[libvirt-users] using RBD with libvirt 0.9.13
Jeff Strunk
jstrunk at math.utexas.edu
Mon Aug 6 19:12:22 UTC 2012
I'm having some trouble creating KVM domains with RBD block devices using
virsh. I've managed to get virsh to define the domain, but it gives an error
when trying to start the domain:
error: Failed to start domain test0
error: internal error process exited while connecting to monitor: char device redirected to /dev/pts/3
kvm: -drive file=rbd:rbd/test0,if=none,id=drive-virtio-disk0,format=raw: error connecting
kvm: -drive file=rbd:rbd/test0,if=none,id=drive-virtio-disk0,format=raw: could not open disk image rbd:rbd/test0: No such file or directory
>From libvirt's QEMU log:
2012-08-06 18:36:57.788+0000: starting up
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -name test0 -S -M pc-1.0 -enable-kvm -m 1024 -smp 1,sockets=1,cores=1,threads=1 -uuid 3e727624-f336-d674-4e0c-234641fc9987 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/test0.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=rbd:rbd/test0,if=none,id=drive-virtio-disk0,format=raw -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive if=none,id=drive-ide0-1-0,readonly=on,format=raw -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=19,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:8c:e4:92,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
Domain id=5 is tainted: high-privileges
char device redirected to /dev/pts/2
kvm: -drive file=rbd:rbd/test0,if=none,id=drive-virtio-disk0,format=raw: error connecting
kvm: -drive file=rbd:rbd/test0,if=none,id=drive-virtio-disk0,format=raw: could not open disk image rbd:rbd/test0: No such file or directory
2012-08-06 18:36:58.353+0000: shutting down
I can, however, successfully run a KVM virtual machine with an RBD block
device with the following command:
kvm -drive file=rbd:rbd/test1,id=drive-virtio-disk0,format=raw -cdrom /var/lib/libvirt/images/ubuntu-12.04-server-amd64.iso
kvm will boot with the "-drive file=rbd:rbd/test0,if=none,id=drive-virtio-disk0,format=raw"
options, but the disk is not detected unless "if=none" is removed.
Has anyone else figured this out?
Thank you,
Jeff
Here is my rbd pool definition:
######### BEGIN
<pool type="rbd">
<name>rbd</name>
<source>
<name>rbd</name>
<host name='thinkmate3' port='6789'/>
<host name='thinkmate4' port='6789'/>
<auth username='admin' type='ceph'>
<secret uuid='f0836fcb-9c05-5ccf-653a-eb1d0308e247'/>
</auth>
</source>
</pool>
######### END
My rbd volumes:
# virsh vol-list rbd
Name Path
-----------------------------------------
test0 rbd/test0
test1 rbd/test1
test2 rbd/test2
Here is my domain definition:
######### BEGIN
<domain type='kvm'>
<name>test0</name>
<uuid>3e727624-f336-d674-4e0c-234641fc9987</uuid>
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='x86_64' machine='pc-1.0'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/kvm</emulator>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='rbd' name='rbd/test0'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
<disk type='block' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hdc' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='1' target='0' unit='0'/>
</disk>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<interface type='network'>
<mac address='52:54:00:8c:e4:92'/>
<source network='default'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memballoon>
</devices>
</domain>
######## END
More information about the libvirt-users
mailing list