[Linux-cluster] dont relocate service after node begin fenced
Juliano Rodrigues
julianorodrigues at mac.com
Mon Feb 18 20:54:49 UTC 2008
While testing RHEL 5.1 to suit my needs (simple samba 2 nodes
failover) Im running into this issue.
When poweroff node that service is running cluster dont relocate
service to another node.
If killall smbd, cluster detects that samba dies and relocate properly
to another node.
Conga display Unknown node state for that node poweroff, but still
displaying that service is active/running in this node (powered off
node)???
Cheers, Juliano.
Feb 18 15:17:05 node2 openais[1982]: [CLM ] CLM CONFIGURATION CHANGE
Feb 18 15:17:05 node2 openais[1982]: [CLM ] New Configuration:
Feb 18 15:17:05 node2 openais[1982]: [CLM ] r(0) ip(10.0.0.2)
Feb 18 15:17:05 node2 openais[1982]: [CLM ] Members Left:
Feb 18 15:17:05 node2 openais[1982]: [CLM ] Members Joined:
Feb 18 15:17:05 node2 openais[1982]: [SYNC ] This node is within the
primary component and will provide service.
Feb 18 15:17:05 node2 fence_manual: Node node1.cluster needs to be
reset before recovery can procede. Waiting for node1.cluster to
rejoin the cluster or for manual acknowledgement that it has been
reset (i.e. fence_ack_manual -n node1.cluster)
Feb 18 15:17:05 node2 openais[1982]: [TOTEM] entering OPERATIONAL state.
Feb 18 15:17:05 node2 openais[1982]: [CLM ] got nodejoin message
10.0.0.2
Feb 18 15:17:05 node2 openais[1982]: [CPG ] got joinlist message from
node 2
<?xml version="1.0"?>
<cluster alias="CAMPIXCLU" config_version="22" name="CAMPIXCLU">
<fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
<clusternodes>
<clusternode name="node1.cluster" nodeid="1" votes="1">
<fence>
<method name="1">
<device name="node1"
nodename="node1.cluster"/>
</method>
</fence>
</clusternode>
<clusternode name="node2.cluster" nodeid="2" votes="1">
<fence>
<method name="1">
<device name="node2"
nodename="node2.cluster"/>
</method>
</fence>
</clusternode>
</clusternodes>
<cman expected_votes="1" two_node="1"/>
<fencedevices>
<fencedevice agent="fence_manual" name="node1"/>
<fencedevice agent="fence_manual" name="node2"/>
</fencedevices>
<rm>
<failoverdomains>
<failoverdomain name="sambaha" ordered="1"
restricted="1">
<failoverdomainnode
name="node1.cluster" priority="2"/>
<failoverdomainnode
name="node2.cluster" priority="1"/>
</failoverdomain>
</failoverdomains>
<resources/>
<service autostart="1" domain="sambaha" exclusive="0"
name="samba00" recovery="relocate">
<smb name="vendas" workgroup="CAMPIX">
<ip address="10.0.0.10/24"
monitor_link="1"/>
</smb>
</service>
</rm>
</cluster>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20080218/fc4f21b1/attachment.htm>
More information about the Linux-cluster
mailing list