[libvirt-users] LIBVIRT-4.6.0 can't work with QEMU 3.0.0

[Holger Schranz]

Hi Daniel,

thank you very much. I will update the configuration and the environment.

Best regards

Holger

Am 08.08.2018 um 11:06 schrieb Daniel P. Berrangé:
> On Wed, Aug 08, 2018 at 10:58:50AM +0200, Holger Schranz wrote:
>
>> checking for JANSSON... no
> This is the problem. In 4.6.0 we just switched to using JANSSOn instead
> of yajl for JSON parsing. Your host doesn't have the development headers
> installed for jansson....
>
>
>> configure:
>> configure: Configuration summary
>> configure: =====================
>> configure:
>> configure: Drivers
>> configure:
>> configure:       QEMU: no
> so the QEMU driver was not built.
>
> There's a bunch of other "no" in the summary below you should consider
> whether you need any of them,
>
>> configure:        UML: yes
>> configure:     OpenVZ: yes
>> configure:     VMware: yes
>> configure:       VBox: yes
>> configure:     XenAPI: no
>> configure:      libxl: no
>> configure:        LXC: yes
>> configure:       PHYP: no
>> configure:        ESX: yes
>> configure:    Hyper-V: no
>> configure:         vz: no
>> configure:      Bhyve: no
>> configure:       Test: yes
>> configure:     Remote: yes
>> configure:    Network: yes
>> configure:   Libvirtd: yes
>> configure:  Interface: yes
>> configure:
>> configure: Storage Drivers
>> configure:
>> configure:        Dir: yes
>> configure:         FS: yes
>> configure:      NetFS: yes
>> configure:        LVM: yes
>> configure:      iSCSI: yes
>> configure:       SCSI: yes
>> configure:      mpath: yes
>> configure:       Disk: no
>> configure:        RBD: no
>> configure:   Sheepdog: no
>> configure:    Gluster: no
>> configure:        ZFS: no
>> configure: Virtuozzo storage: no
>> configure:
>> configure: Security Drivers
>> configure:
>> configure:    SELinux: yes
>> configure:   AppArmor: no
>> configure:
>> configure: Driver Loadable Modules
>> configure:
>> configure: driver_modules: yes (CFLAGS='' LIBS='-ldl')
>> configure:
>> configure: Libraries
>> configure:
>> configure:        acl: no
>> configure:   apparmor: no
>> configure:       attr: yes (CFLAGS='' LIBS='-lattr')
>> configure:      audit: no
>> configure:      avahi: yes (CFLAGS='-D_REENTRANT ' LIBS='-lavahi-common -lavahi-client ')
>> configure: bash_completion: yes (CFLAGS='' LIBS='')
>> configure:      blkid: yes (CFLAGS='-I/usr/include/blkid -I/usr/include/uuid ' LIBS='-lblkid ')
>> configure:      capng: no
>> configure:       curl: yes (CFLAGS='-DCURL_DISABLE_TYPECHECK ' LIBS='-lcurl ')
>> configure:       dbus: yes (CFLAGS='-I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include ' LIBS='-ldbus-1 ')
>> configure:     dlopen: yes (CFLAGS='' LIBS='-ldl')
>> configure:  firewalld: yes (CFLAGS='' LIBS='')
>> configure:       fuse: no
>> configure:  glusterfs: no
>> configure:     gnutls: yes (CFLAGS='-I/usr/include/p11-kit-1 ' LIBS='-lgnutls ')
>> configure:        hal: no
>> configure:    jansson: no
>> configure:      libnl: yes (CFLAGS='' LIBS='-lnl ')
>> configure:    libpcap: no
>> configure:     libssh: no
>> configure:      libxl: no
>> configure:     libxml: yes (CFLAGS='-I/usr/include/libxml2 ' LIBS='-lxml2 ')
>> configure:    macvtap: yes (CFLAGS='' LIBS='')
>> configure:      netcf: no
>> configure:        NLS: yes
>> configure:        nss: no
>> configure:    numactl: no
>> configure:  openwsman: no
>> configure:  pciaccess: yes (CFLAGS='' LIBS='-lpciaccess ')
>> configure:   pm_utils: no
>> configure:     polkit: yes
>> configure:        rbd: no
>> configure:   readline: yes (CFLAGS='-D_FUNCTION_DEF ' LIBS='-lreadline')
>> configure:    sanlock: no
>> configure:       sasl: yes (CFLAGS='' LIBS='-lsasl2')
>> configure:    selinux: yes (CFLAGS='' LIBS='-lselinux')
>> configure:       ssh2: no
>> configure:       udev: yes (CFLAGS='' LIBS='-ludev ')
>> configure: virtualport: yes (CFLAGS='' LIBS='')
>> configure:        xdr: yes (CFLAGS='' LIBS='')
>> configure:     xenapi: no
>> configure:       yajl: no
>> configure:
>> configure: Windows
>> configure:
>> configure:     Cygwin: no
>> configure:      MinGW: no
>> configure:       MSVC: no
>> configure:    windres: no
>> configure:
>> configure: Test suite
>> configure:
>> configure:          Coverage: no
>> configure:         Alloc OOM: no
>> configure:
>> configure: Miscellaneous
>> configure:
>> configure:              Debug: yes
>> configure:        Use -Werror: no
>> configure:      Warning Flags:  -fno-common -W -Waddress -Waggressive-loop-optimizations -Wall -Wattributes -Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wclobbered -Wcomment -Wcomments -Wcoverage-mismatch -Wcpp -Wdeprecated-declarations -Wdiv-by-zero -Wdouble-promotion -Wempty-body -Wendif-labels -Wextra -Wformat-contains-nul -Wformat-extra-args -Wformat-security -Wformat-y2k -Wformat-zero-length -Wfree-nonheap-object -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast -Winvalid-memory-model -Winvalid-pch -Wlogical-op -Wmain -Wmaybe-uninitialized -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-include-dirs -Wmissing-parameter-type -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wold-style-declaration -Wold-style-definition -Woverflow -Woverride-init -Wpacked-bitfield-compat -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wpragmas -Wpsabi -Wreturn-local-addr -Wreturn-type -Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wsuggest-attribute=const -Wsuggest-attribute=format -Wsuggest-attribute=noreturn -Wsuggest-attribute=pure -Wswitch -Wsync-nand -Wtrampolines -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-but-set-parameter -Wunused-but-set-variable -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvarargs -Wvariadic-macros -Wvector-operation-performance -Wvolatile-register-var -Wwrite-strings -Wnormalized=nfc -Wno-sign-compare -Wjump-misses-init -Wswitch-enum -Wno-format-nonliteral -fexceptions -fasynchronous-unwind-tables -fipa-pure-const -Wno-suggest-attribute=pure -Wno-suggest-attribute=const -fstack-protector-all
>> configure:             DTrace: no
>> configure:              numad: no
>> configure:        Init script: systemd
>> configure:  Char device locks: /var/lock
>> configure:     Default Editor: vi
>> configure:       Loader/NVRAM:
>> configure:   virt-login-shell: yes
>> configure: virt-host-validate: yes
>> configure:       TLS priority: NORMAL
>> configure:
>> configure: Developer Tools
>> configure:
>> configure: wireshark_dissector: no
>> configure:
>> configure: Privileges
>> configure:
>> configure:       QEMU: root:root
>> configure:
> Regards,
> Daniel



---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus