[Linux-cluster] openais issue
Paras pradhan
pradhanparas at gmail.com
Tue Sep 29 21:11:39 UTC 2009
Ok here it is.
<?xml version="1.0"?>
<cluster alias="test" config_version="23" name="test">
<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>
<clusternodes>
<clusternode name="cvtst2" nodeid="1" votes="1">
<fence/>
</clusternode>
<clusternode name="cvtst1" nodeid="2" votes="1">
<fence/>
</clusternode>
<clusternode name="cvtst3" nodeid="3" votes="1">
<fence/>
</clusternode>
</clusternodes>
<cman/>
<fencedevices/>
<rm log_level="7" log_facility="local4">
<failoverdomains>
<failoverdomain name="myfd1" nofailback="0" ordered="1" restricted="0">
<failoverdomainnode name="cvtst2" priority="3"/>
<failoverdomainnode name="cvtst1" priority="1"/>
<failoverdomainnode name="cvtst3" priority="2"/>
</failoverdomain>
</failoverdomains>
<resources/>
<vm autostart="0" domain="myfd1" exclusive="0" max_restarts="0"
name="guest1" path="/vms" recovery="restart" restart_expire_time="0"/>
</rm>
</cluster>
Thanks
Paras.
On Tue, Sep 29, 2009 at 4:08 PM, brem belguebli
<brem.belguebli at gmail.com> wrote:
> the whole cluster.conf not only the vm entry.
>
> The problem seems to be rgmanager,
>
> 2009/9/29 Paras pradhan <pradhanparas at gmail.com>:
>> Yes strange.
>>
>> cluster.conf 's entry is
>>
>> <vm autostart="0" domain="myfd1" exclusive="0" max_restarts="0"
>> name="guest1" path="/vms" recovery="restart" restart_expire_time="0"/>
>>
>>
>> Paras.
>>
>>
>> On Tue, Sep 29, 2009 at 4:02 PM, brem belguebli
>> <brem.belguebli at gmail.com> wrote:
>>> That looks strange, maybe your cluster.conf will help
>>>
>>> 2009/9/29 Paras pradhan <pradhanparas at gmail.com>:
>>>> I don't see rgmanager .
>>>>
>>>> Here is the o/p from clustat
>>>>
>>>> [root at cvtst1 cluster]# clustat
>>>> Cluster Status for test @ Tue Sep 29 15:53:33 2009
>>>> Member Status: Quorate
>>>>
>>>> Member Name ID Status
>>>> ------ ---- ---- ------
>>>> cvtst2 1 Online
>>>> cvtst1 2 Online, Local
>>>> cvtst3 3 Online
>>>>
>>>>
>>>> Thanks
>>>> Paras.
>>>>
>>>> On Tue, Sep 29, 2009 at 3:44 PM, brem belguebli
>>>> <brem.belguebli at gmail.com> wrote:
>>>>> It looks correct, rgmanager seems to start on all nodes
>>>>>
>>>>> what gives you clustat ?
>>>>>
>>>>> If rgmanager doesn't show, check out the logs something may have gone wrong.
>>>>>
>>>>>
>>>>> 2009/9/29 Paras pradhan <pradhanparas at gmail.com>:
>>>>>> Change to 7 and i got this log
>>>>>>
>>>>>> Sep 29 15:33:50 cvtst1 rgmanager: [23295]: <notice> Shutting down
>>>>>> Cluster Service Manager...
>>>>>> Sep 29 15:33:50 cvtst1 clurgmgrd[22869]: <notice> Shutting down
>>>>>> Sep 29 15:33:50 cvtst1 clurgmgrd[22869]: <notice> Shutting down
>>>>>> Sep 29 15:33:50 cvtst1 clurgmgrd[22869]: <notice> Shutdown complete, exiting
>>>>>> Sep 29 15:33:50 cvtst1 rgmanager: [23295]: <notice> Cluster Service
>>>>>> Manager is stopped.
