[Libvirt-cim] [PATCH 5 of 7] libcmpiutil: Remove trailing whitespaces
Eduardo Lima (Etrunko)
eblima at linux.vnet.ibm.com
Mon May 16 17:47:52 UTC 2011
# HG changeset patch
# User Eduardo Lima (Etrunko) <eblima at br.ibm.com>
# Date 1305297352 10800
# Node ID 1177a2ffc8c7333a8e80c7ce743f0f10ef7da99c
# Parent c24bb1e158f5fee7e5e51e42fa02790f58ce2834
libcmpiutil: Remove trailing whitespaces
Signed-off-by: Eduardo Lima (Etrunko) <eblima at br.ibm.com>
diff --git a/Makefile.am b/Makefile.am
--- a/Makefile.am
+++ b/Makefile.am
@@ -39,7 +39,7 @@
BUILT_SOURCES = eo_util_lexer.c eo_util_parser.c eo_util_parser.h
endif
-lib_LTLIBRARIES = $(EOPARSER) libcmpiutil.la
+lib_LTLIBRARIES = $(EOPARSER) libcmpiutil.la
docs:
if found_doxygen
diff --git a/acinclude.m4 b/acinclude.m4
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -59,7 +59,7 @@
if test "$have_CMPI" == "yes"; then
dnl Found it
AC_MSG_RESULT(yes)
- dnl Save the new -I parameter
+ dnl Save the new -I parameter
CMPI_CPP_FLAGS="$CPPFLAGS"
break
else
@@ -67,8 +67,8 @@
fi
CPPFLAGS=$_cppflags
done
- fi
- CPPFLAGS="$CMPI_CPP_FLAGS"
+ fi
+ CPPFLAGS="$CMPI_CPP_FLAGS"
if test "$have_CMPI" == "no"; then
AC_MSG_ERROR(Cannot find CMPI header files.)
fi
@@ -100,7 +100,7 @@
#
AC_DEFUN([CHECK_IND_VOID], [
AH_TEMPLATE([CMPI_EI_VOID],
- [Defined if return type of EnableIndications
+ [Defined if return type of EnableIndications
should be void])
AC_MSG_CHECKING([return type for indications])
CFLAGS_TMP=$CFLAGS
@@ -110,7 +110,7 @@
static void ei(CMPIIndicationMI *mi, const CMPIContext *c) {
return;
}
- ],[
+ ],[
struct _CMPIIndicationMIFT ft;
ft.enableIndications = ei;
return 0;
diff --git a/args_util.c b/args_util.c
--- a/args_util.c
+++ b/args_util.c
@@ -37,10 +37,10 @@
CMPIData data;
CMPIStatus s;
const char *value;
-
+
data = CMGetKey(reference, key, &s);
- if ((s.rc != CMPI_RC_OK) ||
- CMIsNullValue(data) ||
+ if ((s.rc != CMPI_RC_OK) ||
+ CMIsNullValue(data) ||
CMIsNullObject(data.value.string))
return CMPI_RC_ERR_FAILED;
@@ -96,7 +96,7 @@
if ((s.rc != CMPI_RC_OK) || (CMIsNullValue(argdata)))
return CMPI_RC_ERR_INVALID_PARAMETER;
- if ((argdata.type != CMPI_string) ||
+ if ((argdata.type != CMPI_string) ||
CMIsNullObject(argdata.value.string))
return CMPI_RC_ERR_TYPE_MISMATCH;
@@ -150,7 +150,7 @@
{
CMPIData argdata;
CMPIStatus s;
-
+
argdata = CMGetArg(args, name, &s);
if ((s.rc != CMPI_RC_OK) || CMIsNullValue(argdata))
return CMPI_RC_ERR_INVALID_PARAMETER;
@@ -221,7 +221,7 @@
const char *prop_val;
*target = NULL;
-
+
REQUIRE_PROPERTY_DEFINED(inst, prop, value, &s);
if (value.type != CMPI_string)
diff --git a/configure.ac b/configure.ac
--- a/configure.ac
+++ b/configure.ac
@@ -51,7 +51,7 @@
[eoparser=${enableval}],
[eoparser=yes])
-AM_CONDITIONAL([build_eoparser],[test x$eoparser = xyes])
+AM_CONDITIONAL([build_eoparser],[test x$eoparser = xyes])
# Check for pkg-config program
PKG_PROG_PKG_CONFIG
diff --git a/debug_util.c b/debug_util.c
--- a/debug_util.c
+++ b/debug_util.c
@@ -51,7 +51,7 @@
if (log != NULL)
vfprintf(log, fmt, ap);
-
+
va_end(ap);
}
diff --git a/doc/doxygen.conf b/doc/doxygen.conf
--- a/doc/doxygen.conf
+++ b/doc/doxygen.conf
@@ -14,207 +14,207 @@
# Project related configuration options
#---------------------------------------------------------------------------
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.
PROJECT_NAME = libcmpiutil
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
# if some version control system is used.
PROJECT_NUMBER = 1
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.
OUTPUT_DIRECTORY = doc
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
# otherwise cause performance problems for the file system.
CREATE_SUBDIRS = NO
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
-# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
-# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
# Swedish, and Ukrainian.
OUTPUT_LANGUAGE = English
-# This tag can be used to specify the encoding used in the generated output.
-# The encoding is not always determined by the language that is chosen,
-# but also whether or not the output is meant for Windows or non-Windows users.
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
-# forces the Windows encoding (this is the default for the Windows binary),
-# whereas setting the tag to NO uses a Unix-style encoding (the default for
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
# all platforms other than Windows).
USE_WINDOWS_ENCODING = NO
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
# Set to NO to disable this.
BRIEF_MEMBER_DESC = YES
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
# "represents" "a" "an" "the"
-ABBREVIATE_BRIEF =
+ABBREVIATE_BRIEF =
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
# description.
ALWAYS_DETAILED_SEC = NO
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
INLINE_INHERITED_MEMB = NO
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = YES
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
# path to strip.
-STRIP_FROM_PATH =
+STRIP_FROM_PATH =
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag.
-STRIP_FROM_INC_PATH =
+STRIP_FROM_INC_PATH =
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
# doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like the Qt-style comments (thus requiring an
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
# explicit @brief command for a brief description.
JAVADOC_AUTOBRIEF = NO
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.
MULTILINE_CPP_IS_BRIEF = NO
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member
+# If set to NO, the detailed description appears after the member
# documentation.
DETAILS_AT_TOP = NO
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
# re-implements.
INHERIT_DOCS = YES
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
# be part of the file/class/namespace that contains it.
SEPARATE_MEMBER_PAGES = NO
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.
-ALIASES =
+ALIASES =
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = YES
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for Java.
-# For instance, namespaces will be presented as packages, qualified scopes
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
# will look different, etc.
OPTIMIZE_OUTPUT_JAVA = NO
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
-# include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also make the inheritance and collaboration
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
+# include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = NO
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
# the \nosubgrouping command.
SUBGROUPING = YES
@@ -223,327 +223,327 @@
# Build related configuration options
#---------------------------------------------------------------------------
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = NO
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation.
EXTRACT_PRIVATE = NO
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation.
EXTRACT_STATIC = NO
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
# If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = NO
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = NO
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
# documentation.
HIDE_FRIEND_COMPOUNDS = NO
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block.
HIDE_IN_BODY_DOCS = NO
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
# and Mac users are advised to set this option to NO.
CASE_SENSE_NAMES = YES
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
# of that file.
SHOW_INCLUDE_FILES = YES
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members.
INLINE_INFO = YES
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
# declaration order.
SORT_MEMBER_DOCS = YES
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
# declaration order.
SORT_BRIEF_DOCS = NO
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
+# Note: This option applies only to the class list, not to the
# alphabetical list.
SORT_BY_SCOPE_NAME = NO
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation.
