[Linux-cluster] openais issue
Daniela Anzellotti
daniela.anzellotti at roma1.infn.it
Mon Oct 5 12:19:17 UTC 2009
Hi all,
I had a problem similar to Paras's one today: yum updated the following
rpms last week and today (I had to restart the cluster) the cluster was
not able to start vm: services.
Oct 02 05:31:05 Updated: openais-0.80.6-8.el5.x86_64
Oct 02 05:31:07 Updated: cman-2.0.115-1.el5.x86_64
Oct 02 05:31:10 Updated: rgmanager-2.0.52-1.el5.x86_64
Oct 03 04:03:12 Updated: xen-libs-3.0.3-94.el5_4.1.x86_64
Oct 03 04:03:12 Updated: xen-libs-3.0.3-94.el5_4.1.i386
Oct 03 04:03:16 Updated: xen-3.0.3-94.el5_4.1.x86_64
So, after checked the vm.sh script, I add the declaration use_virsh="0"
in the VM definition in the cluster.conf (as suggested by Brem, thanks!)
and everything is now working again.
BTW I didn't understand if the problem was caused by the new XEN version
or the new openais one, thus I disabled automatic updates for both.
I hope I'll not have any other bad surprise...
Thank you,
cheers,
Daniela
Paras pradhan wrote:
> Yes this is very strange. I don't know what to do now. May be re
> create the cluster? But not a good solution actually.
>
> Packages :
>
> Kernel: kernel-xen-2.6.18-164.el5
> OS: Full updated of CentOS 5.3 except CMAN downgraded to cman-2.0.98-1.el5
>
> Other packages related to cluster suite:
>
> rgmanager-2.0.52-1.el5.centos
> cman-2.0.98-1.el5
> xen-3.0.3-80.el5_3.3
> xen-libs-3.0.3-80.el5_3.3
> kmod-gfs-xen-0.1.31-3.el5_3.1
> kmod-gfs-xen-0.1.31-3.el5_3.1
> kmod-gfs-0.1.31-3.el5_3.1
> gfs-utils-0.1.18-1.el5
> gfs2-utils-0.1.62-1.el5
> lvm2-2.02.40-6.el5
> lvm2-cluster-2.02.40-7.el5
> openais-0.80.3-22.el5_3.9
>
> Thanks!
> Paras.
>
>
>
>
> On Wed, Sep 30, 2009 at 10:02 AM, brem belguebli
> <brem.belguebli at gmail.com> wrote:
>> Hi Paras,
>>
>> Your cluster.conf file seems correct. If it is not a ntp issue, I
>> don't see anything except a bug that causes this, or some prerequisite
>> that is not respected.
>>
>> May be you could post the versions (os, kernel, packages etc...) you
>> are using, someone may have hit the same issue with your versions.
>>
>> Brem
>>
>> 2009/9/30, Paras pradhan <pradhanparas at gmail.com>:
>>> All of the nodes are synced with ntp server. So this is not the case with me.
>>>
>>> Thanks
>>> Paras.
>>>
>>> On Tue, Sep 29, 2009 at 6:29 PM, Johannes Rußek
>>> <johannes.russek at io-consulting.net> wrote:
>>>> make sure the time on the nodes is in sync, apparently when a node has too
>>>> much offset, you won't see rgmanager (even though the process is running).
>>>> this happened today and setting the time fixed it for me. afaicr there was
>>>> no sign of this in the logs though.
>>>> johannes
>>>>
>>>> Paras pradhan schrieb:
>>>>> I don't see rgmanager .
>>>>>
>>>>> Here is the o/p from clustat
>>>>>
>>>>> [root at cvtst1 cluster]# clustat
>>>>> Cluster Status for test @ Tue Sep 29 15:53:33 2009
>>>>> Member Status: Quorate
>>>>>
>>>>> Member Name ID
>>>>> Status
>>>>> ------ ---- ----
>>>>> ------
>>>>> cvtst2 1 Online
>>>>> cvtst1 2 Online,
>>>>> Local
>>>>> cvtst3 3 Online
>>>>>
>>>>>
>>>>> Thanks
>>>>> Paras.
