[libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
cooldharma06
cooldharma06 at gmail.com
Mon Oct 7 08:28:11 UTC 2013
hi,
i removed all libvirt things form my system and i installed libvirt-0.9.12
frm my repository.
then i installed libvirt-1.1.2 from the source with following commands.
./configure --prefix=/usr --localstatedir=/var --sysconfdir=/etc
--with-xen=yes --with-libxl=yes
make
make install
now its works with XM.
but with xl its not working...
i attached the corresponding screenshots also. kindly refer the attachment.
Regards,
cooldharma06
On Sat, Oct 5, 2013 at 4:20 PM, cooldharma06 <cooldharma06 at gmail.com> wrote:
> hi,
>
> i prepared my xen-4.2.1 document with this mail. kindly refer the below
> attachment.
>
> i installed libvirt 1.1.1 like this it giving the following error:
>
> ./autogen.sh --system --with-xen=yes
> make
> /daemon/libvirtd -d
>
>
> then i checked with the virsh ->version
> virsh # version
> error: failed to connect to the hypervisor
> error: no valid connection
> error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No
> such file or directory
>
> but virsh -version -> 1.1.1
> and also libvirtd --version -> 1.1.1
>
> how to solve the above error.
>
> Small request i found the libvirt but its not active kindly make active
> that one. It will help the beginners.
>
> regards,
> cooldharma06
>
>
> On Fri, Oct 4, 2013 at 9:52 PM, Jim Fehlig <jfehlig at suse.com> wrote:
>
>> cooldharma06 wrote:
>> > hi,
>> >
>> > i found something im my log: (libvirtd.log)
>> >
>> > i dont know about this. but it may be helpful for you. So i am
>> > forwarding this.
>> >
>> > 2013-09-26 11:43:58.507+0000: 10718: error : virDriverLoadModule:78 :
>> > failed to load module
>> > /usr/local/lib/libvirt/connection-driver/libvirt_driver_libxl.so
>> > /usr/lib/libxenlight.so.2.0: undefined symbol: xs_check_watch
>>
>> Seems your libxenlight.so is not linked properly. xs_check_watch is
>> provided by libxenstore, which should be linked with libxenlight
>>
>> # ldd /usr/lib64/libxenlight.so.4.3 | grep libxenstore
>> libxenstore.so.3.0 => /usr/lib64/libxenstore.so.3.0 (0x00007faa807a5000)
>>
>> As Dario mentioned elsewhere in this thread, you need to tell how you
>> "installed" Xen 4.2.1 from source. Perhaps it is not
>> configured/built/installed properly.
>>
>> Regards,
>> Jim
>>
>> > 2013-09-26 11:43:58.790+0000: 10729: error : virCommandWait:2348 :
>> > internal error: Child process (LC_ALL=C
>> > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>> > HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device
>> > '?' -device 'pci-assign,?' -device 'virtio-blk-pci,?' -device
>> > 'virtio-net-pci,?' -device 'scsi-disk,?' -device 'PIIX4_PM,?' -device
>> > 'usb-redir,?' -device 'ide-drive,?' -device 'usb-host,?' -device
>> > 'scsi-generic,?') unexpected exit status 1: Could not access KVM
>> > kernel module: No such file or directory
>> > failed to initialize KVM: No such file or directory
>> > No accelerator found!
>> >
>> > 2013-09-26 11:43:58.838+0000: 10729: error : virCommandWait:2348 :
>> > internal error: Child process (LC_ALL=C
>> > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>> > HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device
>> > '?' -device 'pci-assign,?' -device 'virtio-blk-pci,?' -device
>> > 'virtio-net-pci,?' -device 'scsi-disk,?' -device 'PIIX4_PM,?' -device
>> > 'usb-redir,?' -device 'ide-drive,?' -device 'usb-host,?' -device
>> > 'scsi-generic,?') unexpected exit status 1: Could not access KVM
>> > kernel module: No such file or directory
>> > failed to initialize KVM: No such file or directory
>> > No accelerator found!
>> >
>> > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011
>> > : Unable to issue hypervisor ioctl 3166208: Permission denied
>> > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011
>> > : Unable to issue hypervisor ioctl 3166208: Permission denied
>> > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011
>> > : Unable to issue hypervisor ioctl 3166208: Permission denied
>> > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011
>> > : Unable to issue hypervisor ioctl 3166208: Permission denied
>> > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011
>> > : Unable to issue hypervisor ioctl 3166208: Permission denied
>> > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011
>> > : Unable to issue hypervisor ioctl 3166208: Permission denied
>> >
>> > *********
>> > suggest me some solutions.
>> >
>> > Regards,
>> > cooldharma06
>> >
>> >
>> >
>> >
>> > On Mon, Sep 30, 2013 at 6:36 PM, cooldharma06 <cooldharma06 at gmail.com
>> > <mailto:cooldharma06 at gmail.com>> wrote:
>> >
>> > hi,
>> >
>> > i am using debian flavor called BOSS.
>> >
>> > *uname -a*
>> > Linux boss 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64 GNU/Linux
>> >
>> > i installed XEN-4.2.1 from the source.
