[Libvirt-ci] Build failed in Jenkins: libvirt-master-check » libvirt-freebsd-11 #1157
ci at centos.org
ci at centos.org
Fri Jun 8 12:32:49 UTC 2018
See <https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/1157/display/redirect>
------------------------------------------
[...truncated 26.25 KB...]
PASS: networkxml2xmlupdatetest
PASS: networkxml2xmltest
PASS: networkxml2conftest
SKIP: networkxml2firewalltest
PASS: nwfilterxml2xmltest
PASS: storagevolxml2argvtest
PASS: virstorageutiltest
PASS: nsstest
PASS: nssguesttest
PASS: storagevolxml2xmltest
PASS: storagepoolxml2xmltest
PASS: nodedevxml2xmltest
PASS: interfacexml2xmltest
PASS: metadatatest
PASS: secretxml2xmltest
PASS: genericxml2xmltest
PASS: eventtest
PASS: virdrivermoduletest
PASS: objecteventtest
PASS: virmacmaptest
PASS: cputest
PASS: libvirtd-fail
PASS: libvirtd-pool
PASS: virsh-cpuset
PASS: virsh-int-overflow
PASS: virsh-define-dev-segfault
SKIP: virsh-optparse
PASS: virsh-read-bufsiz
PASS: virsh-read-non-seekable
PASS: virsh-self-test
PASS: virsh-schedinfo
PASS: virt-admin-self-test
PASS: virsh-start
PASS: virsh-undefine
PASS: virsh-vcpupin
PASS: virsh-uriprecedence
PASS: virshtest
============================================================================
Testsuite summary for libvirt 4.5.0
============================================================================
# TOTAL: 108
# PASS: 92
# SKIP: 14
# XFAIL: 0
# FAIL: 2
# XPASS: 0
# ERROR: 0
============================================================================
See tests/test-suite.log
Please report to libvir-list at redhat.com
============================================================================
gmake[3]: *** [Makefile:5674: test-suite.log] Error 1
gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/ws/build/tests'>
gmake[2]: *** [Makefile:5782: check-TESTS] Error 2
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/ws/build/tests'>
gmake[1]: *** [Makefile:6770: check-am] Error 2
gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/ws/build/tests'>
gmake: *** [Makefile:2104: check-recursive] Error 1
+ cat tests/test-suite.log
=========================================
libvirt 4.5.0: tests/test-suite.log
=========================================
# TOTAL: 108
# PASS: 92
# SKIP: 14
# XFAIL: 0
# FAIL: 2
# XPASS: 0
# ERROR: 0
.. contents:: :depth: 2
SKIP: virhostcputest
====================
SKIP virhostcputest (exit status: 77)
SKIP: shunloadtest
==================
SKIP shunloadtest (exit status: 77)
SKIP: vircgrouptest
===================
SKIP vircgrouptest (exit status: 77)
SKIP: virpcitest
================
SKIP virpcitest (exit status: 77)
SKIP: virfirewalltest
=====================
SKIP virfirewalltest (exit status: 77)
SKIP: virportallocatortest
==========================
SKIP virportallocatortest (exit status: 77)
SKIP: virkmodtest
=================
SKIP virkmodtest (exit status: 77)
SKIP: virhostdevtest
====================
SKIP virhostdevtest (exit status: 77)
SKIP: virnetdevtest
===================
SKIP virnetdevtest (exit status: 77)
FAIL: virnetsockettest
======================
TEST: virnetsockettest
1) Socket TCP/IPv4 Accept ... FAILED
2) Socket TCP/IPv6 Accept ... libvirt: XML-RPC error : End of file while reading data: Input/output error
OK
3) Socket TCP/IPv4+IPv6 Accept ... libvirt: XML-RPC error : End of file while reading data: Input/output error
OK
4) Socket TCP/IPv4+IPv6 Accept ... libvirt: XML-RPC error : End of file while reading data: Input/output error
OK
5) Socket UNIX Accept ... libvirt: XML-RPC error : Cannot write data: Broken pipe
OK
6) Socket UNIX Addrs ... OK
7) Socket External Command /dev/zero ... OK
8) Socket External Command /dev/does-not-exist ... libvirt: XML-RPC error : End of file while reading data: cat: /dev/does-not-exist: No such file or directory: Input/output error
OK
9) SSH test 1 ... OK
10) SSH test 2 ... OK
11) SSH test 3 ... OK
12) SSH test 4 ... libvirt: XML-RPC error : End of file while reading data: Cannot connect to host nosuchhost: Input/output error
OK
13) SSH test 5 ... libvirt: XML-RPC error : End of file while reading data: : Input/output error
OK
14) SSH test 6 ... OK
15) SSH test 7 ... OK
FAIL virnetsockettest (exit status: 1)
SKIP: virnettlscontexttest
==========================
SKIP virnettlscontexttest (exit status: 77)
SKIP: virnettlssessiontest
==========================
SKIP virnettlssessiontest (exit status: 77)
SKIP: virsystemdtest
====================
SKIP virsystemdtest (exit status: 77)
