[Linux-cluster] iLo3 and RedHat 5.5 : Unable to connect/login to fencing device

[שלום קלמר]

Hi.
for ilo3 testing you can use :
# fence_ipmilan -a 17x.3x.7x.1xx -p "password" -o status

 fence_ipmilan -h
usage: fence_ipmilan <options>
   -A <authtype>  IPMI Lan Auth type (md5, password, or none)
   -a <ipaddr>    IPMI Lan IP to talk to
   -i <ipaddr>    IPMI Lan IP to talk to (deprecated, use -a)
   -p <password>  Password (if required) to control power on
                  IPMI device
   -P             Use Lanplus
   -S <path>      Script to retrieve password (if required)
   -l <login>     Username/Login (if required) to control power
                  on IPMI device
   -o <op>        Operation to perform.
                  Valid operations: on, off, reboot, status
   -t <timeout>   Timeout (sec) for IPMI operation (default 20)
   -C <cipher>    Ciphersuite to use (same as ipmitool -C parameter)
   -M <method>    Method to fence (onoff or cycle (default onoff)
   -V             Print version and exit
   -v             Verbose mode

If no options are specified, the following options will be read
from standard input (one per line):

   auth=<auth>           Same as -A
   ipaddr=<#>            Same as -a
   passwd=<pass>         Same as -p
   passwd_script=<path>  Same as -S
   lanplus               Same as -P
   login=<login>         Same as -u
   option=<op>           Same as -o
   operation=<op>        Same as -o
   action=<op>           Same as -o
   timeout=<timeout>     Same as -t
   cipher=<cipher>       Same as -C
   method=<method>       Same as -M
   verbose               Same as -v


On Thu, Mar 3, 2011 at 12:21 PM, Mika i <mika68vaan at gmail.com> wrote:

> hmm.
> Okey: have someone good installation instructions to get this fence_ipmilan to
> work.
> 1. active IPMI/DCMI over LAN in iLo3
> 2. what should i install in server to get fence_ipmilan to work
> Now if i test connection it shows like this.
>
> ipmitool -v -H 17x.3x.7x.1xx -I lanplus -U admin mc info
> Password:
> Get Auth Capabilities error
> Get Auth Capabilities error
> Error issuing Get Channel Authentication Capabilies request
> Error: Unable to establish IPMI v2 / RMCP+ session
> Get Device ID command failed
>
> Can someone help me!
> 2011/3/2 <Jason_Henderson at mitel.com>
>
>>
>>
>> linux-cluster-bounces at redhat.com wrote on 03/02/2011 10:07:38 AM:
>>
>> > Hi
>>  >
>> > Is there a way to get cluster-suite Fence to work with Rhel 5.5 and iLo3
>> > I have now in both clusters rhel 5.5 version with:
>> > kernel 2.6.18-194.el5
>> > cman-2.0.115-68.el5_6.1
>> >
>> > But in fence state i get allways message: Unable to connect/login to
>> > fencing device
>> >
>> > Any help - or must i update the cluster to rhel 5.6?
>>
>> What fence agent are you using, fence_ilo?
>> You will need to use the fence_ipmilan agent for iLO3.
>> --
>> Linux-cluster mailing list
>> Linux-cluster at redhat.com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20110303/11f2bbd5/attachment.htm>