>> >
>> > *virsh # version*
>> > error: failed to connect to the hypervisor
>> > error: no valid connection
>> > error: Failed to connect socket to
>> > '/usr/local/var/run/libvirt/libvirt-sock': No such file or directory
>> > *
>> > *
>> > *root at boss[src]#libvirtd -v*
>> > 2013-09-30 13:05:36.836+0000: 8199: info : libvirt version: 1.1.2
>> > 2013-09-30 13:05:36.836+0000: 8199: error : libxlCapsInitHost:86 :
>> > internal error: Failed to get node physical info from libxenlight
>> > 2013-09-30 13:05:36.836+0000: 8199: error :
>> > libxlStateInitialize:1362 : cannot create capabilities for
>> libxenlight
>> > 2013-09-30 13:05:36.836+0000: 8199: error : virStateInitialize:840
>> > : Initialization of LIBXL state driver failed: internal error:
>> > Failed to get node physical info from libxenlight
>> > 2013-09-30 13:05:36.836+0000: 8199: error : daemonRunStateInit:909
>> > : Driver state initialization failed
>> >
>> >
>> > *root at boss[src]#libvirtd --version*
>> > /opt/libvirt-1.1.2/daemon/.libs/lt-libvirtd (libvirt) 1.1.2
>> >
>> > these are the things which is in my system.
>> >
>> > Regards,
>> > cooldharma06.
>> >
>> >
>> >
>> > On Mon, Sep 30, 2013 at 4:23 PM, Dario Faggioli
>> > <dario.faggioli at citrix.com <mailto:dario.faggioli at citrix.com>>
>> wrote:
>> >
>> > On lun, 2013-09-30 at 11:27 +0530, cooldharma06 wrote:
>> > > hi,
>> > >
>> > Hi,
>> >
>> > > thanks for your response.
>> > >
>> > >
>> > > i cleaned that above one and installed in this following
>> steps:
>> > >
>> > >
>> > > * sudo apt-get install gcc make pkg-config libxml2-dev
>> > libgnutils-dev
>> > > libdevmapper-dev libcurl4-gnutls-dev python-dev
>> libpciaccess-dev
>> > > libxen-dev libnl-dev
>> > >
>> > Oh, so you are on Debian/Ubuntu... Which version (so that I
>> > can try to
>> > replicate your configuration) ?
>> >
>> > > * ./configure = --prefix=/usr --localstatedir=/var
>> > --sysconfdir=/etc
>> > > --with-xen=yes --with-libxl=yes
>> > >
>> > Mmm... ok, that's the libvirt part. How did you install Xen?
>> > I'm sure I
>> > asked that already, but I can't remember whether or no you
>> > answered (if
>> > yes, sorry).
>> >
>> > Last time I tired to compile libvirt with libxl=yes on a
>> > Debian system
>> > it was failing because of some issues with the Xen Debian
>> > packages (or
>> > so I recall), although that was with Xen 4.3.0.
>> >
>> > So, did you also build Xen yourself or you apt-get installed it?
>> >
>> > > root at boss[daemon]#xl info -n
>> > > host : boss
>> > > release : 3.2.0-4-amd64
>> > > version : #1 SMP Debian 3.2.41-2
>> > > machine : x86_64
>> > > nr_cpus : 8
>> > > max_cpu_id : 7
>> > > nr_nodes : 1
>> > > cores_per_socket : 4
>> > > threads_per_core : 2
>> > > cpu_mhz : 3392
>> > > hw_caps :
>> > >
>> >
>> bfebfbff:28100800:00000000:00007f40:77bae3ff:00000000:00000001:00000281
>> > > virt_caps : hvm
>> > > total_memory : 3970
>> > > free_memory : 442
>> > > sharing_freed_memory : 0
>> > > sharing_used_memory : 0
>> > > free_cpus : 0
>> > > cpu_topology :
>> > > cpu: core socket node
>> > > 0: 0 0 0
>> > > 1: 0 0 0
>> > > 2: 1 0 0
>> > > 3: 1 0 0
>> > > 4: 2 0 0
>> > > 5: 2 0 0
>> > > 6: 3 0 0
>> > > 7: 3 0 0
>> > > numa_info :
>> > > node: memsize memfree distances
>> > > 0: 4590 442 10
>> > > xen_major : 4
>> > > xen_minor : 2
>> > > xen_extra : .1
>> > >
>> > Mmm... I have to admit that the most of the testing I did when
>> > working
>> > on the patch for libvirt that introduced the call to
>> > libxl_get_physinfo() that is failing, happened on Xen 4.3, but
>> > I'm sure
>> > I tested it with 4.2 a couple of times, and I don't see why it
>> > wouldn't
>> > work there...
>> >
>> > If you tell me the precise version of the distro you're using
>> > I'll see
>> > if I can give it a try.
>> >
>> > Regards,
>> > Dario
>> >
>> > --
>> > <<This happens because I choose it to happen!>> (Raistlin
>> Majere)
>> >
>> -----------------------------------------------------------------
>> > Dario Faggioli, Ph.D, http://about.me/dario.faggioli
>> > Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge
>> (UK)
>> >
>> >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/libvirt-users/attachments/20131007/f8cfdec5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: error_when_check_withoutXEND.png
Type: image/png
Size: 90242 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/libvirt-users/attachments/20131007/f8cfdec5/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: with_Xend_working.png
Type: image/png
Size: 89104 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/libvirt-users/attachments/20131007/f8cfdec5/attachment-0001.png>
More information about the libvirt-users
mailing list