_IOTUNE_MAX);
+ _("block I/O throttle limit must be no more than %1$llu using QEMU"),
+ QEMU_BLOCK_IOTUNE_MAX);
return -1;
}
@@ -3240,26 +3220,26 @@ qemuValidateDomainDeviceDefDiskTransient(const virDomainDiskDef *disk,
if (virStorageSourceIsEmpty(disk->src)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("transient disk '%s' must not be empty"), disk->dst);
+ _("transient disk '%1$s' must not be empty"), disk->dst);
return -1;
}
if (disk->src->readonly) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("transient disk '%s' must not be read-only"), disk->dst);
+ _("transient disk '%1$s' must not be read-only"), disk->dst);
return -1;
}
if (actualType != VIR_STORAGE_TYPE_FILE) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("transient disk supported only with 'file' type (%s)"),
+ _("transient disk supported only with 'file' type (%1$s)"),
disk->dst);
return -1;
}
if (disk->device != VIR_DOMAIN_DISK_DEVICE_DISK) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("transient disk supported only with 'disk' device (%s)"),
+ _("transient disk supported only with 'disk' device (%1$s)"),
disk->dst);
return -1;
}
@@ -3289,7 +3269,7 @@ qemuValidateDomainDeviceDefDiskTransient(const virDomainDiskDef *disk,
case VIR_DOMAIN_DISK_BUS_LAST:
default:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("disk bus '%s' doesn't support transiend disk backing image sharing"),
+ _("disk bus '%1$s' doesn't support transiend disk backing image sharing"),
virDomainDiskBusTypeToString(disk->bus));
return -1;
}
@@ -3321,27 +3301,27 @@ qemuValidateDomainDeviceDefDisk(const virDomainDiskDef *disk,
if (disk->src->shared && !disk->src->readonly &&
!qemuBlockStorageSourceSupportsConcurrentAccess(disk->src)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("shared access for disk '%s' requires use of "
- "supported storage format"), disk->dst);
+ _("shared access for disk '%1$s' requires use of supported storage format"),
+ disk->dst);
return -1;
}
if (driverName && STRNEQ(driverName, "qemu")) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("unsupported driver name '%s' for disk '%s'"),
+ _("unsupported driver name '%1$s' for disk '%2$s'"),
driverName, disk->dst);
return -1;
}
if (virDiskNameParse(disk->dst, &idx, &partition) < 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("invalid disk target '%s'"), disk->dst);
+ _("invalid disk target '%1$s'"), disk->dst);
return -1;
}
if (partition != 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("invalid disk target '%s', partitions can't appear in disk targets"),
+ _("invalid disk target '%1$s', partitions can't appear in disk targets"),
disk->dst);
return -1;
}
@@ -3429,7 +3409,7 @@ qemuValidateCheckSCSIControllerModel(virQEMUCaps *qemuCaps,
case VIR_DOMAIN_CONTROLLER_MODEL_SCSI_AUTO:
case VIR_DOMAIN_CONTROLLER_MODEL_SCSI_BUSLOGIC:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Unsupported controller model: %s"),
+ _("Unsupported controller model: %1$s"),
virDomainControllerModelSCSITypeToString(model));
return false;
case VIR_DOMAIN_CONTROLLER_MODEL_SCSI_NCR53C90:
@@ -3456,7 +3436,7 @@ qemuValidateCheckSCSIControllerModel(virQEMUCaps *qemuCaps,
case VIR_DOMAIN_CONTROLLER_MODEL_SCSI_DEFAULT:
case VIR_DOMAIN_CONTROLLER_MODEL_SCSI_LAST:
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Unexpected SCSI controller model %d"),
+ _("Unexpected SCSI controller model %1$d"),
model);
return false;
}
@@ -3539,7 +3519,7 @@ qemuValidateCheckSCSIControllerIOThreads(const virDomainControllerDef *controlle
/* Can we find the controller iothread in the iothreadid list? */
if (!virDomainIOThreadIDFind(def, controller->iothread)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("controller iothread '%u' not defined in iothreadid"),
+ _("controller iothread '%1$u' not defined in iothreadid"),
controller->iothread);
return false;
}
@@ -3676,18 +3656,15 @@ qemuValidateDomainDeviceDefControllerAttributes(const virDomainControllerDef *co
#define virReportControllerMissingOption(cont, model, modelName, option) \
virReportError(VIR_ERR_INTERNAL_ERROR, \
- _("Required option '%s' is not set for PCI controller " \
- "with index '%d', model '%s' and modelName '%s'"), \
+ _("Required option '%1$s' is not set for PCI controller with index '%2$d', model '%3$s' and modelName '%4$s'"), \
(option), (cont->idx), (model), (modelName));
#define virReportControllerInvalidOption(cont, model, modelName, option) \
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, \
- _("Option '%s' is not valid for PCI controller " \
- "with index '%d', model '%s' and modelName '%s'"), \
+ _("Option '%1$s' is not valid for PCI controller with index '%2$d', model '%3$s' and modelName '%4$s'"), \
(option), (cont->idx), (model), (modelName));
