[linux-lvm] VG is not found !
Igor Dumaire
Igor.Dumaire at LTUtech.com
Fri Nov 16 04:53:02 UTC 2001
Hi,
I can see all drives :
# lvmdiskscan
lvmdiskscan -- reading all disks / partitions (this may take a while...)
lvmdiskscan -- /dev/hda1 [ 70.57 MB] Primary LINUX native partition [0x83]
lvmdiskscan -- /dev/hda2 [ 19.07 GB] DOS extended partition [0x05]
lvmdiskscan -- /dev/hda5 [ 2.01 GB] Extended LINUX native partition [0x83]
lvmdiskscan -- /dev/hda6 [ 1.00 GB] Extended LINUX native partition [0x83]
lvmdiskscan -- /dev/hda7 [ 1.00 GB] Extended LINUX native partition [0x83]
lvmdiskscan -- /dev/hda8 [ 517.69 MB] Extended LINUX native partition [0x83]
lvmdiskscan -- /dev/hda9 [ 14.55 GB] Extended LINUX native partition [0x83]
lvmdiskscan -- /dev/hdc1 [ 57.27 GB] Primary LVM partition [0x8E]
lvmdiskscan -- /dev/hdd1 [ 57.27 GB] Primary LVM partition [0x8E]
lvmdiskscan -- /dev/hde1 [ 57.27 GB] Primary LVM partition [0x8E]
lvmdiskscan -- /dev/hdf1 [ 57.27 GB] Primary LVM partition [0x8E]
lvmdiskscan -- /dev/hdg1 [ 57.27 GB] Primary LVM partition [0x8E]
lvmdiskscan -- /dev/hdh1 [ 57.27 GB] Primary LVM partition [0x8E]
lvmdiskscan -- 7 disks
lvmdiskscan -- 0 whole disks
lvmdiskscan -- 0 loop devices
lvmdiskscan -- 0 multiple devices
lvmdiskscan -- 0 network block devices
lvmdiskscan -- 13 partitions
lvmdiskscan -- 6 LVM physical volume partitions
I can see volume group "lvm2" but not "lvm1"
# vgscan
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- found active volume group "lvm2"
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
I can display lvm2 info
# vgdisplay lvm2
--- Volume group ---
VG Name lvm2
VG Access read/write
VG Status available/resizable
VG # 0
MAX LV 255
Cur LV 1
Open LV 1
MAX LV Size 255.99 GB
Max PV 255
Cur PV 3
Act PV 3
VG Size 171.79 GB
PE Size 4.00 MB
Total PE 43977
Alloc PE / Size 43776 / 171.00 GB
Free PE / Size 201 / 804.00 MB
VG UUID Jp3gDv-ib7D-p5te-FFLZ-lNjI-5brK-fzjEM6
but, not lvm1 info !
# vgdisplay lvm1
vgdisplay -- volume group "lvm1" not found
So, What do I do?
Thanks,
Benjamin Scott a écrit :
>
> On Thu, 15 Nov 2001, Igor Dumaire wrote:
> > I had created 2 VG and worked sometime with its. I have stopped the
> > server and at the reboot the first VG have disappeared ! The second it's
> > OK !!
>
> Start with these commands:
>
> lvmdiskscan
> vgscan
> vgdisplay
> vgchange -ay
>
> Do not just blindly try the commands if you are not familiar with them;
> read the manual pages first. Try the '--verbose' switch with each for more
> info.
>
--
Igor Dumaire
www.LTUtech.com - Making Sense of Visual Content
------------------------------------------------
More information about the linux-lvm
mailing list