>>>>>
>>>>> On Tue, Sep 29, 2009 at 3:44 PM, brem belguebli
>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>
>>>>>> It looks correct, rgmanager seems to start on all nodes
>>>>>>
>>>>>> what gives you clustat ?
>>>>>>
>>>>>> If rgmanager doesn't show, check out the logs something may have gone
>>>>>> wrong.
>>>>>>
>>>>>>
>>>>>> 2009/9/29 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>
>>>>>>> Change to 7 and i got this log
>>>>>>>
>>>>>>> Sep 29 15:33:50 cvtst1 rgmanager: [23295]: <notice> Shutting down
>>>>>>> Cluster Service Manager...
>>>>>>> Sep 29 15:33:50 cvtst1 clurgmgrd[22869]: <notice> Shutting down
>>>>>>> Sep 29 15:33:50 cvtst1 clurgmgrd[22869]: <notice> Shutting down
>>>>>>> Sep 29 15:33:50 cvtst1 clurgmgrd[22869]: <notice> Shutdown complete,
>>>>>>> exiting
>>>>>>> Sep 29 15:33:50 cvtst1 rgmanager: [23295]: <notice> Cluster Service
>>>>>>> Manager is stopped.
>>>>>>> Sep 29 15:33:51 cvtst1 clurgmgrd[23324]: <notice> Resource Group
>>>>>>> Manager Starting
>>>>>>> Sep 29 15:33:51 cvtst1 clurgmgrd[23324]: <info> Loading Service Data
>>>>>>> Sep 29 15:33:51 cvtst1 clurgmgrd[23324]: <debug> Loading Resource Rules
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 21 rules loaded
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> Building Resource Trees
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 0 resources defined
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> Loading Failover
>>>>>>> Domains
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 1 domains defined
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 1 events defined
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> Initializing Services
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> Services Initialized
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> Event: Port Opened
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> State change: Local UP
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> State change: cvtst2 UP
>>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> State change: cvtst3 UP
>>>>>>> Sep 29 15:33:57 cvtst1 clurgmgrd[23324]: <debug> Event (1:2:1) Processed
>>>>>>> Sep 29 15:33:57 cvtst1 clurgmgrd[23324]: <debug> Event (0:1:1) Processed
>>>>>>> Sep 29 15:33:57 cvtst1 clurgmgrd[23324]: <debug> Event (0:3:1) Processed
>>>>>>> Sep 29 15:34:02 cvtst1 clurgmgrd[23324]: <debug> 3 events processed
>>>>>>>
>>>>>>>
>>>>>>> Anything unusual here?
>>>>>>>
>>>>>>> Paras.
>>>>>>>
>>>>>>> On Tue, Sep 29, 2009 at 11:51 AM, brem belguebli
>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>
>>>>>>>> I use log_level=7 to have more debugging info.
>>>>>>>>
>>>>>>>> It seems 4 is not enough.
>>>>>>>>
>>>>>>>> Brem
>>>>>>>>
>>>>>>>>
>>>>>>>> 2009/9/29, Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>
>>>>>>>>> Withe log_level of 3 I got only this
>>>>>>>>>
>>>>>>>>> Sep 29 10:31:31 cvtst1 rgmanager: [7170]: <notice> Shutting down
>>>>>>>>> Cluster Service Manager...
>>>>>>>>> Sep 29 10:31:31 cvtst1 clurgmgrd[6673]: <notice> Shutting down
>>>>>>>>> Sep 29 10:31:41 cvtst1 clurgmgrd[6673]: <notice> Shutdown complete,
>>>>>>>>> exiting
>>>>>>>>> Sep 29 10:31:41 cvtst1 rgmanager: [7170]: <notice> Cluster Service
>>>>>>>>> Manager is stopped.
