[Linux-cluster] Re: GNBD configuration

[Weikuan Yu]

I finally figured out this. It is because of my network configuration errors.

Weikuan

Weikuan Yu wrote:
> Hi,
> 
> I recently want to update from GFS6.0 to GFS6.1. I have not yet been 
> successful in creating a GNBD-based small configuration.
> 
> I used the following cluster.conf on node15,node16,node22.
> # cat /etc/cluster/cluster.conf
> <?xml version="1.0"?>
> <cluster name="y2gfs" config_version="1">
> <cman two_node="1" expected_votes="1"> </cman>
> <clusternodes>
> 
> <clusternode name="node15"> <fence> <method name="single"> <device 
> name="gnbd" ipaddr="node15"/> </method>
> </fence> </clusternode>
> 
> <clusternode name="node16"> <fence> <method name="single"> <device 
> name="gnbd" ipaddr="node16"/> </method>
> </fence> </clusternode>
> </clusternodes>
> 
> <fencedevices>
>         <fencedevice name="gnbd" agent="fence_gnbd" servers="node22"/>
> </fencedevices>
> </cluster>
> 
> 
> After loading all the modules, I try to run these commands:
> ccsd
> cman_tool join
> fence_tool join
> clvmd
> 
> I have the following problems.
>  -- not able to have node22 join the cluster manager.
>  -- Not able to complete this command for node16
>     # fence_tool join
> 
> [root at node22 cluster-RHEL4]# cman_tool join
> cman_tool: local node name "node22" not found in cluster.conf
> 
> Can anybody share some insights here? I have been trying different steps 
> for a while to no successes. Let me know if I need to be more clear on 
> some specifics.
> 
> Many thanks in advance,
> 
> Weikuan
>