GENERATE_TODOLIST = YES
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
# commands in the documentation.
GENERATE_TESTLIST = YES
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation.
GENERATE_BUGLIST = YES
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES
-# The ENABLED_SECTIONS tag can be used to enable conditional
+# The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif.
-ENABLED_SECTIONS =
+ENABLED_SECTIONS =
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# in the documentation. The default is NO.
SHOW_DIRECTORIES = NO
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from the
-# version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from the
+# version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples.
-FILE_VERSION_FILTER =
+FILE_VERSION_FILTER =
#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------
-# The QUIET tag can be used to turn on/off the messages that are generated
+# The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = NO
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
WARNINGS = YES
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled.
WARN_IF_UNDOCUMENTED = YES
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES
-# This WARN_NO_PARAMDOC option can be abled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
# documentation.
WARN_NO_PARAMDOC = NO
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
# be obtained via FILE_VERSION_FILTER)
WARN_FORMAT = "$file:$line: $text"
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
# to stderr.
-WARN_LOGFILE =
+WARN_LOGFILE =
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
INPUT = . ./doc/mainpage
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
#FILE_PATTERNS = *.c *.h doc/mainpage
-FILE_PATTERNS =
+FILE_PATTERNS =
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used.
RECURSIVE = NO
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
-EXCLUDE =
+EXCLUDE =
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
# from the input.
EXCLUDE_SYMLINKS = NO
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
-EXCLUDE_PATTERNS =
+EXCLUDE_PATTERNS =
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
# the \include command).
-EXAMPLE_PATH =
+EXAMPLE_PATH =
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
# blank all files are included.
-EXAMPLE_PATTERNS =
+EXAMPLE_PATTERNS =
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = NO
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
# the \image command).
-IMAGE_PATH =
+IMAGE_PATH =
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
# ignored.
-INPUT_FILTER =
+INPUT_FILTER =
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
# is applied to all files.
-FILTER_PATTERNS =
+FILTER_PATTERNS =
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO
@@ -552,32 +552,32 @@
# configuration options related to source browsing
#---------------------------------------------------------------------------
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
# VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = NO
-# Setting the INLINE_SOURCES tag to YES will include the body
+# Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation.
INLINE_SOURCES = NO
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES
-# If the REFERENCED_BY_RELATION tag is set to YES (the default)
-# then for each documented function all documented
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
# functions referencing it will be listed.
REFERENCED_BY_RELATION = YES
-# If the REFERENCES_RELATION tag is set to YES (the default)
-# then for each documented function all documented entities
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
# called/used by that function will be listed.
REFERENCES_RELATION = YES
@@ -589,16 +589,16 @@
REFERENCES_LINK_SOURCE = YES
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
# will need version 4.8.6 or higher.
USE_HTAGS = NO
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES
@@ -607,133 +607,133 @@
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = NO
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 5
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers.
-IGNORE_PREFIX =
+IGNORE_PREFIX =
#---------------------------------------------------------------------------
# configuration options related to the HTML output
#---------------------------------------------------------------------------
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output.
GENERATE_HTML = YES
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = html
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
# standard header.
-HTML_HEADER =
+HTML_HEADER =
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
-HTML_FOOTER =
+HTML_FOOTER =
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased!
-HTML_STYLESHEET =
+HTML_STYLESHEET =
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
# of the generated HTML documentation.
GENERATE_HTMLHELP = NO
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
# written to the html output directory.
-CHM_FILE =
+CHM_FILE =
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp.
-HHC_LOCATION =
+HHC_LOCATION =
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO).
GENERATE_CHI = NO
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file.
BINARY_TOC = NO
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it.
DISABLE_INDEX = NO
-# This tag can be used to set the number of enum values (range [1..20])
+# This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation.
ENUM_VALUES_PER_LINE = 4
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
# probably better off using the HTML help feature.
GENERATE_TREEVIEW = NO
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
TREEVIEW_WIDTH = 250
@@ -742,74 +742,74 @@
# configuration options related to the LaTeX output
#---------------------------------------------------------------------------
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
GENERATE_LATEX = NO
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name.
LATEX_CMD_NAME = latex
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name.
MAKEINDEX_CMD_NAME = makeindex
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_LATEX = NO
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
# executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output.
-EXTRA_PACKAGES =
+EXTRA_PACKAGES =
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing!
-LATEX_HEADER =
+LATEX_HEADER =
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation.
USE_PDFLATEX = NO
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
# in the output.
LATEX_HIDE_INDICES = NO
@@ -818,68 +818,68 @@
# configuration options related to the RTF output
#---------------------------------------------------------------------------
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors.
GENERATE_RTF = NO
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_RTF = NO
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
# Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.
-RTF_STYLESHEET_FILE =
+RTF_STYLESHEET_FILE =
-# Set optional variables used in the generation of an rtf document.
+# Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file.
-RTF_EXTENSIONS_FILE =
+RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# configuration options related to the man page output
#---------------------------------------------------------------------------
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages
GENERATE_MAN = NO
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man
-# The MAN_EXTENSION tag determines the extension that is added to
+# The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO.
MAN_LINKS = NO
@@ -888,33 +888,33 @@
# configuration options related to the XML output
#---------------------------------------------------------------------------
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
# the code including all documentation.
GENERATE_XML = NO
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path.
XML_OUTPUT = xml
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
# syntax of the XML files.
-XML_SCHEMA =
+XML_SCHEMA =
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
# syntax of the XML files.
-XML_DTD =
+XML_DTD =
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
# enabling this will significantly increase the size of the XML output.
XML_PROGRAMLISTING = YES
@@ -923,10 +923,10 @@
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
# and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO
@@ -935,319 +935,319 @@
# configuration options related to the Perl module output
#---------------------------------------------------------------------------
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
# moment.
GENERATE_PERLMOD = NO
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output.
PERLMOD_LATEX = NO
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader. This is useful
-# if you want to understand what is going on. On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same.
PERLMOD_PRETTY = YES
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables.
-PERLMOD_MAKEVAR_PREFIX =
+PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
+# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
# files.
ENABLE_PREPROCESSING = YES
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = NO
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
# the preprocessor.
-INCLUDE_PATH =
+INCLUDE_PATH =
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used.
-INCLUDE_FILE_PATTERNS =
+INCLUDE_FILE_PATTERNS =
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
-PREDEFINED =
+PREDEFINED =
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition.
-EXPAND_AS_DEFINED =
+EXPAND_AS_DEFINED =
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
# the parser if not removed.
SKIP_FUNCTION_MACROS = YES
#---------------------------------------------------------------------------
-# Configuration::additions related to external references
+# Configuration::additions related to external references
#---------------------------------------------------------------------------
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
# does not have to be run to correct the links.
# Note that each tag file must have a unique name
# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
+# If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here.
-TAGFILES =
+TAGFILES =
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.
-GENERATE_TAGFILE =
+GENERATE_TAGFILE =
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
# will be listed.
ALLEXTERNALS = NO
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
# be listed.
EXTERNAL_GROUPS = YES
-# The PERL_PATH should be the absolute path and name of the perl script
+# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl
#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
+# Configuration options related to the dot tool
#---------------------------------------------------------------------------
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a
-# fallback. It is recommended to install and use dot, since it yields more
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
# powerful graphs.
CLASS_DIAGRAMS = YES
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
# or is not a class.
HIDE_UNDOC_RELATIONS = YES
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default)
HAVE_DOT = NO
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
UML_LOOK = NO
-# If set to YES, the inheritance and collaboration graphs will show the
+# If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances.