>>>>>>>>> Sep 29 10:31:42 cvtst1 clurgmgrd[7224]: <notice> Resource Group
>>>>>>>>> Manager Starting
>>>>>>>>> Sep 29 10:39:06 cvtst1 rgmanager: [10327]: <notice> Shutting down
>>>>>>>>> Cluster Service Manager...
>>>>>>>>> Sep 29 10:39:16 cvtst1 rgmanager: [10327]: <notice> Cluster Service
>>>>>>>>> Manager is stopped.
>>>>>>>>> Sep 29 10:39:16 cvtst1 clurgmgrd[10380]: <notice> Resource Group
>>>>>>>>> Manager Starting
>>>>>>>>> Sep 29 10:39:52 cvtst1 clurgmgrd[10380]: <notice> Member 1 shutting
>>>>>>>>> down
>>>>>>>>>
>>>>>>>>> I do not know what the last line means.
>>>>>>>>>
>>>>>>>>> rgmanager version I am running is:
>>>>>>>>> rgmanager-2.0.52-1.el5.centos
>>>>>>>>>
>>>>>>>>> I don't what has gone wrong.
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>> Paras.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, Sep 28, 2009 at 6:41 PM, brem belguebli
>>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> you mean it stopped successfully on all the nodes but it is failing
>>>>>>>>>> to
>>>>>>>>>> start only on node cvtst1 ?
>>>>>>>>>>
>>>>>>>>>> look at the following page to make rgmanager more verbose. It 'll
>>>>>>>>>> help debug....
>>>>>>>>>>
>>>>>>>>>> http://sources.redhat.com/cluster/wiki/RGManager
>>>>>>>>>>
>>>>>>>>>> at Logging Configuration section
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2009/9/29 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>>>
>>>>>>>>>>> Brem,
>>>>>>>>>>>
>>>>>>>>>>> When I try to restart rgmanager on all the nodes, this time i do not
>>>>>>>>>>> see rgmanager running on the first node. But I do see on other 2
>>>>>>>>>>> nodes.
>>>>>>>>>>>
>>>>>>>>>>> Log on the first node:
>>>>>>>>>>>
>>>>>>>>>>> Sep 28 18:13:58 cvtst1 clurgmgrd[24099]: <notice> Resource Group
>>>>>>>>>>> Manager Starting
>>>>>>>>>>> Sep 28 18:17:29 cvtst1 rgmanager: [24627]: <notice> Shutting down
>>>>>>>>>>> Cluster Service Manager...
>>>>>>>>>>> Sep 28 18:17:29 cvtst1 clurgmgrd[24099]: <notice> Shutting down
>>>>>>>>>>> Sep 28 18:17:39 cvtst1 clurgmgrd[24099]: <notice> Shutdown complete,
>>>>>>>>>>> exiting
>>>>>>>>>>> Sep 28 18:17:39 cvtst1 rgmanager: [24627]: <notice> Cluster Service
>>>>>>>>>>> Manager is stopped.
>>>>>>>>>>> Sep 28 18:17:40 cvtst1 clurgmgrd[24679]: <notice> Resource Group
>>>>>>>>>>> Manager Starting
>>>>>>>>>>>
>>>>>>>>>>> -
>>>>>>>>>>> It seems service is running , but I do not see rgmanger running
>>>>>>>>>>> using clustat
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Don't know what is going on.
>>>>>>>>>>>
>>>>>>>>>>> Thanks
>>>>>>>>>>> Paras.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Sep 28, 2009 at 5:46 PM, brem belguebli
>>>>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Paras,
>>>>>>>>>>>>
>>>>>>>>>>>> Another thing, it would have been more interesting to have a start
>>>>>>>>>>>> DEBUG not a stop.
>>>>>>>>>>>>
>>>>>>>>>>>> That's why I was asking you to first stop the vm manually on all
>>>>>>>>>>>> your
>>>>>>>>>>>> nodes, stop eventually rgmanager on all the nodes to reset the
>>>>>>>>>>>> potential wrong states you may have, restart rgmanager.
