[Linux-cluster] cluster.conf question

[V B]

Guys, im also seeing this:

Why is it seeing 6 nodes?  Thanks

 cman_tool status
Version: 6.2.0
Config Version: 2
Cluster Name: WSExen
Cluster Id: 5456
Cluster Member: Yes
Cluster Generation: 616
Membership state: Cluster-Member
Nodes: 6
Expected votes: 4
Total votes: 4
Quorum: 3
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: nysv0194
Node ID: 3
Multicast addresses: 239.192.21.101
Node addresses: ip

On Thu, Aug 18, 2011 at 5:07 PM, V B <forums at clustermagnet.com> wrote:

> Gents,
>
>    Having a problem with an initial cluster deployment.  The idea is to
> have 4 nodes, connected to a FC lun, running xen... , clvm + ocfs2
>    The problem I am experiencing, fencing is not starting up... Also when
> /etc/init.d/cman start is issued, most hosts just sit there without giving
> back any results.
>    I am seeing errors such as  Cluster is not quorate.  Refusing
> connection.
>     (firewalls are open for port 6809udp)
>
> Can you please let me know if you think this cluster.conf is setup
> correctly?
>
> THANKS!
>
> My cluster.conf:
>
>     <?xml version="1.0"?>
>     <cluster name="WSExen" config_version="2">
>         <clusternodes>
>                 <clusternode name="host1" nodeid="1">
>                         <fence>
>                                 <method name="single">
>                                         <device name="manual" ipaddr="host
> 1`'s ip"/>
>                                 </method>
>                         </fence>
>                 </clusternode>
>                 <clusternode name="host2" nodeid="2">
>                         <fence>
>                                 <method name="single">
>                                         <device name="manual"
> ipaddr="host2's ip"/>
>                                 </method>
>                         </fence>
>                 </clusternode>
>                 <clusternode name="host3" nodeid="3">
>                         <fence>
>                                 <method name="single">
>                                         <device name="manual"
> ipaddr="host3's ip"/>
>                                 </method>
>                         </fence>
>                 </clusternode>
>                 <clusternode name="host4" nodeid="4">
>                         <fence>
>                                 <method name="single">
>                                         <device name="manual" ipaddr="host
> 4's ip"/>
>                                 </method>
>                         </fence>
>                 </clusternode>
>         </clusternodes>
>
>         <fence_daemon clean_start="1" post_fail_delay="0"
> post_join_delay="3"/>
>
>         <fencedevices>
>                 <fencedevice name="manual" agent="fence_manual"/>
>         </fencedevices>
>
>    <rm>
>    </rm>
>
>    <cman port="6809">
>    </cman>
> </cluster>
>
> Thanks for all your help!
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20110818/305f8242/attachment.htm>