#define virReportControllerInvalidValue(cont, model, modelName, option) \
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, \
- _("Option '%s' has invalid value for PCI controller " \
- "with index '%d', model '%s' and modelName '%s'"), \
+ _("Option '%1$s' has invalid value for PCI controller with index '%2$d', model '%3$s' and modelName '%4$s'"), \
(option), (cont->idx), (model), (modelName));
@@ -3851,7 +3828,7 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_TO_PCI_BRIDGE:
if (cont->idx == 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Index for '%s' controllers must be > 0"),
+ _("Index for '%1$s' controllers must be > 0"),
model);
return -1;
}
@@ -3870,7 +3847,7 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
* the index must be zero */
if (cont->idx != 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Index for '%s' controllers must be 0"),
+ _("Index for '%1$s' controllers must be 0"),
model);
return -1;
}
@@ -3930,8 +3907,8 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
if (pciopts->pcihole64 || pciopts->pcihole64size != 0) {
if (!qemuDomainIsI440FX(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Setting the 64-bit PCI hole size is not "
- "supported for machine '%s'"), def->os.machine);
+ _("Setting the 64-bit PCI hole size is not supported for machine '%1$s'"),
+ def->os.machine);
return -1;
}
}
@@ -3941,8 +3918,8 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
if (pciopts->pcihole64 || pciopts->pcihole64size != 0) {
if (!qemuDomainIsQ35(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Setting the 64-bit PCI hole size is not "
- "supported for machine '%s'"), def->os.machine);
+ _("Setting the 64-bit PCI hole size is not supported for machine '%1$s'"),
+ def->os.machine);
return -1;
}
}
@@ -4121,7 +4098,7 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_PIIX4_ACPI_ROOT_PCI_HOTPLUG)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("setting the '%s' property on a '%s' device is not supported by this QEMU binary"),
+ _("setting the '%1$s' property on a '%2$s' device is not supported by this QEMU binary"),
"hotplug", "pci-root");
return -1;
}
@@ -4130,7 +4107,7 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_PCIE_ROOT_PORT_HOTPLUG)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("setting the '%s' property on a '%s' device is not supported by this QEMU binary"),
+ _("setting the '%1$s' property on a '%2$s' device is not supported by this QEMU binary"),
"hotplug", modelName);
return -1;
}
@@ -4156,13 +4133,13 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
/* QEMU device availability */
if (cap < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Unknown QEMU device for '%s' controller"),
+ _("Unknown QEMU device for '%1$s' controller"),
modelName);
return -1;
}
if (cap > 0 && !virQEMUCapsGet(qemuCaps, cap)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The '%s' device is not supported by this QEMU binary"),
+ _("The '%1$s' device is not supported by this QEMU binary"),
modelName);
return -1;
}
@@ -4174,7 +4151,7 @@ qemuValidateDomainDeviceDefControllerPCI(const virDomainControllerDef *cont,
pciopts->numaNode != -1 &&
!virQEMUCapsGet(qemuCaps, QEMU_CAPS_SPAPR_PCI_HOST_BRIDGE_NUMA_NODE)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Option '%s' is not supported by '%s' device with this QEMU binary"),
+ _("Option '%1$s' is not supported by '%2$s' device with this QEMU binary"),
"numaNode", modelName);
return -1;
}
@@ -4302,7 +4279,7 @@ qemuValidateDomainDeviceDefVNCGraphics(const virDomainGraphicsDef *graphics,
if (graphics->data.vnc.auth.passwd &&
strlen(graphics->data.vnc.auth.passwd) > 8) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("VNC password is %zu characters long, only 8 permitted"),
+ _("VNC password is %1$zu characters long, only 8 permitted"),
strlen(graphics->data.vnc.auth.passwd));
return -1;
}
@@ -4343,7 +4320,7 @@ qemuValidateDomainDeviceDefGraphics(const virDomainGraphicsDef *graphics,
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(graphicsCaps.type, graphics->type)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s graphics are not supported with this QEMU"),
+ _("%1$s graphics are not supported with this QEMU"),
virDomainGraphicsTypeToString(graphics->type));
return -1;
}
@@ -4609,21 +4586,21 @@ qemuValidateDomainDeviceDefCrypto(virDomainCryptoDef *crypto,
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(cryptoCaps.model, crypto->model)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("crypto model %s is not supported"),
+ _("crypto model %1$s is not supported"),
virDomainCryptoModelTypeToString(crypto->model));
return -1;
}