TEMPLATE_RELATIONS = NO
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
# other documented files.
INCLUDE_GRAPH = YES
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
# indirectly include this file.
INCLUDED_BY_GRAPH = YES
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a call dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
# functions only using the \callgraph command.
CALL_GRAPH = NO
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a caller dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a caller dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
# functions only using the \callergraph command.
CALLER_GRAPH = NO
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
DIRECTORY_GRAPH = YES
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. Possible values are png, jpg, or gif
# If left blank png will be used.
DOT_IMAGE_FORMAT = png
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found in the path.
-DOT_PATH =
+DOT_PATH =
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
# \dotfile command).
-DOTFILE_DIRS =
+DOTFILE_DIRS =
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
# large images.
MAX_DOT_GRAPH_WIDTH = 1024
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
# large images.
MAX_DOT_GRAPH_HEIGHT = 1024
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that a graph may be further truncated if the graph's
-# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that a graph may be further truncated if the graph's
+# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
+# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
# the graph is not depth-constrained.
MAX_DOT_GRAPH_DEPTH = 0
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, which results in a white background.
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, which results in a white background.
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
# read).
DOT_TRANSPARENT = NO
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
# support this, this feature is disabled by default.
DOT_MULTI_TARGETS = NO
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs.
GENERATE_LEGEND = YES
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
# the various graphs.
DOT_CLEANUP = YES
#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
+# Configuration::additions related to the search engine
#---------------------------------------------------------------------------
-# The SEARCHENGINE tag specifies whether or not a search engine should be
+# The SEARCHENGINE tag specifies whether or not a search engine should be
# used. If set to NO the values of all tags below this one will be ignored.
SEARCHENGINE = NO
diff --git a/doc/mainpage b/doc/mainpage
--- a/doc/mainpage
+++ b/doc/mainpage
@@ -2,5 +2,5 @@
\mainpage Documentation for libcmpiutil
Browse the interface headers in the "Files" tab above
-
+
*/
diff --git a/eo_parser.c b/eo_parser.c
--- a/eo_parser.c
+++ b/eo_parser.c
@@ -115,16 +115,16 @@
CMPIStatus s;
uint64_t unsigned_val = 0;
int64_t signed_val = 0;
-
+
switch(type) {
case CMPI_uint64:
case CMPI_uint32:
case CMPI_uint16:
case CMPI_uint8:
unsigned_val = (uint64_t) value;
- s = CMSetProperty(inst,
- prop,
- (CMPIValue *) &(unsigned_val),
+ s = CMSetProperty(inst,
+ prop,
+ (CMPIValue *) &(unsigned_val),
type);
break;
case CMPI_sint64:
@@ -133,9 +133,9 @@
case CMPI_sint8:
default:
signed_val = (int64_t) value;
- s = CMSetProperty(inst,
- prop,
- (CMPIValue *) &(signed_val),
+ s = CMSetProperty(inst,
+ prop,
+ (CMPIValue *) &(signed_val),
type);
}
@@ -151,17 +151,17 @@
{
if (_set_int_prop(value, prop, CMPI_uint64, inst) == 1)
return CMPI_uint64;
- else if (_set_int_prop(value, prop, CMPI_uint32, inst) == 1)
+ else if (_set_int_prop(value, prop, CMPI_uint32, inst) == 1)
return CMPI_uint32;
- else if (_set_int_prop(value, prop, CMPI_uint16, inst) == 1)
+ else if (_set_int_prop(value, prop, CMPI_uint16, inst) == 1)
return CMPI_uint16;
else if (_set_int_prop(value, prop, CMPI_uint8, inst) == 1)
return CMPI_uint8;
else if (_set_int_prop(value, prop, CMPI_sint64, inst) == 1)
return CMPI_sint64;
- else if (_set_int_prop(value, prop, CMPI_sint32, inst) == 1)
+ else if (_set_int_prop(value, prop, CMPI_sint32, inst) == 1)
return CMPI_sint32;
- else if (_set_int_prop(value, prop, CMPI_sint16, inst) == 1)
+ else if (_set_int_prop(value, prop, CMPI_sint16, inst) == 1)
return CMPI_sint16;
else
_set_int_prop(value, prop, CMPI_sint8, inst);
@@ -176,7 +176,7 @@
{
CMPIString *cm_str;
CMPIStatus s = {CMPI_RC_OK, NULL};
-
+
cm_str = CMNewString(broker, str, &s);
if (s.rc != CMPI_RC_OK || CMIsNullObject(cm_str)) {
CU_DEBUG("Error creating CMPIString");
diff --git a/eo_util_lexer.l b/eo_util_lexer.l
--- a/eo_util_lexer.l
+++ b/eo_util_lexer.l
@@ -35,11 +35,11 @@
QUOTEDTEXT (\"[^"\n]*["\n])
SINGLEQUOTEDTEXT (\'[^'\n]*['\n])
FILENAME ([A-Za-z0-9\.][A-Za-z0-9\.\-\+\_]*)
-PATHNAME (\/?[A-Za-z0-9\.][A-Za-z0-9\.\-\+\_]*(\/[A-Za-z0-9\.][A-Za-z0-9\.\-\+\_]*)*\/?)
-HOSTNAME ([A-Za-z][A-Za-z0-9\-\_]*(\.[A-Za-z][A-Za-z0-9\-\_]*)*)
+PATHNAME (\/?[A-Za-z0-9\.][A-Za-z0-9\.\-\+\_]*(\/[A-Za-z0-9\.][A-Za-z0-9\.\-\+\_]*)*\/?)
+HOSTNAME ([A-Za-z][A-Za-z0-9\-\_]*(\.[A-Za-z][A-Za-z0-9\-\_]*)*)
IPADDR ([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)
- /* Special mode to read CLASSNAME after reading INSTANCE OF,
+ /* Special mode to read CLASSNAME after reading INSTANCE OF,
* otherwise cannot distinguish this token from a PROPERTYNAME */
%x READCLASSNAME
@@ -143,7 +143,7 @@
void eo_parse_error(char *errmsg)
{
- fprintf(stderr, "error line %d: %s in '%s'\n",
+ fprintf(stderr, "error line %d: %s in '%s'\n",
eolineno, errmsg, eo_parse_text);
}
diff --git a/eo_util_parser.y b/eo_util_parser.y
--- a/eo_util_parser.y
+++ b/eo_util_parser.y
@@ -117,10 +117,10 @@
| PROPERTYNAME '=' INTEGER ';'
{
- EOTRACE("propertyname = %s\n", $1);
+ EOTRACE("propertyname = %s\n", $1);
CMPIType t = set_int_prop($3, $1, *_INSTANCE);
EOTRACE("\ttype = %d\n"
- "\tvalue = %lld\n", t, $3);
+ "\tvalue = %lld\n", t, $3);
free($1);
}
@@ -133,7 +133,7 @@
CMSetProperty(*_INSTANCE, $1, &($3), CMPI_boolean);
free($1);
}
- | PROPERTYNAME '=' OPENBRACKET
+ | PROPERTYNAME '=' OPENBRACKET
{
EOTRACE("propertyname = %s\n"
"\ttype = CMPI_charsA\n",
@@ -142,8 +142,8 @@
stringarraysize = 0;
stringarraypropname = $1;
}
- arrayofstrings CLOSEBRACKET ';'
-
+ arrayofstrings CLOSEBRACKET ';'
+
| PROPERTYNAME '=' CIMNULL ';'
{
EOTRACE("propertyname = %s\n"
@@ -152,38 +152,38 @@
}
;
-arrayofstrings: STRING
+arrayofstrings: STRING
{
- EOTRACE("\t%s[%u]=%s\n",
- propertyname,
- stringarraysize,
+ EOTRACE("\t%s[%u]=%s\n",
+ propertyname,
+ stringarraysize,
$1);
stringarraysize++;
- stringarray = (char **)realloc(stringarray,
- sizeof(char *) *
+ stringarray = (char **)realloc(stringarray,