FAIL: bhyvexml2argvtest
=======================
TEST: bhyvexml2argvtest
1) BHYVE XML-2-ARGV base ... OK
2) BHYVE XML-2-ARGV wired ... OK
3) BHYVE XML-2-ARGV acpiapic ... OK
4) BHYVE XML-2-ARGV disk-cdrom ... OK
5) BHYVE XML-2-ARGV disk-virtio ... OK
6) BHYVE XML-2-ARGV macaddr ... OK
7) BHYVE XML-2-ARGV serial ... OK
8) BHYVE XML-2-ARGV console ... OK
9) BHYVE XML-2-ARGV grub-defaults ... OK
10) BHYVE XML-2-ARGV grub-bootorder ... OK
11) BHYVE XML-2-ARGV grub-bootorder2 ... OK
12) BHYVE XML-2-ARGV bhyveload-bootorder ... OK
13) BHYVE XML-2-ARGV bhyveload-bootorder1 ... OK
14) BHYVE XML-2-ARGV bhyveload-bootorder2 ... Got expected error: unsupported configuration: Cannot find boot device of requested type cdrom
OK
15) BHYVE XML-2-ARGV bhyveload-bootorder3 ... OK
16) BHYVE XML-2-ARGV bhyveload-explicitargs ... OK
17) BHYVE XML-2-ARGV bhyveload-bootorder4 ... Got expected error: unsupported configuration: Only one boot device is supported
OK
18) BHYVE XML-2-ARGV bhyveload-bootorder5 ... libvirt: Domain Config error : unsupported configuration: per-device boot elements cannot be used together with os/boot elements
OK
19) BHYVE XML-2-ARGV custom-loader ... OK
20) BHYVE XML-2-ARGV disk-cdrom-grub ... OK
21) BHYVE XML-2-ARGV serial-grub ... OK
22) BHYVE XML-2-ARGV localtime ... OK
23) BHYVE XML-2-ARGV net-e1000 ... OK
24) BHYVE XML-2-ARGV uefi ... OK
25) BHYVE XML-2-ARGV vnc ... OK
26) BHYVE XML-2-ARGV vnc-vgaconf-on ... OK
27) BHYVE XML-2-ARGV vnc-vgaconf-off ... OK
28) BHYVE XML-2-ARGV vnc-vgaconf-io ... libvirt: Domain Config error : unsupported configuration: unknown vgaconf value 'io'
OK
29) BHYVE XML-2-ARGV vnc-autoport ... OK
30) BHYVE XML-2-ARGV cputopology ... I/O warning : failed to load external entity "/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/ws/tests/bhyvexml2argvdata/bhyvexml2argv-cputopology.xml">
libvirt: Domain Config error : XML error: failed to parse xml document
FAILED
31) BHYVE XML-2-ARGV cputopology-nvcpu-mismatch ... I/O warning : failed to load external entity "/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/ws/tests/bhyvexml2argvdata/bhyvexml2argv-cputopology-nvcpu-mismatch.xml">
Got expected error: XML error: failed to parse xml document
OK
32) BHYVE XML-2-ARGV addr-single-sata-disk ... OK
33) BHYVE XML-2-ARGV addr-multiple-sata-disks ... OK
34) BHYVE XML-2-ARGV addr-more-than-32-sata-disks ... OK
35) BHYVE XML-2-ARGV addr-single-virtio-disk ... OK
36) BHYVE XML-2-ARGV addr-multiple-virtio-disks ... OK
37) BHYVE XML-2-ARGV addr-no32devs-single-sata-disk ... OK
38) BHYVE XML-2-ARGV addr-no32devs-multiple-sata-disks ... OK
39) BHYVE XML-2-ARGV addr-no32devs-more-than-32-sata-disks ... Got expected error: internal error: No more available PCI slots
OK
40) BHYVE XML-2-ARGV input-xhci-tablet ... OK
41) BHYVE XML-2-ARGV xhci-multiple-controllers ... Got expected error: unsupported configuration: only single USB controller is supported
OK
42) BHYVE XML-2-ARGV xhci-no-devs ... Got expected error: unsupported configuration: only single input device is supported
OK
43) BHYVE XML-2-ARGV xhci-multiple-devs ... Got expected error: unsupported configuration: only single input device is supported
OK
44) BHYVE XML-2-ARGV input-xhci-tablet ... OK
45) BHYVE XML-2-ARGV serial-grub-nocons ... OK
46) BHYVE XML-2-ARGV net-e1000 ... Got expected error: unsupported configuration: NIC model 'e1000' is not supported by given bhyve binary
OK
47) BHYVE XML-2-ARGV uefi ... Got expected error: unsupported configuration: Installed bhyve binary does not support UEFI loader
OK
48) BHYVE XML-2-ARGV vnc ... Got expected error: unsupported configuration: Installed bhyve binary does not support UEFI loader
OK
49) BHYVE XML-2-ARGV cputopology ... I/O warning : failed to load external entity "/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-11/ws/tests/bhyvexml2argvdata/bhyvexml2argv-cputopology.xml">
Got expected error: XML error: failed to parse xml document
OK
FAIL bhyvexml2argvtest (exit status: 1)
SKIP: networkxml2firewalltest
=============================
SKIP networkxml2firewalltest (exit status: 77)
SKIP: virsh-optparse
====================
../../tests/virsh-optparse: skipping test:
This test is very expensive, so it is disabled by default.
To run it anyway, rerun: make check VIR_TEST_EXPENSIVE=1
SKIP virsh-optparse (exit status: 77)
+ exit 1
Build step 'Execute shell' marked build as failure
More information about the Libvirt-ci
mailing list