>>>>>> Sep 29 15:33:51 cvtst1 clurgmgrd[23324]: <notice> Resource Group
>>>>>> Manager Starting
>>>>>> Sep 29 15:33:51 cvtst1 clurgmgrd[23324]: <info> Loading Service Data
>>>>>> Sep 29 15:33:51 cvtst1 clurgmgrd[23324]: <debug> Loading Resource Rules
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 21 rules loaded
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> Building Resource Trees
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 0 resources defined
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> Loading Failover Domains
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 1 domains defined
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> 1 events defined
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> Initializing Services
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> Services Initialized
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <debug> Event: Port Opened
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> State change: Local UP
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> State change: cvtst2 UP
>>>>>> Sep 29 15:33:52 cvtst1 clurgmgrd[23324]: <info> State change: cvtst3 UP
>>>>>> Sep 29 15:33:57 cvtst1 clurgmgrd[23324]: <debug> Event (1:2:1) Processed
>>>>>> Sep 29 15:33:57 cvtst1 clurgmgrd[23324]: <debug> Event (0:1:1) Processed
>>>>>> Sep 29 15:33:57 cvtst1 clurgmgrd[23324]: <debug> Event (0:3:1) Processed
>>>>>> Sep 29 15:34:02 cvtst1 clurgmgrd[23324]: <debug> 3 events processed
>>>>>>
>>>>>>
>>>>>> Anything unusual here?
>>>>>>
>>>>>> Paras.
>>>>>>
>>>>>> On Tue, Sep 29, 2009 at 11:51 AM, brem belguebli
>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>> I use log_level=7 to have more debugging info.
>>>>>>>
>>>>>>> It seems 4 is not enough.
>>>>>>>
>>>>>>> Brem
>>>>>>>
>>>>>>>
>>>>>>> 2009/9/29, Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>> Withe log_level of 3 I got only this
>>>>>>>>
>>>>>>>> Sep 29 10:31:31 cvtst1 rgmanager: [7170]: <notice> Shutting down
>>>>>>>> Cluster Service Manager...
>>>>>>>> Sep 29 10:31:31 cvtst1 clurgmgrd[6673]: <notice> Shutting down
>>>>>>>> Sep 29 10:31:41 cvtst1 clurgmgrd[6673]: <notice> Shutdown complete, exiting
>>>>>>>> Sep 29 10:31:41 cvtst1 rgmanager: [7170]: <notice> Cluster Service
>>>>>>>> Manager is stopped.
>>>>>>>> Sep 29 10:31:42 cvtst1 clurgmgrd[7224]: <notice> Resource Group
>>>>>>>> Manager Starting
>>>>>>>> Sep 29 10:39:06 cvtst1 rgmanager: [10327]: <notice> Shutting down
>>>>>>>> Cluster Service Manager...
>>>>>>>> Sep 29 10:39:16 cvtst1 rgmanager: [10327]: <notice> Cluster Service
>>>>>>>> Manager is stopped.
>>>>>>>> Sep 29 10:39:16 cvtst1 clurgmgrd[10380]: <notice> Resource Group
>>>>>>>> Manager Starting
>>>>>>>> Sep 29 10:39:52 cvtst1 clurgmgrd[10380]: <notice> Member 1 shutting down
>>>>>>>>
>>>>>>>> I do not know what the last line means.
>>>>>>>>
>>>>>>>> rgmanager version I am running is:
>>>>>>>> rgmanager-2.0.52-1.el5.centos
>>>>>>>>
>>>>>>>> I don't what has gone wrong.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Paras.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, Sep 28, 2009 at 6:41 PM, brem belguebli
>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>> > you mean it stopped successfully on all the nodes but it is failing to
>>>>>>>> > start only on node cvtst1 ?
>>>>>>>> >
>>>>>>>> > look at the following page to make rgmanager more verbose. It 'll
>>>>>>>> > help debug....
>>>>>>>> >
>>>>>>>> > http://sources.redhat.com/cluster/wiki/RGManager
>>>>>>>> >
>>>>>>>> > at Logging Configuration section
>>>>>>>> >
>>>>>>>> >
>>>>>>>> >
>>>>>>>> >
>>>>>>>> > 2009/9/29 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>> >> Brem,
>>>>>>>> >>
>>>>>>>> >> When I try to restart rgmanager on all the nodes, this time i do not
>>>>>>>> >> see rgmanager running on the first node. But I do see on other 2
>>>>>>>> >> nodes.
>>>>>>>> >>
>>>>>>>> >> Log on the first node:
>>>>>>>> >>
>>>>>>>> >> Sep 28 18:13:58 cvtst1 clurgmgrd[24099]: <notice> Resource Group
>>>>>>>> >> Manager Starting
>>>>>>>> >> Sep 28 18:17:29 cvtst1 rgmanager: [24627]: <notice> Shutting down
>>>>>>>> >> Cluster Service Manager...