+ sizeof(char *) *
stringarraysize);
stringarray[stringarraysize-1] = $1;
}
COMMA arrayofstrings
-
+
| STRING
{
CMPIArray *arr;
CMPICount i;
CMPIStatus s = {CMPI_RC_OK, NULL};
-
- EOTRACE("\t%s[%u]=%s\n",
- propertyname,
- stringarraysize,
+
+ EOTRACE("\t%s[%u]=%s\n",
+ propertyname,
+ stringarraysize,
$1);
-
+
stringarraysize++;
- arr = CMNewArray(_BROKER,
- stringarraysize,
- CMPI_string,
+ arr = CMNewArray(_BROKER,
+ stringarraysize,
+ CMPI_string,
&s);
if (s.rc != CMPI_RC_OK || CMIsNullObject(arr)) {
EOTRACE("Error creating array\n");
@@ -200,19 +200,19 @@
if (s.rc != CMPI_RC_OK)
goto str_arr_out;
}
-
- s = ins_chars_into_cmstr_arr(_BROKER,
- arr,
+
+ s = ins_chars_into_cmstr_arr(_BROKER,
+ arr,
stringarraysize - 1,
$1);
if (s.rc != CMPI_RC_OK)
goto str_arr_out;
- CMSetProperty(*_INSTANCE,
+ CMSetProperty(*_INSTANCE,
stringarraypropname,
&arr,
CMPI_stringA);
-
+
str_arr_out:
free(stringarraypropname);
for (i = 0; i < stringarraysize - 1; i++)
@@ -220,9 +220,9 @@
free($1);
if (s.rc != CMPI_RC_OK) {
- return RC_ARR_CREAT_FAILED;
+ return RC_ARR_CREAT_FAILED;
}
-
+
}
;
diff --git a/instance_util.c b/instance_util.c
--- a/instance_util.c
+++ b/instance_util.c
@@ -92,15 +92,15 @@
{
const char *ref_cn;
const char *op_cn;
-
+
ref_cn = CLASSNAME(ref);
if (ref_cn == NULL)
return false;
-
+
op_cn = CLASSNAME(op);
if (op_cn == NULL)
return false;
-
+
return STREQC(op_cn, ref_cn);
}
@@ -108,7 +108,7 @@
const CMPIInstance *inst)
{
CMPIStatus s = {CMPI_RC_OK, NULL};
- CMPIObjectPath *op;
+ CMPIObjectPath *op;
const char *prop = NULL;
int i;
int count;
@@ -119,14 +119,14 @@
if (!_compare_classname(ref, op))
return "CreationClassName";
-
+
count = CMGetKeyCount(op, &s);
if (s.rc != CMPI_RC_OK) {
CU_DEBUG("Unable to get key count");
return NULL;
}
CU_DEBUG("Number of keys: %i", count);
-
+
for (i = 0; i < count; i++) {
CMPIData kd, pd;
CMPIString *str;
@@ -163,14 +163,14 @@
{
CMPIStatus s = {CMPI_RC_OK, NULL};
const char *prop;
-
+
prop = cu_compare_ref(ref, inst);
if (prop != NULL) {
cu_statusf(broker, &s,
CMPI_RC_ERR_NOT_FOUND,
"No such instance (%s)", prop);
}
-
+
return s;
}
@@ -182,7 +182,7 @@
CMPIStatus s = {CMPI_RC_OK, NULL};
if (src_name == NULL) {
- cu_statusf(broker, &s,
+ cu_statusf(broker, &s,
CMPI_RC_ERR_FAILED,
"No property name given");
goto out;
@@ -193,7 +193,7 @@
data = CMGetProperty(src_inst, src_name, &s);
if (s.rc != CMPI_RC_OK || CMIsNullValue(data)) {
- cu_statusf(broker, &s,
+ cu_statusf(broker, &s,
CMPI_RC_ERR_FAILED,
"Copy failed. Could not get prop '%s'.", src_name);
goto out;
@@ -202,7 +202,7 @@
CMSetProperty(dest_inst, dest_name, &(data.value), data.type);
out:
- return s;
+ return s;
}
CMPIInstance *cu_dup_instance(const CMPIBroker *broker,
@@ -222,7 +222,7 @@
"Could not get objectpath from instance");
goto out;
}
-
+
dest = CMNewInstance(broker, ref, s);
prop_count = CMGetPropertyCount(src, s);
@@ -242,8 +242,8 @@
if (s->rc != CMPI_RC_OK) {
goto out;
}
-
- *s = CMSetProperty(dest, prop_name,
+
+ *s = CMSetProperty(dest, prop_name,
&(data.value), data.type);
if (s->rc != CMPI_RC_OK) {
goto out;
@@ -302,7 +302,7 @@
ref = CMGetObjectPath(inst, NULL);
if (CMIsNullObject(ref))
goto out;
-
+
ret = CLASSNAME(ref);
out:
diff --git a/libcmpiutil.h b/libcmpiutil.h
--- a/libcmpiutil.h
+++ b/libcmpiutil.h
@@ -44,7 +44,7 @@
#define CU_STRINGIFY(x) _CU_STRINGIFY(x)
/**
- * Dispatch macro for debug_print, fills in the function name and line number
+ * Dispatch macro for debug_print, fills in the function name and line number
* of caller.
*/
#define CU_DEBUG(fmt, args...) { \
@@ -60,7 +60,7 @@
void debug_print(char *fmt, ...);
/**
- * Copies a property from one CMPIInstance to another. If dest_name is NULL,
+ * Copies a property from one CMPIInstance to another. If dest_name is NULL,
* it is assumed to be the same as src_name.
*
* @param broker CIM broker, needed for status calls
@@ -69,7 +69,7 @@
* @param src_name Name of property to be copied from src_inst
* @param dest_name Name of property to be copied to dest_inst
*/
-CMPIStatus cu_copy_prop(const CMPIBroker *broker,
+CMPIStatus cu_copy_prop(const CMPIBroker *broker,
CMPIInstance *src_inst, CMPIInstance *dest_inst,
char *src_name, char *dest_name);
@@ -167,7 +167,7 @@
*
* @param src Source instance
* @param dest Destination instance
- * @returns {CMPI_RC_OK, NULL} if success, CMPI_RC ERR_FAILED and
+ * @returns {CMPI_RC_OK, NULL} if success, CMPI_RC ERR_FAILED and
* error message otherwise
*/
CMPIStatus cu_merge_instances(CMPIInstance *src,
@@ -178,7 +178,7 @@
*
* @param src Source instance
* @param dest Destination instance
- * @returns {CMPI_RC_OK, NULL} if success, CMPI_RC ERR_FAILED and
+ * @returns {CMPI_RC_OK, NULL} if success, CMPI_RC ERR_FAILED and
* error message otherwise
*/
CMPIInstance *cu_dup_instance(const CMPIBroker *broker,
@@ -226,8 +226,8 @@
* @param prop The property name
* @param target A pointer to a CMPIarray that will be set
* if successful
- * @returns
- * - CMPI_RC_OK on success,
+ * @returns
+ * - CMPI_RC_OK on success,
* - CMPI_RC_ERR_NO_SUCH_PROPERTY if prop is not present,
* - CMPI_RC_ERR_TYPE_MISMATCH if prop is not an array,
* - CMPI_RC_ERROR otherwise
@@ -243,8 +243,8 @@
* @param prop The property name
* @param target A pointer to a char* that will be set to a malloc'd string
* if successful
- * @returns
- * - CMPI_RC_OK on success,
+ * @returns
+ * - CMPI_RC_OK on success,
* - CMPI_RC_ERR_NO_SUCH_PROPERTY if prop is not present,
* - CMPI_RC_ERR_TYPE_MISMATCH if prop is not a string,
* - CMPI_RC_ERROR otherwise
@@ -259,8 +259,8 @@
* @param inst The instance
* @param prop The property name
* @param target A pointer to a bool that will reflect the property status
- * @returns
- * - CMPI_RC_OK on success,
+ * @returns
+ * - CMPI_RC_OK on success,
* - CMPI_RC_ERR_NO_SUCH_PROPERTY if prop is not present,
* - CMPI_RC_ERR_TYPE_MISMATCH if prop is not a boolean,
* - CMPI_RC_ERROR otherwise
@@ -291,8 +291,8 @@
* @param inst The instance
* @param prop The property name
* @param target A pointer to a uint32_t that will reflect the property value
- * @returns
- * - CMPI_RC_OK on success,
+ * @returns
+ * - CMPI_RC_OK on success,
* - CMPI_RC_ERR_NO_SUCH_PROPERTY if prop is not present,
* - CMPI_RC_ERR_TYPE_MISMATCH if prop is not a uint32,
* - CMPI_RC_ERROR otherwise
@@ -307,8 +307,8 @@
* @param inst The instance
* @param prop The property name
* @param target A pointer to a uint64_t that will reflect the property value
- * @returns
- * - CMPI_RC_OK on success,
+ * @returns
+ * - CMPI_RC_OK on success,
* - CMPI_RC_ERR_NO_SUCH_PROPERTY if prop is not present,
* - CMPI_RC_ERR_TYPE_MISMATCH if prop is not a uint64,
* - CMPI_RC_ERROR otherwise
@@ -425,7 +425,7 @@
/**
* Validate a client given reference against the system instance.