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(cryptoCaps.type, crypto->type)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("crypto type %s is not supported"),
+ _("crypto type %1$s is not supported"),
virDomainCryptoTypeTypeToString(crypto->type));
return -1;
}
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(cryptoCaps.backendModel, crypto->backend)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("crypto backend %s is not supported"),
+ _("crypto backend %1$s is not supported"),
virDomainCryptoBackendTypeToString(crypto->backend));
return -1;
}
@@ -4681,7 +4658,7 @@ qemuValidateDomainDeviceDefSound(virDomainSoundDef *sound,
case VIR_DOMAIN_SOUND_MODEL_ICH7:
case VIR_DOMAIN_SOUND_MODEL_LAST:
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("sound card model '%s' is not supported by qemu"),
+ _("sound card model '%1$s' is not supported by qemu"),
virDomainSoundModelTypeToString(sound->model));
return -1;
}
@@ -4697,7 +4674,7 @@ qemuValidateDomainDeviceDefSound(virDomainSoundDef *sound,
if (flags == -1 || !virQEMUCapsGet(qemuCaps, flags)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s not supported in this QEMU binary"), stype);
+ _("%1$s not supported in this QEMU binary"), stype);
return -1;
}
}
@@ -4735,7 +4712,7 @@ qemuValidateDomainDeviceDefTPM(virDomainTPMDef *tpm,
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(tpmCaps.backendVersion, version)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("TPM version '%s' is not supported"),
+ _("TPM version '%1$s' is not supported"),
virDomainTPMVersionTypeToString(version));
return -1;
}
@@ -4745,7 +4722,7 @@ qemuValidateDomainDeviceDefTPM(virDomainTPMDef *tpm,
/* TPM 1.2 + CRB do not work */
if (tpm->model == VIR_DOMAIN_TPM_MODEL_CRB) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Unsupported interface '%s' for TPM 1.2"),
+ _("Unsupported interface '%1$s' for TPM 1.2"),
virDomainTPMModelTypeToString(tpm->model));
return -1;
}
@@ -4771,8 +4748,7 @@ qemuValidateDomainDeviceDefTPM(virDomainTPMDef *tpm,
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(tpmCaps.backendModel, tpm->type)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The QEMU executable %s does not support TPM "
- "backend type %s"),
+ _("The QEMU executable %1$s does not support TPM backend type %2$s"),
def->emulator,
virDomainTPMBackendTypeToString(tpm->type));
return -1;
@@ -4782,16 +4758,14 @@ qemuValidateDomainDeviceDefTPM(virDomainTPMDef *tpm,
tpm->model == VIR_DOMAIN_TPM_MODEL_SPAPR_PROXY &&
tpm->type != VIR_DOMAIN_TPM_TYPE_PASSTHROUGH) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("TPM Proxy model %s requires "
- "'Passthrough' backend"),
+ _("TPM Proxy model %1$s requires 'Passthrough' backend"),
virDomainTPMModelTypeToString(tpm->model));
return -1;
}
if (!VIR_DOMAIN_CAPS_ENUM_IS_SET(tpmCaps.model, tpm->model)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("The QEMU executable %s does not support TPM "
- "model %s"),
+ _("The QEMU executable %1$s does not support TPM model %2$s"),
def->emulator,
virDomainTPMModelTypeToString(tpm->model));
return -1;
@@ -4813,7 +4787,7 @@ qemuValidateDomainDeviceDefInput(const virDomainInputDef *input,
if (input->bus == VIR_DOMAIN_INPUT_BUS_PS2 && !ARCH_IS_X86(def->os.arch) &&
!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_I8042)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s is not supported by this QEMU binary"),
+ _("%1$s is not supported by this QEMU binary"),
virDomainInputBusTypeToString(input->bus));
return -1;
}
@@ -4835,8 +4809,7 @@ qemuValidateDomainDeviceDefInput(const virDomainInputDef *input,
case VIR_DOMAIN_INPUT_MODEL_VIRTIO_TRANSITIONAL:
case VIR_DOMAIN_INPUT_MODEL_VIRTIO_NON_TRANSITIONAL:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("virtio (non-)transitional models are not "
- "supported for input type=%s"),
+ _("virtio (non-)transitional models are not supported for input type=%1$s"),
virDomainInputTypeToString(input->type));
return -1;
case VIR_DOMAIN_INPUT_MODEL_VIRTIO:
@@ -4886,7 +4859,7 @@ qemuValidateDomainDeviceDefInput(const virDomainInputDef *input,
(input->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW &&
!virQEMUCapsGet(qemuCaps, ccwCap))) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("%s is not supported by this QEMU binary"),
+ _("%1$s is not supported by this QEMU binary"),
baseName);
return -1;
}
@@ -4908,7 +4881,7 @@ qemuValidateDomainDeviceDefMemballoon(const virDomainMemballoonDef *memballoon,
memballoon->model != VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO_TRANSITIONAL &&
memballoon->model != VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO_NON_TRANSITIONAL) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("Memory balloon device type '%s' is not supported by this version of qemu"),
