[Linux-cluster] Two node cluster, start CMAN fence the other node
Celso K. Webber
celsowebber at yahoo.com
Mon Apr 19 12:44:12 UTC 2010
Hello Chris,
Regarding number 2 below, in fact the default limits are "100", so Alex's configuration of "500" should increase the performance.
Of couse there can be configured for unlimited, but this is something one should decide by him(her)self according to the environment.
Please see this link:
http://www.linuxdynasty.org/howto-increase-gfs2-performance-in-a-cluster.html
Regards,
Celso.
________________________________
From: "Jankowski, Chris" <Chris.Jankowski at hp.com>
To: linux clustering <linux-cluster at redhat.com>
Sent: Fri, April 16, 2010 9:39:54 PM
Subject: Re: [Linux-cluster] Two node cluster, start CMAN fence the other node
Alex,
1.
Thank
you very much.
The
Cisco setup is very useful and the commands for testing multicast as
well.
2
Loking
at your cluster.conf, I would have thought that any limits on dlm and gfs lock
rates are counterproductive in the days of multicore CPUs and GbE. They
should be unlimited in my opinion. Under high load the limiting factor
will be saturation of one core by gfs control daemon.
Regards,
Chris
Jankowski
________________________________
From: linux-cluster-bounces at redhat.com
> [mailto:linux-cluster-bounces at redhat.com] On Behalf Of Alex
> Re
>Sent: Saturday, 17 April 2010 01:36
>To: linux
> clustering
>Subject: Re: [Linux-cluster] Two node cluster, start CMAN
> fence the other node
>
>Hi Chris,
>
>for the switches ports stuff check out this
> url:
>http://www.openais.org/doku.php?id=faq:cisco_switches
>
>We
> have finally configured an internal (private) VLAN joining there one NIC of
> each blade server. Now all cluster related traffic goes through those
> interfaces (eth2 at both servers in our case), including the traffic generated
> by the lock_dlm of the GFS2 filesystem, just created.
>
>To check
> multicast connectivity, these are two very useful commands, "nc -u -vvn -z
> <multicast_IP> 5405" to generate some multicast udp traffic and "tcpdump
> -i eth2 ether multicast" to check it from the other node. (eth2 in my
> particular case, of course).
>
>I have been playing a little with the
> lock_dlm, but here is how my cluster.conf looks now:
>
><?xml
> version="1.0"?>
><cluster config_version="7"
> name="VCluster">
> <fence_daemon post_fail_delay="0"
> post_join_delay="25"/>
>
> <clusternodes>
> <clusternode
> name="nodeaint" nodeid="1" votes="1">
>
> <multicast addr="239.0.0.1"
> interface="eth2"/>
>
> <fence>
>
> <method
> name="1">
>
> <device
> name="nodeaiLO"/>
>
> </method>
>
> </fence>
>
> </clusternode>
>
> <clusternode name="nodebint" nodeid="2"
> votes="1">
>
> <multicast addr="239.0.0.1" interface="eth2"/>
>
> <fence>
>
> <method
> name="1">
>
> <device
> name="nodebiLO"/>
>
> </method>
>
> </fence>
>
> </clusternode>
>
> </clusternodes>
> <cman expected_votes="1"
> two_node="1">
> <multicast
> addr="239.0.0.1"/>
>
> </cman>
> <fencedevices>
>
> <fencedevice agent="fence_ilo" hostname="nodeacn"
> login="user" name="nodeaiLO" passwd="hp"/>
>
> <fencedevice agent="fence_ilo" hostname="nodebcn"
> login="user" name="nodebiLO" passwd="hp"/>
>
> </fencedevices>
> <rm>
>
> <failoverdomains/>
>
> <resources/>
>
> </rm>
> <dlm plock_ownership="1"
> plock_rate_limit="500"/>
> <gfs_controld
> plock_rate_limit="500"/>
></cluster>
>
>Next
> thing to add... I'm going to play a little with the quorum
> devices.
>
>Hope it helps!
>
>Alex
>
>On 04/16/2010 05:00 PM,
> Jankowski, Chris wrote:
>
>eparate the cluster
>>interconne
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20100419/7444ae0f/attachment.htm>
More information about the Linux-cluster
mailing list