- * This is done by comparing the key values of the reference
+ * This is done by comparing the key values of the reference
* against the key properties found in the system instance.
*
* @param broker A pointer to the current broker
@@ -440,7 +440,7 @@
const CMPIInstance *inst);
/**
- * Returns the classname from an instance without forcing user to get
+ * Returns the classname from an instance without forcing user to get
* ObjectPath first.
*
* @param inst Instance to examine
diff --git a/libcmpiutil.spec.in b/libcmpiutil.spec.in
--- a/libcmpiutil.spec.in
+++ b/libcmpiutil.spec.in
@@ -20,7 +20,7 @@
The goal is to reduce the amount of repetitive work done in
most CMPI providers by encapsulating common procedures with more
"normal" APIs. This extends from operations like getting typed
-instance properties to standardizing method dispatch and argument checking.
+instance properties to standardizing method dispatch and argument checking.
%package devel
Summary: Libraries, includes, etc. to use the CMPI utility library
@@ -34,7 +34,7 @@
The goal is to reduce the amount of repetitive work done in
most CMPI providers by encapsulating common procedures with more
"normal" APIs. This extends from operations like getting typed
-instance properties to standardizing method dispatch and argument checking.
+instance properties to standardizing method dispatch and argument checking.
%prep
%setup -q
@@ -58,7 +58,7 @@
%postun -p /sbin/ldconfig
-%files
+%files
%defattr(-, root, root, -)
%doc doc/doxygen.conf doc/mainpage README COPYING
diff --git a/std_association.c b/std_association.c
--- a/std_association.c
+++ b/std_association.c
@@ -68,7 +68,7 @@
if (comp_class_list == NULL)
return true;
-
+
for (i = 0; comp_class_list[i]; i++) {
comp_class = comp_class_list[i];
rop = CMNewObjectPath(broker, ns, comp_class, NULL);
@@ -89,10 +89,10 @@
for (i = 0; ptr->source_class[i]; i++) {
source_class = ptr->source_class[i];
-
- if (CMClassPathIsA(broker,
- ref,
- source_class,
+
+ if (CMClassPathIsA(broker,
+ ref,
+ source_class,
NULL))
return true;
}
@@ -151,9 +151,9 @@
if (!match_source_class(ctx->brkr, ref, ptr)) {
CU_DEBUG("Source class doesn't match");
- continue;
+ continue;
}
-
+
if (!ptr) {
CU_DEBUG("Invalid pointer");
continue;
@@ -162,50 +162,50 @@
if (info->assoc_class) {
CU_DEBUG("Check client's assocClass: '%s'",
info->assoc_class);
-
- rc = match_class(ctx->brkr,
- NAMESPACE(ref),
+
+ rc = match_class(ctx->brkr,
+ NAMESPACE(ref),
info->assoc_class,
ptr->assoc_class);
-
+
if (!rc) {
CU_DEBUG("AssocClass not valid.");
continue;
}
CU_DEBUG("AssocClass valid.");
}
-
+
if (info->result_class) {
CU_DEBUG("Check client's resultClass: '%s'",
info->result_class);
-
- rc = match_class(ctx->brkr,
- NAMESPACE(ref),
- info->result_class,
+
+ rc = match_class(ctx->brkr,
+ NAMESPACE(ref),
+ info->result_class,
ptr->target_class);
-
+
if (!rc) {
CU_DEBUG("ResultClass not valid.");
continue;
}
CU_DEBUG("ResultClass valid.");
}
-
+
if (info->role) {
CU_DEBUG("Check client's role: '%s'",
info->role);
-
+
if (!STREQC(info->role, ptr->source_prop)) {
CU_DEBUG("Invalid role");
continue;
}
CU_DEBUG("Role valid.");
}
-
+
if (info->result_role) {
CU_DEBUG("Check client's resultRole: '%s'",
info->result_role);
-
+
if (!STREQC(info->result_role, ptr->target_prop)) {
CU_DEBUG("ResultRole not valid.");
continue;
@@ -216,9 +216,9 @@
goto out;
}
- CU_DEBUG("No valid handler found");
+ CU_DEBUG("No valid handler found");
ptr = NULL;
-
+
out:
return ptr;
}
@@ -240,11 +240,11 @@
for (i = 0; i < tmp_list.cur; i++) {
CMPIInstance *refinst;
-
+
refinst = handler->make_ref(ref, tmp_list.list[i], info, handler);
if (refinst == NULL)
continue;
-
+
inst_list_add(list, refinst);
}
@@ -271,7 +271,7 @@
CU_DEBUG("filter_results did not return CMPI_RC_OK.");
return s;
}
-
+
return s;
}
@@ -377,7 +377,7 @@
info,
ref,
&list);
-
+
if (s.rc != CMPI_RC_OK) {
CU_DEBUG("Prepare return list did not return CMPI_RC_OK.");
goto out;
diff --git a/std_association.h b/std_association.h
--- a/std_association.h
+++ b/std_association.h
@@ -41,18 +41,18 @@
* std_assoc is the definition that the developer puts in their source file. It
* defines an association relationship between a set of source and target
* classes, through a named (set of) association classes and the function
- * handler which does the work.
- * It must be registered using the macro STDA_AssocMIStub.
+ * handler which does the work.
+ * It must be registered using the macro STDA_AssocMIStub.
*/
struct std_assoc {
- /* Defines the list of possible classes that can be passed to the
+ /* Defines the list of possible classes that can be passed to the
association for this case */
char **source_class;
-
- /* Defines the property of the association class that refers
+
+ /* Defines the property of the association class that refers
to the input (source class) of this case. This must match
- that of the schema, and is used for automatic generation of
+ that of the schema, and is used for automatic generation of
the reference object in the References() or ReferenceNames()
operation */
char *source_prop;
@@ -63,20 +63,20 @@
/* Same as source_prop, applied for target */
char *target_prop;
-
+
/* Defines the list of association classes which are implemented by
this handler */
char **assoc_class;
/* Function handler responsible for doing the association and
returning the list of target instances of the association.
- The handler function receives the reference of the source
- class of the association and must map it to a list of
+ The handler function receives the reference of the source
+ class of the association and must map it to a list of
CMPIInstance objects (targets of the association). */
assoc_handler_t handler;
/* Function handler responsible for creating an instance of the
- association class.