+ _("Memory balloon device type '%1$s' is not supported by this version of qemu"),
virDomainMemballoonModelTypeToString(memballoon->model));
return -1;
}
@@ -4940,15 +4913,13 @@ qemuValidateDomainDeviceDefIOMMU(const virDomainIOMMUDef *iommu,
case VIR_DOMAIN_IOMMU_MODEL_INTEL:
if (!qemuDomainIsQ35(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' is only supported with "
- "Q35 machines"),
+ _("IOMMU device: '%1$s' is only supported with Q35 machines"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_INTEL_IOMMU)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' is not supported with "
- "this QEMU binary"),
+ _("IOMMU device: '%1$s' is not supported with this QEMU binary"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
@@ -4957,15 +4928,13 @@ qemuValidateDomainDeviceDefIOMMU(const virDomainIOMMUDef *iommu,
case VIR_DOMAIN_IOMMU_MODEL_SMMUV3:
if (!qemuDomainIsARMVirt(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' is only supported with "
- "ARM Virt machines"),
+ _("IOMMU device: '%1$s' is only supported with ARM Virt machines"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_MACHINE_VIRT_IOMMU)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' is not supported with "
- "this QEMU binary"),
+ _("IOMMU device: '%1$s' is not supported with this QEMU binary"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
@@ -4975,29 +4944,27 @@ qemuValidateDomainDeviceDefIOMMU(const virDomainIOMMUDef *iommu,
if (!qemuDomainIsARMVirt(def) &&
!qemuDomainIsQ35(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' is only supported with "
- "Q35 and ARM Virt machines"),
+ _("IOMMU device: '%1$s' is only supported with Q35 and ARM Virt machines"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_IOMMU_PCI) ||
!virQEMUCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_IOMMU_BOOT_BYPASS)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' is not supported with "
- "this QEMU binary"),
+ _("IOMMU device: '%1$s' is not supported with this QEMU binary"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
if (def->features[VIR_DOMAIN_FEATURE_ACPI] != VIR_TRISTATE_SWITCH_ON) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' requires ACPI"),
+ _("IOMMU device: '%1$s' requires ACPI"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
if (iommu->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE &&
iommu->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("IOMMU device: '%s' needs a PCI address"),
+ _("IOMMU device: '%1$s' needs a PCI address"),
virDomainIOMMUModelTypeToString(iommu->model));
return -1;
}
@@ -5093,7 +5060,7 @@ qemuValidateDomainDeviceDefHub(virDomainHubDef *hub,
{
if (hub->type != VIR_DOMAIN_HUB_TYPE_USB) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("hub type %s not supported"),
+ _("hub type %1$s not supported"),
virDomainHubTypeToString(hub->type));
return -1;
}
@@ -5175,7 +5142,7 @@ qemuValidateDomainDeviceDefMemory(virDomainMemoryDef *mem,
while ((node = virBitmapNextSetBit(mem->sourceNodes, node)) >= 0) {
if (mem->size > sgxCaps->sgxSections[node].size) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("sgx epc size %lld on host node %zd is less than requested size %lld"),
+ _("sgx epc size %1$lld on host node %2$zd is less than requested size %3$lld"),
sgxCaps->sgxSections[node].size, node, mem->size);
return -1;
}
@@ -5185,7 +5152,7 @@ qemuValidateDomainDeviceDefMemory(virDomainMemoryDef *mem,
* specify it. */
if (mem->size > sgxCaps->sgxSections[0].size) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("sgx epc size %lld on host node %d is less than requested size %lld"),
+ _("sgx epc size %1$lld on host node %2$d is less than requested size %3$lld"),
sgxCaps->sgxSections[0].size, 0, mem->size);
return -1;
}
@@ -5219,8 +5186,7 @@ qemuValidateDomainDeviceDefShmem(virDomainShmemDef *shmem,
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM_PLAIN:
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_IVSHMEM_PLAIN)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("shmem model '%s' is not supported "
- "by this QEMU binary"),
+ _("shmem model '%1$s' is not supported by this QEMU binary"),
virDomainShmemModelTypeToString(shmem->model));
return -1;
}
@@ -5229,8 +5195,7 @@ qemuValidateDomainDeviceDefShmem(virDomainShmemDef *shmem,
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM_DOORBELL:
if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_IVSHMEM_DOORBELL)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("shmem model '%s' is not supported "
- "by this QEMU binary"),
+ _("shmem model '%1$s' is not supported by this QEMU binary"),
virDomainShmemModelTypeToString(shmem->model));
return -1;
}
--
2.39.2
More information about the libvir-list
mailing list