[libvirt-users] libvirt and glusterfs integrate problem

[lyz_pro]

Hi everyone

I have a problem when use libvirt and glusterfs. 
When I use libvirt to start a vm with glusterfs disk. the operation will block.
after I `CTL + c` the 'virsh start domainxx' comand ,
I use `virsh list` will find the vm in a strange state, kind like follow:
 Id    Name                           State
----------------------------------------------------
 20    vm10                           shut off 
and I when I start the vm again, It will promote the vm is in active.

the xml as follow (172.16.32.16 is a glusterfs node):
<domain type='kvm' id='20'>
  <name>vm10</name>
  <uuid>12208c14-3990-c134-2653-8a828ff1eb1d</uuid>
  <memory unit='KiB'>1048576</memory>
  <currentMemory unit='KiB'>1048576</currentMemory>
  <vcpu placement='static'>4</vcpu>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch='x86_64' machine='rhel6.5.0'>hvm</type>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <pae/>
  </features>
  <clock offset='localtime'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/libexec/qemu-kvm</emulator>
    <disk type='network' device='disk'>
      <driver name='qemu' type='qcow2'/>
      <source protocol='gluster' name='h2216v5/tmp/vm10.img'>
        <host name='172.16.32.16'/>
      </source>
      <target dev='hda' bus='ide'/>
      <alias name='ide0-0-0'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <controller type='usb' index='0'>
      <alias name='usb0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='ide' index='0'>
      <alias name='ide0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='0' model='pci-root'>
      <alias name='pci.0'/>
    </controller>
    <interface type='bridge'>
      <mac address='00:0c:29:2f:aa:b1'/>
      <source bridge='virbr0'/>
      <target dev='vnet91'/>
      <model type='rtl8139'/>
      <alias name='net0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <input type='mouse' bus='ps2'/>
    <graphics type='vnc' port='5991' autoport='yes' listen='172.16.32.3' keymap='en-us'>
      <listen type='address' address='172.16.32.3'/>
    </graphics>
    <video>
      <model type='cirrus' vram='9216' heads='1'/>
      <alias name='video0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <alias name='balloon0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </memballoon>
  </devices>
  <seclabel type='none'/>
</domain>


Also:
I can use `qemu-kvm` command to start vm successful with gluster://172.16.32.16
I have stop both nodes' iptables. and my libvirt and qemu version is :
Compiled against library: libvirt 1.1.4
Using library: libvirt 1.1.4
Using API: QEMU 1.1.4
Running hypervisor: QEMU 1.6.2
glusterfs-3.4.1-3.el6.x86_64			
--------------
lyz_pro
2014-04-14