+ association class.
The handler function receives the source object path,
and the target instance, so it can create the reference which is
returned by the function. */
diff --git a/std_indication.c b/std_indication.c
--- a/std_indication.c
+++ b/std_indication.c
@@ -49,7 +49,7 @@
break;
}
}
-
+
if (filter == NULL)
CU_DEBUG("get_ind_filter: failed to find %s", ind_name);
@@ -76,7 +76,7 @@
"No std_ind_filter for %s", ind_name);
goto out;
}
-
+
ret = filter->active;
if (!ret)
CU_DEBUG("Indication '%s' not in active filter", ind_name);
@@ -101,12 +101,12 @@
CMPIStatus s = {CMPI_RC_OK, NULL};
s = CMSetObjectPath(ind, ref);
- if (s.rc != CMPI_RC_OK)
+ if (s.rc != CMPI_RC_OK)
return s;
CBDeliverIndication(broker,
- context,
- NAMESPACE(ref),
+ context,
+ NAMESPACE(ref),
ind);
return s;
}
@@ -209,7 +209,7 @@
"Provider has no indication '%s'", ind_name);
goto out;
}
-
+
filter->active = state;
out:
@@ -226,7 +226,7 @@
CMPIStatus s = {CMPI_RC_OK, NULL};
struct std_indication_ctx *_ctx;
const char *cn = NULL;
-
+
_ctx = (struct std_indication_ctx *)mi->hdl;
cn = CLASSNAME(op);
s = stdi_set_ind_filter_state(_ctx, cn, true);
@@ -397,7 +397,7 @@
return s;
CBInvokeMethod(broker, context, op, method, argsin, argsout, &s);
-
+
return s;
}
diff --git a/std_instance.h b/std_instance.h
--- a/std_instance.h
+++ b/std_instance.h
@@ -24,11 +24,11 @@
#define __STD_INSTANCE_H
/**
- * Generates the function table and initialization stub for an
+ * Generates the function table and initialization stub for an
* instance provider.
- * @param pfx The prefix for all mandatory association provider
+ * @param pfx The prefix for all mandatory association provider
* functions.
- * @param pn The provider name under which this provider is
+ * @param pn The provider name under which this provider is
* registered.
* @param broker The CMPIBroker pointer.
* @param hook Perform additional initialization functions.
diff --git a/std_invokemethod.c b/std_invokemethod.c
--- a/std_invokemethod.c
+++ b/std_invokemethod.c
@@ -70,7 +70,7 @@
return 0;
}
- return 1;
+ return 1;
}
static int parse_eo_array(CMPIArray *strings_in,
@@ -168,9 +168,9 @@
return 1;
}
-static int validate_arg_type(struct method_arg *arg,
+static int validate_arg_type(struct method_arg *arg,
const CMPIArgs *args,
- const CMPIBroker *broker,
+ const CMPIBroker *broker,
const char *ns,
CMPIArgs *new_args,
CMPIStatus *s)
@@ -228,7 +228,7 @@
return 1;
}
-static int validate_args(struct method_handler *h,
+static int validate_args(struct method_handler *h,
const CMPIArgs **args,
const CMPIObjectPath *ref,
const CMPIBroker *broker,
@@ -243,10 +243,10 @@
int ret;
struct method_arg *arg = &h->args[i];
- ret = validate_arg_type(arg,
- *args,
- broker,
- NAMESPACE(ref),
+ ret = validate_arg_type(arg,
+ *args,
+ broker,
+ NAMESPACE(ref),
new_args,
s);
if (!ret)
@@ -288,10 +288,10 @@
goto exit;
}
- ret = validate_args(h,
- &argsin,
+ ret = validate_args(h,
+ &argsin,
reference,
- ctx->broker,
+ ctx->broker,
&s);
if (!ret)
goto exit;
@@ -302,7 +302,7 @@
exit:
CMReturnDone(results);
- return s;
+ return s;
}
CMPIStatus _std_cleanup(CMPIMethodMI *self,
diff --git a/tools/indication_tester.py b/tools/indication_tester.py
--- a/tools/indication_tester.py
+++ b/tools/indication_tester.py
@@ -14,264 +14,264 @@
def filter_xml(name, type, ns, sysname):
return """
- <?xml version="1.0" encoding="utf-8"?>
- <CIM CIMVERSION="2.0" DTDVERSION="2.0">
- <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
- <SIMPLEREQ>
- <IMETHODCALL NAME="CreateInstance">
- <LOCALNAMESPACEPATH>
- <NAMESPACE NAME="root"/>
- <NAMESPACE NAME="PG_InterOp"/>
- </LOCALNAMESPACEPATH>
- <IPARAMVALUE NAME="NewInstance">
+ <?xml version="1.0" encoding="utf-8"?>
+ <CIM CIMVERSION="2.0" DTDVERSION="2.0">
+ <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
+ <SIMPLEREQ>
+ <IMETHODCALL NAME="CreateInstance">
+ <LOCALNAMESPACEPATH>
+ <NAMESPACE NAME="root"/>
+ <NAMESPACE NAME="PG_InterOp"/>
+ </LOCALNAMESPACEPATH>
+ <IPARAMVALUE NAME="NewInstance">
<INSTANCE CLASSNAME="CIM_IndicationFilter">
- <PROPERTY NAME="SystemCreationClassName" TYPE="string">
- <VALUE>CIM_ComputerSystem</VALUE>
- </PROPERTY>
- <PROPERTY NAME="SystemName" TYPE="string">
- <VALUE>%s</VALUE>
- </PROPERTY>
- <PROPERTY NAME="CreationClassName" TYPE="string">
- <VALUE>CIM_IndicationFilter</VALUE>
- </PROPERTY>
- <PROPERTY NAME="Name" TYPE="string">
- <VALUE>%sFilter</VALUE>
- </PROPERTY>
- <PROPERTY NAME="Query" TYPE="string">
- <VALUE> SELECT * FROM %s
- </VALUE>
- </PROPERTY>
- <PROPERTY NAME="QueryLanguage" TYPE="string">
- <VALUE>WQL</VALUE>
- </PROPERTY>
- <PROPERTY NAME="SourceNamespace" TYPE="string">
- <VALUE>%s</VALUE>
- </PROPERTY>
- </INSTANCE>
- </IPARAMVALUE>
- </IMETHODCALL>
- </SIMPLEREQ>
- </MESSAGE>
+ <PROPERTY NAME="SystemCreationClassName" TYPE="string">
+ <VALUE>CIM_ComputerSystem</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="SystemName" TYPE="string">
+ <VALUE>%s</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="CreationClassName" TYPE="string">
+ <VALUE>CIM_IndicationFilter</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="Name" TYPE="string">
+ <VALUE>%sFilter</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="Query" TYPE="string">
+ <VALUE> SELECT * FROM %s
+ </VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="QueryLanguage" TYPE="string">
+ <VALUE>WQL</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="SourceNamespace" TYPE="string">
+ <VALUE>%s</VALUE>
+ </PROPERTY>
+ </INSTANCE>
+ </IPARAMVALUE>
+ </IMETHODCALL>
+ </SIMPLEREQ>
+ </MESSAGE>
</CIM>
""" % (sysname, name, type, ns)
def handler_xml(name, port, sysname):
return """
- <?xml version="1.0" encoding="utf-8"?>
- <CIM CIMVERSION="2.0" DTDVERSION="2.0">
- <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
- <SIMPLEREQ>
- <IMETHODCALL NAME="CreateInstance">
- <LOCALNAMESPACEPATH>
- <NAMESPACE NAME="root"/>
- <NAMESPACE NAME="PG_InterOp"/>
- </LOCALNAMESPACEPATH>
- <IPARAMVALUE NAME="NewInstance">
- <INSTANCE CLASSNAME="CIM_IndicationHandlerCIMXML">
- <PROPERTY NAME="SystemCreationClassName" TYPE="string">
- <VALUE>CIM_ComputerSystem</VALUE>
- </PROPERTY>
- <PROPERTY NAME="SystemName" TYPE="string">
