[libvirt-users] boot device

[vivek hari]

Hi,

Yes, it failed to boot from hard disk, instead booted from cd.
I made a simple modification to  the domain xml config file attached
before. I replaced "target='xvda' with target='hda'" and removed per boot
option. This time, installation was successful and booted from hd. Since
installation was successful i deleted the iso file, then rebooted the
machine, but it failed with the error.

virsh # start vm-2
error: Failed to start domain vm-2
error: POST operation failed: xend_post: error from xen daemon: (xend.err
'Disk image does not exist: /var/lib/libvirt/images/Rhel53.iso')

I hope this is not the proper behaviour. Below is my config file i used
this time.

<domain type='xen'>
     <name>vm-2</name>
      <memory>1048576</memory>
      <vcpu>1</vcpu>
      <os>
            <type arch='x86_64'>hvm</type>
        <loader>/usr/lib/xen/boot/hvmloader</loader>
            <boot dev='hd' />
            <boot dev='cdrom'/>
      </os>
    <features>
            <acpi/>
            <apic/>
            <pae/>
      </features>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
      <on_crash>restart</on_crash>
    <devices>
            <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
            <disk type='file' device='disk'>
                  <source file='/var/lib/libvirt/images/vm-2.img'/>
                  <target dev='hda' bus='ide' />
            <address type='drive' controller='0' bus='0' target='0'
unit='0'/>
           </disk>
        <disk type='file' device='cdrom'>
                   <source file='/var/lib/libvirt/images/Rhel53.iso'/>
                   <target dev='hdc' bus='ide' />
                   <readonly/>
            <address type='drive' controller='0' bus='1' target='0'
unit='0' />
        </disk>
        <interface type='bridge'>
                  <source bridge='br0'/>
            </interface>
        <graphics type='vnc' port='-1' autoport='yes'/>
      </devices>
</domain>

Similar config file I used on kvm and esxi, i din't face any issue there.
Can you let me know how libvirt sorts the boot device ?

Thanks,
Vivek


On Thu, Sep 6, 2012 at 2:59 PM, Jiri Denemark <jdenemar at redhat.com> wrote:

> On Wed, Sep 05, 2012 at 19:22:27 +0530, vivek hari wrote:
> > Hi,
> >
> > I am trying to create a guest machine on xen virtualized environment and
> > install rhel on it by booting from cdrom.
> > I face a issue in booting device. I gave boot order as hd,cdrom. When
> doing
> > maiden installation, it will find nothing in hard disk and boots from cd.
> > Once installation is completed and when it boots next time it boots from
> > hard disk.  It is the expected behaviour.
> > But it fails to boot from hard disk and again boots from cdrom.
>
> Looks like the real issue is that it fails to boot from hard disk.
>
> > I also tried specifying per boot device option. I specified disk image as
> > boot order 1 and cd image as boot order 2. But when i power on for the
> > first time, it tries to boot from harddisk and finds nothing there and
> says
> > " No bootable device. Going to power off in 30 seconds". But expected is,
> > it should boot from cd after trying hard disk.
>
> Xen driver does not support per-device boot configuration. Which means we
> have
> a bug in libvirt because starting such domain should fail immediately
> because
> of this.
>
> Jirka
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/libvirt-users/attachments/20120906/40286e10/attachment.htm>