>>>>>>>>>>>>
>>>>>>>>>>>> If your VM is configured to autostart, this will make it start.
>>>>>>>>>>>>
>>>>>>>>>>>> It should normally fail (as it does now). Send out your newly
>>>>>>>>>>>> created
>>>>>>>>>>>> DEBUG file.
>>>>>>>>>>>>
>>>>>>>>>>>> 2009/9/29 brem belguebli <brem.belguebli at gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Paras,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> I don't know the xen/cluster combination well, but if I do
>>>>>>>>>>>>> remember
>>>>>>>>>>>>> well, I think I've read somewhere that when using xen you have to
>>>>>>>>>>>>> declare the use_virsh=0 key in the VM definition in the
>>>>>>>>>>>>> cluster.conf.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This would make rgmanager use xm commands instead of virsh
>>>>>>>>>>>>> The DEBUG output shows clearly that you are using virsh to manage
>>>>>>>>>>>>> your
>>>>>>>>>>>>> VM instead of xm commands.
>>>>>>>>>>>>> Check out the RH docs about virtualization
>>>>>>>>>>>>>
>>>>>>>>>>>>> I'm not a 100% sure about that, I may be completely wrong.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Brem
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2009/9/28 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> The only thing I noticed is the message after stopping the vm
>>>>>>>>>>>>>> using xm
>>>>>>>>>>>>>> in all nodes and starting using clusvcadm is
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "Virtual machine guest1 is blocked"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The whole DEBUG file is attached.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>> Paras.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, Sep 25, 2009 at 5:53 PM, brem belguebli
>>>>>>>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> There's a problem with the script that is called by rgmanager to
>>>>>>>>>>>>>>> start
>>>>>>>>>>>>>>> the VM, I don't know what causes it
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> May be you should try something like :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 1) stop the VM on all nodes with xm commands
>>>>>>>>>>>>>>> 2) edit the /usr/share/cluster/vm.sh script and add the
>>>>>>>>>>>>>>> following
>>>>>>>>>>>>>>> lines (after the #!/bin/bash ):
>>>>>>>>>>>>>>> exec >/tmp/DEBUG 2>&1
>>>>>>>>>>>>>>> set -x
>>>>>>>>>>>>>>> 3) start the VM with clusvcadm -e vm:guest1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It should fail as it did before.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> edit the the /tmp/DEBUG file and you will be able to see where
>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>> fails (it may generate a lot of debug)
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 4) remove the debug lines from /usr/share/cluster/vm.sh
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Post the DEBUG file if you're not able to see where it fails.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Brem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2009/9/26 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> No I am not manually starting not using automatic init scripts.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I started the vm using: clusvcadm -e vm:guest1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I have just stopped using clusvcadm -s vm:guest1. For few
>>>>>>>>>>>>>>>> seconds it
>>>>>>>>>>>>>>>> says guest1 started . But after a while I can see the guest1 on