>>>>>>>> >> Sep 28 18:17:29 cvtst1 clurgmgrd[24099]: <notice> Shutting down
>>>>>>>> >> Sep 28 18:17:39 cvtst1 clurgmgrd[24099]: <notice> Shutdown complete, exiting
>>>>>>>> >> Sep 28 18:17:39 cvtst1 rgmanager: [24627]: <notice> Cluster Service
>>>>>>>> >> Manager is stopped.
>>>>>>>> >> Sep 28 18:17:40 cvtst1 clurgmgrd[24679]: <notice> Resource Group
>>>>>>>> >> Manager Starting
>>>>>>>> >>
>>>>>>>> >> -
>>>>>>>> >> It seems service is running , but I do not see rgmanger running using clustat
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> Don't know what is going on.
>>>>>>>> >>
>>>>>>>> >> Thanks
>>>>>>>> >> Paras.
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> On Mon, Sep 28, 2009 at 5:46 PM, brem belguebli
>>>>>>>> >> <brem.belguebli at gmail.com> wrote:
>>>>>>>> >>> Paras,
>>>>>>>> >>>
>>>>>>>> >>> Another thing, it would have been more interesting to have a start
>>>>>>>> >>> DEBUG not a stop.
>>>>>>>> >>>
>>>>>>>> >>> That's why I was asking you to first stop the vm manually on all your
>>>>>>>> >>> nodes, stop eventually rgmanager on all the nodes to reset the
>>>>>>>> >>> potential wrong states you may have, restart rgmanager.
>>>>>>>> >>>
>>>>>>>> >>> If your VM is configured to autostart, this will make it start.
>>>>>>>> >>>
>>>>>>>> >>> It should normally fail (as it does now). Send out your newly created
>>>>>>>> >>> DEBUG file.
>>>>>>>> >>>
>>>>>>>> >>> 2009/9/29 brem belguebli <brem.belguebli at gmail.com>:
>>>>>>>> >>>> Hi Paras,
>>>>>>>> >>>>
>>>>>>>> >>>>
>>>>>>>> >>>> I don't know the xen/cluster combination well, but if I do remember
>>>>>>>> >>>> well, I think I've read somewhere that when using xen you have to
>>>>>>>> >>>> declare the use_virsh=0 key in the VM definition in the cluster.conf.
>>>>>>>> >>>>
>>>>>>>> >>>> This would make rgmanager use xm commands instead of virsh
>>>>>>>> >>>> The DEBUG output shows clearly that you are using virsh to manage your
>>>>>>>> >>>> VM instead of xm commands.
>>>>>>>> >>>> Check out the RH docs about virtualization
>>>>>>>> >>>>
>>>>>>>> >>>> I'm not a 100% sure about that, I may be completely wrong.
>>>>>>>> >>>>
>>>>>>>> >>>> Brem
>>>>>>>> >>>>
>>>>>>>> >>>> 2009/9/28 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>> >>>>> The only thing I noticed is the message after stopping the vm using xm
>>>>>>>> >>>>> in all nodes and starting using clusvcadm is
>>>>>>>> >>>>>
>>>>>>>> >>>>> "Virtual machine guest1 is blocked"
>>>>>>>> >>>>>
>>>>>>>> >>>>> The whole DEBUG file is attached.
>>>>>>>> >>>>>
>>>>>>>> >>>>>
>>>>>>>> >>>>> Thanks
>>>>>>>> >>>>> Paras.
>>>>>>>> >>>>>
>>>>>>>> >>>>> On Fri, Sep 25, 2009 at 5:53 PM, brem belguebli
>>>>>>>> >>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>> >>>>>> There's a problem with the script that is called by rgmanager to start
>>>>>>>> >>>>>> the VM, I don't know what causes it
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> May be you should try something like :
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> 1) stop the VM on all nodes with xm commands
>>>>>>>> >>>>>> 2) edit the /usr/share/cluster/vm.sh script and add the following
>>>>>>>> >>>>>> lines (after the #!/bin/bash ):
>>>>>>>> >>>>>> exec >/tmp/DEBUG 2>&1
>>>>>>>> >>>>>> set -x
>>>>>>>> >>>>>> 3) start the VM with clusvcadm -e vm:guest1
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> It should fail as it did before.
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> edit the the /tmp/DEBUG file and you will be able to see where it
>>>>>>>> >>>>>> fails (it may generate a lot of debug)
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> 4) remove the debug lines from /usr/share/cluster/vm.sh
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> Post the DEBUG file if you're not able to see where it fails.
