[Linux-cluster] having problems trying to setup a two node cluster

[vahram]

this did the trick...thanks!

Rick Stevens wrote:
> Looking back at your cluster.conf, I see you're using broadcast.  I used
> multicast because, in the first CVS checkout I did, broadcast didn't
> work properly.  It's possible your SRPMs also have that flaw.  Why not
> try multicast and see if that works.  Add that route I mentioned and
> here's my cluster.conf which you can crib:
> 
> <?xml version="1.0"?>
> <cluster name="test" config_version="1">
> 
> 
>     <cman two-node="1" expected_votes="1">
>         <multicast addr="224.0.0.1"/>
>     </cman>
> 
> 
>     <nodes>
>         <node name="gfs-01-001" votes="1">
>             <multicast addr="224.0.0.1" interface="eth1"/>
>             <fence>
>                 <method name="single">
>                     <device name="human" ipaddr="gfs-01-001"/>
>                 </method>
>             </fence>
>         </node>
> 
> 
>         <node name="gfs-01-002" votes="1">
>             <multicast addr="224.0.0.1" interface="eth1"/>
>             <fence>
>                 <method name="single">
>                     <device name="human" ipaddr="gfs-01-002"/>
>                 </method>
>             </fence>
>         </node>
>     </nodes>
> 
> 
>     <fence_devices>
>         <device name="human" agent="fence_manual"/>
>     </fence_devices>
> </cluster>
> 
> ----------------------------------------------------------------------
> - Rick Stevens, Senior Systems Engineer     rstevens at vitalstream.com -
> - VitalStream, Inc.                       http://www.vitalstream.com -
> -                                                                    -
> -  What's small, yellow and very, VERY dangerous?  The root canary!  -
> ----------------------------------------------------------------------
> 
> -- 
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> http://www.redhat.com/mailman/listinfo/linux-cluster