>>>>>>>>>>>>>>>> all
>>>>>>>>>>>>>>>> three nodes.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> clustat says:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Service Name Owner
>>>>>>>>>>>>>>>> (Last)
>>>>>>>>>>>>>>>> State
>>>>>>>>>>>>>>>> ------- ---- -----
>>>>>>>>>>>>>>>> ------
>>>>>>>>>>>>>>>> -----
>>>>>>>>>>>>>>>> vm:guest1 (none)
>>>>>>>>>>>>>>>> stopped
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> But I can see the vm from xm li.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> This is what I can see from the log:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sep 25 17:19:01 cvtst1 clurgmgrd[4298]: <notice> start on vm
>>>>>>>>>>>>>>>> "guest1"
>>>>>>>>>>>>>>>> returned 1 (generic error)
>>>>>>>>>>>>>>>> Sep 25 17:19:01 cvtst1 clurgmgrd[4298]: <warning> #68: Failed
>>>>>>>>>>>>>>>> to start
>>>>>>>>>>>>>>>> vm:guest1; return value: 1
>>>>>>>>>>>>>>>> Sep 25 17:19:01 cvtst1 clurgmgrd[4298]: <notice> Stopping
>>>>>>>>>>>>>>>> service vm:guest1
>>>>>>>>>>>>>>>> Sep 25 17:19:02 cvtst1 clurgmgrd[4298]: <notice> Service
>>>>>>>>>>>>>>>> vm:guest1 is
>>>>>>>>>>>>>>>> recovering
>>>>>>>>>>>>>>>> Sep 25 17:19:15 cvtst1 clurgmgrd[4298]: <notice> Recovering
>>>>>>>>>>>>>>>> failed
>>>>>>>>>>>>>>>> service vm:guest1
>>>>>>>>>>>>>>>> Sep 25 17:19:16 cvtst1 clurgmgrd[4298]: <notice> start on vm
>>>>>>>>>>>>>>>> "guest1"
>>>>>>>>>>>>>>>> returned 1 (generic error)
>>>>>>>>>>>>>>>> Sep 25 17:19:16 cvtst1 clurgmgrd[4298]: <warning> #68: Failed
>>>>>>>>>>>>>>>> to start
>>>>>>>>>>>>>>>> vm:guest1; return value: 1
>>>>>>>>>>>>>>>> Sep 25 17:19:16 cvtst1 clurgmgrd[4298]: <notice> Stopping
>>>>>>>>>>>>>>>> service vm:guest1
>>>>>>>>>>>>>>>> Sep 25 17:19:17 cvtst1 clurgmgrd[4298]: <notice> Service
>>>>>>>>>>>>>>>> vm:guest1 is
>>>>>>>>>>>>>>>> recovering
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Paras.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Fri, Sep 25, 2009 at 5:07 PM, brem belguebli
>>>>>>>>>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Have you started your VM via rgmanager (clusvcadm -e
>>>>>>>>>>>>>>>>> vm:guest1) or
>>>>>>>>>>>>>>>>> using xm commands out of cluster control (or maybe a thru an
>>>>>>>>>>>>>>>>> automatic init script ?)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> When clustered, you should never be starting services
>>>>>>>>>>>>>>>>> (manually or
>>>>>>>>>>>>>>>>> thru automatic init script) out of cluster control
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> The thing would be to stop your vm on all the nodes with the
>>>>>>>>>>>>>>>>> adequate
>>>>>>>>>>>>>>>>> xm command (not using xen myself) and try to start it with
>>>>>>>>>>>>>>>>> clusvcadm.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Then see if it is started on all nodes (send clustat output)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2009/9/25 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Ok. Please see below. my vm is running on all nodes though
>>>>>>>>>>>>>>>>>> clustat
>>>>>>>>>>>>>>>>>> says it is stopped.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> [root at cvtst1 ~]# clustat
>>>>>>>>>>>>>>>>>> Cluster Status for test @ Fri Sep 25 16:52:34 2009
>>>>>>>>>>>>>>>>>> Member Status: Quorate
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Member Name
>>>>>>>>>>>>>>>>>> ID Status
>>>>>>>>>>>>>>>>>> ------ ----