- <VALUE>%s</VALUE>
- </PROPERTY>
- <PROPERTY NAME="CreationClassName" TYPE="string">
- <VALUE>CIM_IndicationHandlerCIMXML</VALUE>
- </PROPERTY>
- <PROPERTY NAME="Name" TYPE="string">
- <VALUE>%sHandler</VALUE>
- </PROPERTY>
- <PROPERTY NAME="Destination" TYPE="string">
- <VALUE>http://localhost:%i</VALUE>
- </PROPERTY>
- </INSTANCE>
- </IPARAMVALUE>
- </IMETHODCALL>
- </SIMPLEREQ>
- </MESSAGE>
+ <?xml version="1.0" encoding="utf-8"?>
+ <CIM CIMVERSION="2.0" DTDVERSION="2.0">
+ <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
+ <SIMPLEREQ>
+ <IMETHODCALL NAME="CreateInstance">
+ <LOCALNAMESPACEPATH>
+ <NAMESPACE NAME="root"/>
+ <NAMESPACE NAME="PG_InterOp"/>
+ </LOCALNAMESPACEPATH>
+ <IPARAMVALUE NAME="NewInstance">
+ <INSTANCE CLASSNAME="CIM_IndicationHandlerCIMXML">
+ <PROPERTY NAME="SystemCreationClassName" TYPE="string">
+ <VALUE>CIM_ComputerSystem</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="SystemName" TYPE="string">
+ <VALUE>%s</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="CreationClassName" TYPE="string">
+ <VALUE>CIM_IndicationHandlerCIMXML</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="Name" TYPE="string">
+ <VALUE>%sHandler</VALUE>
+ </PROPERTY>
+ <PROPERTY NAME="Destination" TYPE="string">
+ <VALUE>http://localhost:%i</VALUE>
+ </PROPERTY>
+ </INSTANCE>
+ </IPARAMVALUE>
+ </IMETHODCALL>
+ </SIMPLEREQ>
+ </MESSAGE>
</CIM>
""" % (sysname, name, port)
def subscription_xml(name, sysname):
return """
- <?xml version="1.0" encoding="utf-8"?>
- <CIM CIMVERSION="2.0" DTDVERSION="2.0">
- <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
- <SIMPLEREQ>
- <IMETHODCALL NAME="CreateInstance">
- <LOCALNAMESPACEPATH>
- <NAMESPACE NAME="root"/>
- <NAMESPACE NAME="PG_InterOp"/>
- </LOCALNAMESPACEPATH>
- <IPARAMVALUE NAME="NewInstance">
- <INSTANCE CLASSNAME="CIM_IndicationSubscription">
- <PROPERTY.REFERENCE NAME="Filter"
- REFERENCECLASS="CIM_IndicationFilter">
- <VALUE.REFERENCE>
- <INSTANCENAME CLASSNAME="CIM_IndicationFilter">
- <KEYBINDING NAME="SystemCreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_ComputerSystem
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="SystemName">
- <KEYVALUE VALUETYPE="string">
- %s
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="CreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_IndicationFilter
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="Name">
- <KEYVALUE VALUETYPE="string">
- %sFilter
- </KEYVALUE>
- </KEYBINDING>
- </INSTANCENAME>
- </VALUE.REFERENCE>
- </PROPERTY.REFERENCE>
- <PROPERTY.REFERENCE NAME="Handler"
- REFERENCECLASS="CIM_IndicationHandler">
- <VALUE.REFERENCE>
- <INSTANCENAME CLASSNAME="CIM_IndicationHandlerCIMXML">
- <KEYBINDING NAME="SystemCreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_ComputerSystem
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="SystemName">
- <KEYVALUE VALUETYPE="string">
+ <?xml version="1.0" encoding="utf-8"?>
+ <CIM CIMVERSION="2.0" DTDVERSION="2.0">
+ <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
+ <SIMPLEREQ>
+ <IMETHODCALL NAME="CreateInstance">
+ <LOCALNAMESPACEPATH>
+ <NAMESPACE NAME="root"/>
+ <NAMESPACE NAME="PG_InterOp"/>
+ </LOCALNAMESPACEPATH>
+ <IPARAMVALUE NAME="NewInstance">
+ <INSTANCE CLASSNAME="CIM_IndicationSubscription">
+ <PROPERTY.REFERENCE NAME="Filter"
+ REFERENCECLASS="CIM_IndicationFilter">
+ <VALUE.REFERENCE>
+ <INSTANCENAME CLASSNAME="CIM_IndicationFilter">
+ <KEYBINDING NAME="SystemCreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_ComputerSystem
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="SystemName">
+ <KEYVALUE VALUETYPE="string">
%s
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="CreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_IndicationHandlerCIMXML
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="Name">
- <KEYVALUE VALUETYPE="string">
- %sHandler
- </KEYVALUE>
- </KEYBINDING>
- </INSTANCENAME>
- </VALUE.REFERENCE>
- </PROPERTY.REFERENCE>
- <PROPERTY NAME="SubscriptionState" TYPE="uint16">
- <VALUE> 2 </VALUE>
- </PROPERTY>
- </INSTANCE>
- </IPARAMVALUE>
- </IMETHODCALL>
- </SIMPLEREQ>
- </MESSAGE>
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="CreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_IndicationFilter
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="Name">
+ <KEYVALUE VALUETYPE="string">
+ %sFilter
+ </KEYVALUE>
+ </KEYBINDING>
+ </INSTANCENAME>
+ </VALUE.REFERENCE>
+ </PROPERTY.REFERENCE>
+ <PROPERTY.REFERENCE NAME="Handler"
+ REFERENCECLASS="CIM_IndicationHandler">
+ <VALUE.REFERENCE>
+ <INSTANCENAME CLASSNAME="CIM_IndicationHandlerCIMXML">
+ <KEYBINDING NAME="SystemCreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_ComputerSystem
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="SystemName">
+ <KEYVALUE VALUETYPE="string">
+ %s
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="CreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_IndicationHandlerCIMXML
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="Name">
+ <KEYVALUE VALUETYPE="string">
+ %sHandler
+ </KEYVALUE>
+ </KEYBINDING>
+ </INSTANCENAME>
+ </VALUE.REFERENCE>
+ </PROPERTY.REFERENCE>
+ <PROPERTY NAME="SubscriptionState" TYPE="uint16">
+ <VALUE> 2 </VALUE>
+ </PROPERTY>
+ </INSTANCE>
+ </IPARAMVALUE>
+ </IMETHODCALL>
+ </SIMPLEREQ>
+ </MESSAGE>
</CIM>
""" % (sysname, name, sysname, name)
def delete_inst_xml(name, type, sysname, inst_name):
return """
- <?xml version="1.0" encoding="utf-8"?>
- <CIM CIMVERSION="2.0" DTDVERSION="2.0">
- <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
- <SIMPLEREQ>
- <IMETHODCALL NAME="DeleteInstance">
- <LOCALNAMESPACEPATH>
- <NAMESPACE NAME="root"/>
- <NAMESPACE NAME="PG_InterOp"/>
- </LOCALNAMESPACEPATH>
- <IPARAMVALUE NAME="InstanceName">
- <INSTANCENAME CLASSNAME="CIM_Indication%s">
- <KEYBINDING NAME="SystemCreationClassName">
- <KEYVALUE>CIM_ComputerSystem</KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="SystemName">
- <KEYVALUE>%s</KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="CreationClassName">
- <KEYVALUE>CIM_Indication%s</KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="Name">
- <KEYVALUE>%s</KEYVALUE>
- </KEYBINDING>
- </INSTANCENAME>
- </IPARAMVALUE>
- </IMETHODCALL>
- </SIMPLEREQ>
- </MESSAGE>
+ <?xml version="1.0" encoding="utf-8"?>
+ <CIM CIMVERSION="2.0" DTDVERSION="2.0">
+ <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
+ <SIMPLEREQ>
+ <IMETHODCALL NAME="DeleteInstance">
+ <LOCALNAMESPACEPATH>
+ <NAMESPACE NAME="root"/>
+ <NAMESPACE NAME="PG_InterOp"/>
+ </LOCALNAMESPACEPATH>
+ <IPARAMVALUE NAME="InstanceName">
+ <INSTANCENAME CLASSNAME="CIM_Indication%s">
+ <KEYBINDING NAME="SystemCreationClassName">
+ <KEYVALUE>CIM_ComputerSystem</KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="SystemName">
+ <KEYVALUE>%s</KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="CreationClassName">
+ <KEYVALUE>CIM_Indication%s</KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="Name">
+ <KEYVALUE>%s</KEYVALUE>
+ </KEYBINDING>
+ </INSTANCENAME>
+ </IPARAMVALUE>
+ </IMETHODCALL>
+ </SIMPLEREQ>
+ </MESSAGE>
</CIM>;
""" % (type, sysname, type, inst_name);
def delete_sub_xml(name, sysname):
return """
- <?xml version="1.0" encoding="utf-8"?>
- <CIM CIMVERSION="2.0" DTDVERSION="2.0">
- <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
- <SIMPLEREQ>
- <IMETHODCALL NAME="DeleteInstance">
- <LOCALNAMESPACEPATH>
- <NAMESPACE NAME="root"/>
- <NAMESPACE NAME="PG_InterOp"/>
- </LOCALNAMESPACEPATH>
- <IPARAMVALUE NAME="InstanceName">
- <INSTANCENAME CLASSNAME="CIM_IndicationSubscription">
- <KEYBINDING NAME="Filter">
- <VALUE.REFERENCE>
- <INSTANCENAME CLASSNAME="CIM_IndicationFilter">
- <KEYBINDING NAME="SystemCreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_ComputerSystem
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="SystemName">
- <KEYVALUE VALUETYPE="string">
+ <?xml version="1.0" encoding="utf-8"?>
+ <CIM CIMVERSION="2.0" DTDVERSION="2.0">
+ <MESSAGE ID="4711" PROTOCOLVERSION="1.0">
+ <SIMPLEREQ>
+ <IMETHODCALL NAME="DeleteInstance">
+ <LOCALNAMESPACEPATH>
+ <NAMESPACE NAME="root"/>
+ <NAMESPACE NAME="PG_InterOp"/>
+ </LOCALNAMESPACEPATH>
+ <IPARAMVALUE NAME="InstanceName">
+ <INSTANCENAME CLASSNAME="CIM_IndicationSubscription">
+ <KEYBINDING NAME="Filter">
+ <VALUE.REFERENCE>
+ <INSTANCENAME CLASSNAME="CIM_IndicationFilter">
+ <KEYBINDING NAME="SystemCreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_ComputerSystem
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="SystemName">
+ <KEYVALUE VALUETYPE="string">
%s
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="CreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_IndicationFilter
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="Name">
- <KEYVALUE VALUETYPE="string">
- %sFilter
- </KEYVALUE>
- </KEYBINDING>
- </INSTANCENAME>
- </VALUE.REFERENCE>
- </KEYBINDING>
- <KEYBINDING NAME="Handler">
- <VALUE.REFERENCE>
- <INSTANCENAME CLASSNAME="CIM_IndicationHandlerCIMXML">
- <KEYBINDING NAME="SystemCreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_ComputerSystem
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="SystemName">
- <KEYVALUE VALUETYPE="string">
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="CreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_IndicationFilter
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="Name">
+ <KEYVALUE VALUETYPE="string">
+ %sFilter
+ </KEYVALUE>
+ </KEYBINDING>
+ </INSTANCENAME>
+ </VALUE.REFERENCE>
+ </KEYBINDING>
+ <KEYBINDING NAME="Handler">
+ <VALUE.REFERENCE>
+ <INSTANCENAME CLASSNAME="CIM_IndicationHandlerCIMXML">
+ <KEYBINDING NAME="SystemCreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_ComputerSystem
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="SystemName">
+ <KEYVALUE VALUETYPE="string">
%s
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="CreationClassName">
- <KEYVALUE VALUETYPE="string">
- CIM_IndicationHandlerCIMXML
- </KEYVALUE>
- </KEYBINDING>
- <KEYBINDING NAME="Name">
- <KEYVALUE VALUETYPE="string">
- %sHandler
- </KEYVALUE>
- </KEYBINDING>
- </INSTANCENAME>
- </VALUE.REFERENCE>
- </KEYBINDING>
- </INSTANCENAME>
- </IPARAMVALUE>
- </IMETHODCALL>
- </SIMPLEREQ>
- </MESSAGE>
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="CreationClassName">
+ <KEYVALUE VALUETYPE="string">
+ CIM_IndicationHandlerCIMXML
+ </KEYVALUE>
+ </KEYBINDING>
+ <KEYBINDING NAME="Name">
+ <KEYVALUE VALUETYPE="string">
+ %sHandler
+ </KEYVALUE>
+ </KEYBINDING>
+ </INSTANCENAME>
+ </VALUE.REFERENCE>
+ </KEYBINDING>
+ </INSTANCENAME>
+ </IPARAMVALUE>
+ </IMETHODCALL>
+ </SIMPLEREQ>
+ </MESSAGE>
</CIM>;
""" % (sysname, name, sysname, name)
@@ -304,8 +304,8 @@
self.ns = ns
self.sysname = sysname
- self.port = 8000 + port
- self.server = BaseHTTPServer.HTTPServer(('', self.port),
+ self.port = 8000 + port
+ self.server = BaseHTTPServer.HTTPServer(('', self.port),
CIMSocketHandler)
self.server.print_ind = print_ind
self.server.indications = []
@@ -319,14 +319,14 @@
"CIMMethod" : method,
"CIMObject" : "root/PG_Interop",
"Content-Type" : 'application/xml; charset="utf-8"'}
-
+
if auth_hdr:
headers["Authorization"] = "Basic %s" % auth_hdr
conn.request("POST", "/cimom", body, headers)
resp = conn.getresponse()
if not resp.getheader("content-length"):
- raise Exception("Request Failed: %d %s" %
+ raise Exception("Request Failed: %d %s" %
(resp.status, resp.reason))
resp.read()
@@ -380,11 +380,11 @@
print "DeleteHandler:\n%s\n" % del_handler_str
print "CreateSubscription:\n%s\n" % subscript_str
print "DeleteSubscription:\n%s\n" % del_subscript_str
-
+
def main():
usage = "usage: %prog [options] provider\nex: %prog CIM_InstModification"
parser = OptionParser(usage)
-
+
parser.add_option("-u", "--url", dest="url", default="localhost:5988",
help="URL of CIMOM to connect to (host:port)")
parser.add_option("-N", "--ns", dest="ns", default="root/virt",
@@ -410,17 +410,17 @@
if len(args) == 0:
print "Fatal: no indication type provided."
sys.exit(1)
-
+
if options.username:
auth = (options.username, options.password)
else:
auth = None
-
+
if ":" in options.url:
(sysname, port) = options.url.split(":")
else:
sysname = options.url
-
+
if options.dump:
dump_xml(options.name, args[0], options.ns, sysname)
sys.exit(0)
More information about the Libvirt-cim
mailing list