[linux-lvm] Migration path - 2.2.17 & LVM 0.8final -> 2.4.0 & LVM
Les Hazelton
seawolf at attglobal.net
Fri Jan 19 04:22:32 UTC 2001
Tom,
Thanks for the reply, and the advice about a backup kernel. I followed
your example and it all went rather smoothly. There was another post
suggesting I try the LVM rpm files from Connectiva and I did that at
first but could not make it work. I obviously did something wrong or
incompletely.
I removed those rpm packages and completed your path with the "make
install" for the 0.9.1 user space tools, built the required
lvmcreate_initrd file for the 2.4.0 kernel and did a reboot.
The first time there were a couple of error messages about the lvm
config data being in the wrong format but the system came up anyway. I
did another re-boot and this time it come up cleanly.
I have tried creating, using and removing a few test LVs and all of that
appears to be working correctly.
So far, much easier than I expected. Many thanks to all.
Les
Tom Dawes-Gamble wrote:
>
> Hi,
> Although not quite the same upgrade that you are doing. I have just
> a good trouble free conversion to 0.9.1_beta1. From 0.8-pre02.10.1999
> and Kernel 2.2.16 to 2.2.18.
>
> First I made sure I had a separate bootable emergency
> partition just in casse things went badly wrong. :-)
> (then I could activate the vg and put back the old tools if required.)
>
> Next I downloaded and unpacked the 2.2.18 tarball.
> Same for lvm 0.9.1_beta1.
>
> Read and follow the README in PATCH.
> Built the kernel.
> Installed the kernel.
> Built the 0.9.1_beta1 tools.
> And now for the sort of point of no return.
> Installed the 0.9.1_beta1 tools.
>
> Now you have tools that don't work withthe running kernel. :-(
>
> Now boot the new kernel.
>
> That didn't go clean for me. So I was droped to the shell prompt
> during fsck.
>
> I just ran a vgscan it rebuilt my /etc/lvmtab and then I ran vgchange -a y
> the vg activated NP.
>
> exit from the shell causes a reboot.
>
> Boot the new kernel again and this time it comes up clean.
>
> Note:- I only have vgchange in my rc.sysinit not vgsacn and vgchange.
> I seem to remember that the docs say you should have both so may be
> It's a good idea as my system would have started clean if I had followed
> that. However, I don't upgrade LVM that often so I think overall it's
> faster to not do the vgscan. :-)
>
> Tom.
>
> On Thu Jan 18 22:05:26 2001 Les Hazelton wrote:-
> >
> > My current workstation is running Linux Mandrake 7.2. It has a 2.2.17
> > kernel patched with lvm-0.8final-2.2.16TL.patch.
> >
> > Most of the system is reiserfs created on lvm devices. In fact, the
> > only part of the system that is not reiserfs/lvm is the /boot tree as
> > you can see:
> >
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/lvg01/slash 600M 268M 332M 45% /
> > /dev/hda1 45M 4.4M 39M 10% /boot
> > /dev/lvg01/home 1.0G 133M 891M 13% /home
> > /dev/lvg01/usr 2.0G 1.3G 752M 63% /usr
> > /dev/lvg01/src 700M 249M 451M 36% /usr/src
> > /dev/lvg01/local 1.0G 537M 487M 52% /usr/local
> > /dev/lvg01/var 300M 123M 177M 41% /var
> > /dev/lvg01/mp3 1.5G 1.4G 110M 93% /mp3
> > /dev/lvg01/pictures 1.0G 38M 986M 4% /pictures
> > /dev/lvg01/wine 1.0G 32M 992M 3% /wine
> >
> >
> > I want to migrate to the source from
> >
> > kernel-headers-2.4.0-5mdk.i586.rpm
> > kernel-source-2.4.0-5mdk.i586.rpm
> >
> > patched with lvm_0.9.1_beta2.tar.gz.
> >
> > The problem is, I am not sure of the implementation order. i.e., should
> > I first try to add the 0.9.1 user space tools and then the new kernel.
> > Or, should I try to add a 0.9.1 patch to the current kernel before
> > switching to the new 2.4.0 kernel etc...
> >
> > As you can see, I am a bit confused. I would appreciate some words of
> > guidance from anyone that has already done something similar
> > (successfully).
> >
> > --
> >
> > Good Journey, longevity and prosperity to all
> >
> > Les Hazelton
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm at sistina.com
> > http://lists.sistina.com/mailman/listinfo/linux-lvm
> >
>
> --
> char *r,*e,*w="%.9s%.7s%.7s\n";extern int printf(const char*,...);int main(){
> int l=*w,a,b,th=*(w-~(l/=l))-*(w+l);b=*w+~th--;a=b-th;//Aviation Briefing Ltd.
> r=e=" DISPLAY'tmdg at avbr';,,;'ief.com'*>"+b;l+=~b,th-=printf(w,e-a,th+e,r);
> r=e=" DISPLAY'http://www.avbrief.com/' *>"-~b,exit(~l-printf(w,e+~a,th+e,r));}
> _______________________________________________
> linux-lvm mailing list
> linux-lvm at sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
--
Good Journey, longevity and prosperity to all
Les Hazelton
More information about the linux-lvm
mailing list