>>>>>>>>>>>>>>>>>> ---- ------
>>>>>>>>>>>>>>>>>> cvtst2 1
>>>>>>>>>>>>>>>>>> Online, rgmanager
>>>>>>>>>>>>>>>>>> cvtst1 2
>>>>>>>>>>>>>>>>>> Online,
>>>>>>>>>>>>>>>>>> Local, rgmanager
>>>>>>>>>>>>>>>>>> cvtst3 3
>>>>>>>>>>>>>>>>>> Online, rgmanager
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Service Name
>>>>>>>>>>>>>>>>>> Owner (Last)
>>>>>>>>>>>>>>>>>> State
>>>>>>>>>>>>>>>>>> ------- ----
>>>>>>>>>>>>>>>>>> ----- ------
>>>>>>>>>>>>>>>>>> -----
>>>>>>>>>>>>>>>>>> vm:guest1
>>>>>>>>>>>>>>>>>> (none)
>>>>>>>>>>>>>>>>>> stopped
>>>>>>>>>>>>>>>>>> [root at cvtst1 ~]#
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>>>> o/p of xm li on cvtst1
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> [root at cvtst1 ~]# xm li
>>>>>>>>>>>>>>>>>> Name ID Mem(MiB) VCPUs
>>>>>>>>>>>>>>>>>> State Time(s)
>>>>>>>>>>>>>>>>>> Domain-0 0 3470 2
>>>>>>>>>>>>>>>>>> r----- 28939.4
>>>>>>>>>>>>>>>>>> guest1 7 511 1
>>>>>>>>>>>>>>>>>> -b---- 7727.8
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> o/p of xm li on cvtst2
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> [root at cvtst2 ~]# xm li
>>>>>>>>>>>>>>>>>> Name ID Mem(MiB) VCPUs
>>>>>>>>>>>>>>>>>> State Time(s)
>>>>>>>>>>>>>>>>>> Domain-0 0 3470 2
>>>>>>>>>>>>>>>>>> r----- 31558.9
>>>>>>>>>>>>>>>>>> guest1 21 511 1
>>>>>>>>>>>>>>>>>> -b---- 7558.2
>>>>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>> Paras.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Fri, Sep 25, 2009 at 4:22 PM, brem belguebli
>>>>>>>>>>>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> It looks like no.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> can you send an output of clustat of when the VM is running
>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>> multiple nodes at the same time?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> And by the way, another one after having stopped (clusvcadm
>>>>>>>>>>>>>>>>>>> -s vm:guest1) ?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2009/9/25 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Anyone having issue as mine? Virtual machine service is not
>>>>>>>>>>>>>>>>>>>> being
>>>>>>>>>>>>>>>>>>>> properly handled by the cluster.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>>>> Paras.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Mon, Sep 21, 2009 at 9:55 AM, Paras pradhan
>>>>>>>>>>>>>>>>>>>> <pradhanparas at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Ok.. here is my cluster.conf file
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>> [root at cvtst1 cluster]# more cluster.conf
>>>>>>>>>>>>>>>>>>>>> <?xml version="1.0"?>
>>>>>>>>>>>>>>>>>>>>> <cluster alias="test" config_version="9" name="test">
>>>>>>>>>>>>>>>>>>>>> <fence_daemon clean_start="0" post_fail_delay="0"
>>>>>>>>>>>>>>>>>>>>> post_join_delay="3"/>
>>>>>>>>>>>>>>>>>>>>> <clusternodes>
>>>>>>>>>>>>>>>>>>>>> <clusternode name="cvtst2" nodeid="1"
>>>>>>>>>>>>>>>>>>>>> votes="1">
>>>>>>>>>>>>>>>>>>>>> <fence/>
>>>>>>>>>>>>>>>>>>>>> </clusternode>
>>>>>>>>>>>>>>>>>>>>> <clusternode name="cvtst1" nodeid="2"
>>>>>>>>>>>>>>>>>>>>> votes="1">
>>>>>>>>>>>>>>>>>>>>> <fence/>
>>>>>>>>>>>>>>>>>>>>> </clusternode>
>>>>>>>>>>>>>>>>>>>>> <clusternode name="cvtst3" nodeid="3"
>>>>>>>>>>>>>>>>>>>>> votes="1">
>>>>>>>>>>>>>>>>>>>>> <fence/>
>>>>>>>>>>>>>>>>>>>>> </clusternode>
>>>>>>>>>>>>>>>>>>>>> </clusternodes>
>>>>>>>>>>>>>>>>>>>>> <cman/>
>>>>>>>>>>>>>>>>>>>>> <fencedevices/>