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> Brem
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> 2009/9/26 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>> >>>>>>> No I am not manually starting not using automatic init scripts.
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> I started the vm using: clusvcadm -e vm:guest1
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> I have just stopped using clusvcadm -s vm:guest1. For few seconds it
>>>>>>>> >>>>>>> says guest1 started . But after a while I can see the guest1 on all
>>>>>>>> >>>>>>> three nodes.
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> clustat says:
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> Service Name Owner (Last)
>>>>>>>> >>>>>>> State
>>>>>>>> >>>>>>> ------- ---- ----- ------
>>>>>>>> >>>>>>> -----
>>>>>>>> >>>>>>> vm:guest1 (none)
>>>>>>>> >>>>>>> stopped
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> But I can see the vm from xm li.
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> This is what I can see from the log:
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> Sep 25 17:19:01 cvtst1 clurgmgrd[4298]: <notice> start on vm "guest1"
>>>>>>>> >>>>>>> returned 1 (generic error)
>>>>>>>> >>>>>>> Sep 25 17:19:01 cvtst1 clurgmgrd[4298]: <warning> #68: Failed to start
>>>>>>>> >>>>>>> vm:guest1; return value: 1
>>>>>>>> >>>>>>> Sep 25 17:19:01 cvtst1 clurgmgrd[4298]: <notice> Stopping service vm:guest1
>>>>>>>> >>>>>>> Sep 25 17:19:02 cvtst1 clurgmgrd[4298]: <notice> Service vm:guest1 is
>>>>>>>> >>>>>>> recovering
>>>>>>>> >>>>>>> Sep 25 17:19:15 cvtst1 clurgmgrd[4298]: <notice> Recovering failed
>>>>>>>> >>>>>>> service vm:guest1
>>>>>>>> >>>>>>> Sep 25 17:19:16 cvtst1 clurgmgrd[4298]: <notice> start on vm "guest1"
>>>>>>>> >>>>>>> returned 1 (generic error)
>>>>>>>> >>>>>>> Sep 25 17:19:16 cvtst1 clurgmgrd[4298]: <warning> #68: Failed to start
>>>>>>>> >>>>>>> vm:guest1; return value: 1
>>>>>>>> >>>>>>> Sep 25 17:19:16 cvtst1 clurgmgrd[4298]: <notice> Stopping service vm:guest1
>>>>>>>> >>>>>>> Sep 25 17:19:17 cvtst1 clurgmgrd[4298]: <notice> Service vm:guest1 is
>>>>>>>> >>>>>>> recovering
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> Paras.
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> On Fri, Sep 25, 2009 at 5:07 PM, brem belguebli
>>>>>>>> >>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>> >>>>>>>> Have you started your VM via rgmanager (clusvcadm -e vm:guest1) or
>>>>>>>> >>>>>>>> using xm commands out of cluster control (or maybe a thru an
>>>>>>>> >>>>>>>> automatic init script ?)
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>> When clustered, you should never be starting services (manually or
>>>>>>>> >>>>>>>> thru automatic init script) out of cluster control
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>> The thing would be to stop your vm on all the nodes with the adequate
>>>>>>>> >>>>>>>> xm command (not using xen myself) and try to start it with clusvcadm.
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>> Then see if it is started on all nodes (send clustat output)
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>> 2009/9/25 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>> >>>>>>>>> Ok. Please see below. my vm is running on all nodes though clustat
>>>>>>>> >>>>>>>>> says it is stopped.
