[libvirt-users] LIBVIRT-4.6.0 can't work with QEMU 3.0.0

Daniel P. Berrangé berrange at redhat.com
Wed Aug 8 09:06:12 UTC 2018


On Wed, Aug 08, 2018 at 10:58:50AM +0200, Holger Schranz wrote:

> checking for JANSSON... no

This is the problem. In 4.6.0 we just switched to using JANSSOn instead
of yajl for JSON parsing. Your host doesn't have the development headers
installed for jansson....


> configure: 
> configure: Configuration summary
> configure: =====================
> configure: 
> configure: Drivers
> configure: 
> configure:       QEMU: no

so the QEMU driver was not built. 

There's a bunch of other "no" in the summary below you should consider
whether you need any of them,

> configure:        UML: yes
> configure:     OpenVZ: yes
> configure:     VMware: yes
> configure:       VBox: yes
> configure:     XenAPI: no 
> configure:      libxl: no 
> configure:        LXC: yes
> configure:       PHYP: no 
> configure:        ESX: yes
> configure:    Hyper-V: no 
> configure:         vz: no 
> configure:      Bhyve: no 
> configure:       Test: yes
> configure:     Remote: yes
> configure:    Network: yes
> configure:   Libvirtd: yes
> configure:  Interface: yes
> configure: 
> configure: Storage Drivers
> configure: 
> configure:        Dir: yes
> configure:         FS: yes
> configure:      NetFS: yes
> configure:        LVM: yes
> configure:      iSCSI: yes
> configure:       SCSI: yes
> configure:      mpath: yes
> configure:       Disk: no 
> configure:        RBD: no 
> configure:   Sheepdog: no 
> configure:    Gluster: no 
> configure:        ZFS: no 
> configure: Virtuozzo storage: no 
> configure: 
> configure: Security Drivers
> configure: 
> configure:    SELinux: yes
> configure:   AppArmor: no 
> configure: 
> configure: Driver Loadable Modules
> configure: 
> configure: driver_modules: yes (CFLAGS='' LIBS='-ldl')
> configure: 
> configure: Libraries
> configure: 
> configure:        acl: no 
> configure:   apparmor: no 
> configure:       attr: yes (CFLAGS='' LIBS='-lattr')
> configure:      audit: no 
> configure:      avahi: yes (CFLAGS='-D_REENTRANT ' LIBS='-lavahi-common -lavahi-client ')
> configure: bash_completion: yes (CFLAGS='' LIBS='')
> configure:      blkid: yes (CFLAGS='-I/usr/include/blkid -I/usr/include/uuid ' LIBS='-lblkid ')
> configure:      capng: no 
> configure:       curl: yes (CFLAGS='-DCURL_DISABLE_TYPECHECK ' LIBS='-lcurl ')
> configure:       dbus: yes (CFLAGS='-I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include ' LIBS='-ldbus-1 ')
> configure:     dlopen: yes (CFLAGS='' LIBS='-ldl')
> configure:  firewalld: yes (CFLAGS='' LIBS='')
> configure:       fuse: no 
> configure:  glusterfs: no 
> configure:     gnutls: yes (CFLAGS='-I/usr/include/p11-kit-1 ' LIBS='-lgnutls ')
> configure:        hal: no 
> configure:    jansson: no 
> configure:      libnl: yes (CFLAGS='' LIBS='-lnl ')
> configure:    libpcap: no 
> configure:     libssh: no 
> configure:      libxl: no 
> configure:     libxml: yes (CFLAGS='-I/usr/include/libxml2 ' LIBS='-lxml2 ')
> configure:    macvtap: yes (CFLAGS='' LIBS='')
> configure:      netcf: no 
> configure:        NLS: yes
> configure:        nss: no 
> configure:    numactl: no 
> configure:  openwsman: no 
> configure:  pciaccess: yes (CFLAGS='' LIBS='-lpciaccess ')
> configure:   pm_utils: no 
> configure:     polkit: yes
> configure:        rbd: no 
> configure:   readline: yes (CFLAGS='-D_FUNCTION_DEF ' LIBS='-lreadline')
> configure:    sanlock: no 
> configure:       sasl: yes (CFLAGS='' LIBS='-lsasl2')
> configure:    selinux: yes (CFLAGS='' LIBS='-lselinux')
> configure:       ssh2: no 
> configure:       udev: yes (CFLAGS='' LIBS='-ludev ')
> configure: virtualport: yes (CFLAGS='' LIBS='')
> configure:        xdr: yes (CFLAGS='' LIBS='')
> configure:     xenapi: no 
> configure:       yajl: no 
> configure: 
> configure: Windows
> configure: 
> configure:     Cygwin: no 
> configure:      MinGW: no 
> configure:       MSVC: no 
> configure:    windres: no 
> configure: 
> configure: Test suite
> configure: 
> configure:          Coverage: no
> configure:         Alloc OOM: no
> configure: 
> configure: Miscellaneous
> configure: 
> configure:              Debug: yes
> configure:        Use -Werror: no
> configure:      Warning Flags:  -fno-common -W -Waddress -Waggressive-loop-optimizations -Wall -Wattributes -Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wclobbered -Wcomment -Wcomments -Wcoverage-mismatch -Wcpp -Wdeprecated-declarations -Wdiv-by-zero -Wdouble-promotion -Wempty-body -Wendif-labels -Wextra -Wformat-contains-nul -Wformat-extra-args -Wformat-security -Wformat-y2k -Wformat-zero-length -Wfree-nonheap-object -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast -Winvalid-memory-model -Winvalid-pch -Wlogical-op -Wmain -Wmaybe-uninitialized -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-include-dirs -Wmissing-parameter-type -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wold-style-declaration -Wold-style-definition -Woverflow -Woverride-init -Wpacked-bitfield-compat -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wpragmas -Wpsabi -Wreturn-local-addr -Wreturn-type -Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wsuggest-attribute=const -Wsuggest-attribute=format -Wsuggest-attribute=noreturn -Wsuggest-attribute=pure -Wswitch -Wsync-nand -Wtrampolines -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-but-set-parameter -Wunused-but-set-variable -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvarargs -Wvariadic-macros -Wvector-operation-performance -Wvolatile-register-var -Wwrite-strings -Wnormalized=nfc -Wno-sign-compare -Wjump-misses-init -Wswitch-enum -Wno-format-nonliteral -fexceptions -fasynchronous-unwind-tables -fipa-pure-const -Wno-suggest-attribute=pure -Wno-suggest-attribute=const -fstack-protector-all
> configure:             DTrace: no
> configure:              numad: no
> configure:        Init script: systemd
> configure:  Char device locks: /var/lock
> configure:     Default Editor: vi
> configure:       Loader/NVRAM: 
> configure:   virt-login-shell: yes
> configure: virt-host-validate: yes
> configure:       TLS priority: NORMAL
> configure: 
> configure: Developer Tools
> configure: 
> configure: wireshark_dissector: no 
> configure: 
> configure: Privileges
> configure: 
> configure:       QEMU: root:root
> configure: 

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|




More information about the libvirt-users mailing list