>>>>>>>>>>>>>>>>>>>>> <rm>
>>>>>>>>>>>>>>>>>>>>> <failoverdomains>
>>>>>>>>>>>>>>>>>>>>> <failoverdomain name="myfd1"
>>>>>>>>>>>>>>>>>>>>> nofailback="0" ordered="1" restricted="0">
>>>>>>>>>>>>>>>>>>>>> <failoverdomainnode
>>>>>>>>>>>>>>>>>>>>> name="cvtst2" priority="3"/>
>>>>>>>>>>>>>>>>>>>>> <failoverdomainnode
>>>>>>>>>>>>>>>>>>>>> name="cvtst1" priority="1"/>
>>>>>>>>>>>>>>>>>>>>> <failoverdomainnode
>>>>>>>>>>>>>>>>>>>>> name="cvtst3" priority="2"/>
>>>>>>>>>>>>>>>>>>>>> </failoverdomain>
>>>>>>>>>>>>>>>>>>>>> </failoverdomains>
>>>>>>>>>>>>>>>>>>>>> <resources/>
>>>>>>>>>>>>>>>>>>>>> <vm autostart="1" domain="myfd1"
>>>>>>>>>>>>>>>>>>>>> exclusive="0" max_restarts="0"
>>>>>>>>>>>>>>>>>>>>> name="guest1" path="/vms" recovery="r
>>>>>>>>>>>>>>>>>>>>> estart" restart_expire_time="0"/>
>>>>>>>>>>>>>>>>>>>>> </rm>
>>>>>>>>>>>>>>>>>>>>> </cluster>
>>>>>>>>>>>>>>>>>>>>> [root at cvtst1 cluster]#
>>>>>>>>>>>>>>>>>>>>> ------
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>>>>>>>>> Paras.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Sun, Sep 20, 2009 at 9:44 AM, Volker Dormeyer
>>>>>>>>>>>>>>>>>>>>> <volker at ixolution.de> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Fri, Sep 18, 2009 at 05:08:57PM -0500,
>>>>>>>>>>>>>>>>>>>>>> Paras pradhan <pradhanparas at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I am using cluster suite for HA of xen virtual machines.
>>>>>>>>>>>>>>>>>>>>>>> Now I am
>>>>>>>>>>>>>>>>>>>>>>> having another problem. When I start the my xen vm in
>>>>>>>>>>>>>>>>>>>>>>> one node, it
>>>>>>>>>>>>>>>>>>>>>>> also starts on other nodes. Which daemon controls this?
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> This is usually done bei clurgmgrd (which is part of the
>>>>>>>>>>>>>>>>>>>>>> rgmanager
>>>>>>>>>>>>>>>>>>>>>> package). To me, this sounds like a configuration
>>>>>>>>>>>>>>>>>>>>>> problem. Maybe,
>>>>>>>>>>>>>>>>>>>>>> you can post your cluster.conf?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>>>> Volker
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Linux-cluster mailing list
>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Linux-cluster mailing list
>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>>
>>>>>>>>>
>>>>>>>> --
>>>>>>>> Linux-cluster mailing list
>>>>>>>> Linux-cluster at redhat.com
>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>
>>>>>>>>
>>>>>>> --
>>>>>>> Linux-cluster mailing list
>>>>>>> Linux-cluster at redhat.com
>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>
>>>>>>>
>>>>>> --
>>>>>> Linux-cluster mailing list
>>>>>> Linux-cluster at redhat.com
>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>
>>>>>>
>>>>> --
>>>>> Linux-cluster mailing list
>>>>> Linux-cluster at redhat.com
>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>
>>>> --
>>>> Linux-cluster mailing list
>>>> Linux-cluster at redhat.com
>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>
>>> --
>>> Linux-cluster mailing list
>>> Linux-cluster at redhat.com
>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster at redhat.com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
--
- Daniela Anzellotti ------------------------------------
INFN Roma - tel.: +39.06.49914282 - fax: +39.06.490354
e-mail: daniela.anzellotti at roma1.infn.it
---------------------------------------------------------
More information about the Linux-cluster
mailing list