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> --
>>>>>>>> >>>>>>>>> [root at cvtst1 ~]# clustat
>>>>>>>> >>>>>>>>> Cluster Status for test @ Fri Sep 25 16:52:34 2009
>>>>>>>> >>>>>>>>> Member Status: Quorate
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> Member Name ID Status
>>>>>>>> >>>>>>>>> ------ ---- ---- ------
>>>>>>>> >>>>>>>>> cvtst2 1 Online, rgmanager
>>>>>>>> >>>>>>>>> cvtst1 2 Online,
>>>>>>>> >>>>>>>>> Local, rgmanager
>>>>>>>> >>>>>>>>> cvtst3 3 Online, rgmanager
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> Service Name Owner (Last)
>>>>>>>> >>>>>>>>> State
>>>>>>>> >>>>>>>>> ------- ---- ----- ------
>>>>>>>> >>>>>>>>> -----
>>>>>>>> >>>>>>>>> vm:guest1 (none)
>>>>>>>> >>>>>>>>> stopped
>>>>>>>> >>>>>>>>> [root at cvtst1 ~]#
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> ---
>>>>>>>> >>>>>>>>> o/p of xm li on cvtst1
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> --
>>>>>>>> >>>>>>>>> [root at cvtst1 ~]# xm li
>>>>>>>> >>>>>>>>> Name ID Mem(MiB) VCPUs State Time(s)
>>>>>>>> >>>>>>>>> Domain-0 0 3470 2 r----- 28939.4
>>>>>>>> >>>>>>>>> guest1 7 511 1 -b---- 7727.8
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> o/p of xm li on cvtst2
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> --
>>>>>>>> >>>>>>>>> [root at cvtst2 ~]# xm li
>>>>>>>> >>>>>>>>> Name ID Mem(MiB) VCPUs State Time(s)
>>>>>>>> >>>>>>>>> Domain-0 0 3470 2 r----- 31558.9
>>>>>>>> >>>>>>>>> guest1 21 511 1 -b---- 7558.2
>>>>>>>> >>>>>>>>> ---
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> Thanks
>>>>>>>> >>>>>>>>> Paras.
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> On Fri, Sep 25, 2009 at 4:22 PM, brem belguebli
>>>>>>>> >>>>>>>>> <brem.belguebli at gmail.com> wrote:
>>>>>>>> >>>>>>>>>> It looks like no.
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>> can you send an output of clustat of when the VM is running on
>>>>>>>> >>>>>>>>>> multiple nodes at the same time?
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>> And by the way, another one after having stopped (clusvcadm -s vm:guest1) ?
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>> 2009/9/25 Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>> >>>>>>>>>>> Anyone having issue as mine? Virtual machine service is not being
>>>>>>>> >>>>>>>>>>> properly handled by the cluster.
>>>>>>>> >>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>
>>>>>>>> >>>>>>>>>>> Thanks
>>>>>>>> >>>>>>>>>>> Paras.
>>>>>>>> >>>>>>>>>>>
>>>>>>>> >>>>>>>>>>> On Mon, Sep 21, 2009 at 9:55 AM, Paras pradhan <pradhanparas at gmail.com> wrote:
>>>>>>>> >>>>>>>>>>>> Ok.. here is my cluster.conf file
>>>>>>>> >>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>> --
>>>>>>>> >>>>>>>>>>>> [root at cvtst1 cluster]# more cluster.conf
>>>>>>>> >>>>>>>>>>>> <?xml version="1.0"?>
>>>>>>>> >>>>>>>>>>>> <cluster alias="test" config_version="9" name="test">
>>>>>>>> >>>>>>>>>>>> <fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>
>>>>>>>> >>>>>>>>>>>> <clusternodes>
>>>>>>>> >>>>>>>>>>>> <clusternode name="cvtst2" nodeid="1" votes="1">
>>>>>>>> >>>>>>>>>>>> <fence/>
>>>>>>>> >>>>>>>>>>>> </clusternode>
>>>>>>>> >>>>>>>>>>>> <clusternode name="cvtst1" nodeid="2" votes="1">
>>>>>>>> >>>>>>>>>>>> <fence/>
>>>>>>>> >>>>>>>>>>>> </clusternode>
>>>>>>>> >>>>>>>>>>>> <clusternode name="cvtst3" nodeid="3" votes="1">
>>>>>>>> >>>>>>>>>>>> <fence/>
>>>>>>>> >>>>>>>>>>>> </clusternode>
>>>>>>>> >>>>>>>>>>>> </clusternodes>
>>>>>>>> >>>>>>>>>>>> <cman/>
>>>>>>>> >>>>>>>>>>>> <fencedevices/>
>>>>>>>> >>>>>>>>>>>> <rm>
>>>>>>>> >>>>>>>>>>>> <failoverdomains>
>>>>>>>> >>>>>>>>>>>> <failoverdomain name="myfd1" nofailback="0" ordered="1" restricted="0">
>>>>>>>> >>>>>>>>>>>> <failoverdomainnode name="cvtst2" priority="3"/>
>>>>>>>> >>>>>>>>>>>> <failoverdomainnode name="cvtst1" priority="1"/>
>>>>>>>> >>>>>>>>>>>> <failoverdomainnode name="cvtst3" priority="2"/>
>>>>>>>> >>>>>>>>>>>> </failoverdomain>
>>>>>>>> >>>>>>>>>>>> </failoverdomains>
>>>>>>>> >>>>>>>>>>>> <resources/>
>>>>>>>> >>>>>>>>>>>> <vm autostart="1" domain="myfd1" exclusive="0" max_restarts="0"
>>>>>>>> >>>>>>>>>>>> name="guest1" path="/vms" recovery="r
>>>>>>>> >>>>>>>>>>>> estart" restart_expire_time="0"/>
>>>>>>>> >>>>>>>>>>>> </rm>
>>>>>>>> >>>>>>>>>>>> </cluster>
>>>>>>>> >>>>>>>>>>>> [root at cvtst1 cluster]#
>>>>>>>> >>>>>>>>>>>> ------
>>>>>>>> >>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>> Thanks!
>>>>>>>> >>>>>>>>>>>> Paras.
>>>>>>>> >>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>> On Sun, Sep 20, 2009 at 9:44 AM, Volker Dormeyer <volker at ixolution.de> wrote:
>>>>>>>> >>>>>>>>>>>>> On Fri, Sep 18, 2009 at 05:08:57PM -0500,
>>>>>>>> >>>>>>>>>>>>> Paras pradhan <pradhanparas at gmail.com> wrote:
>>>>>>>> >>>>>>>>>>>>>> I am using cluster suite for HA of xen virtual machines. Now I am
>>>>>>>> >>>>>>>>>>>>>> having another problem. When I start the my xen vm in one node, it
>>>>>>>> >>>>>>>>>>>>>> also starts on other nodes. Which daemon controls this?
>>>>>>>> >>>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>>> This is usually done bei clurgmgrd (which is part of the rgmanager
>>>>>>>> >>>>>>>>>>>>> package). To me, this sounds like a configuration problem. Maybe,
>>>>>>>> >>>>>>>>>>>>> you can post your cluster.conf?
>>>>>>>> >>>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>>> Regards,
>>>>>>>> >>>>>>>>>>>>> Volker
>>>>>>>> >>>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>>> --
>>>>>>>> >>>>>>>>>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>>
>>>>>>>> >>>>>>>>>>>
>>>>>>>> >>>>>>>>>>> --
>>>>>>>> >>>>>>>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>>>>>>
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>> --
>>>>>>>> >>>>>>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>>>>>
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>> --
>>>>>>>> >>>>>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>>>>
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>> --
>>>>>>>> >>>>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>>>
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>> --
>>>>>>>> >>>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>>
>>>>>>>> >>>>>>
>>>>>>>> >>>>>> --
>>>>>>>> >>>>>> Linux-cluster mailing list
>>>>>>>> >>>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>>
>>>>>>>> >>>>>
>>>>>>>> >>>>> --
>>>>>>>> >>>>> Linux-cluster mailing list
>>>>>>>> >>>>> Linux-cluster at redhat.com
>>>>>>>> >>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>>>
>>>>>>>> >>>>
>>>>>>>> >>>
>>>>>>>> >>> --
>>>>>>>> >>> Linux-cluster mailing list
>>>>>>>> >>> Linux-cluster at redhat.com
>>>>>>>> >>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>>
>>>>>>>> >>
>>>>>>>> >> --
>>>>>>>> >> Linux-cluster mailing list
>>>>>>>> >> Linux-cluster at redhat.com
>>>>>>>> >> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >>
>>>>>>>> >
>>>>>>>> > --
>>>>>>>> > Linux-cluster mailing list
>>>>>>>> > Linux-cluster at redhat.com
>>>>>>>> > https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>> >
>>>>>>>>
>>>>>>>> --
>>>>>>>> Linux-cluster mailing list
>>>>>>>> Linux-cluster at redhat.com
>>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Linux-cluster mailing list
>>>>>>> Linux-cluster at redhat.com
>>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> Linux-cluster mailing list
>>>>>> Linux-cluster at redhat.com
>>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>>
>>>>>
>>>>> --
>>>>> Linux-cluster mailing list
>>>>> Linux-cluster at redhat.com
>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>
>>>>
>>>> --
>>>> Linux-cluster mailing list
>>>> Linux-cluster at redhat.com
>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>
>>>
>>> --
>>> Linux-cluster mailing list
>>> Linux-cluster at redhat.com
>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster at redhat.com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
More information about the Linux-cluster
mailing list