[linux-lvm] LVM
IT3 Stuart B. Tener, USNR-R
stuart at bh90210.net
Thu Sep 13 10:35:07 UTC 2001
Svetljo:
I did try ramdisk_size = 8192, perhaps 17,000 is the number to try. Some people told me the parameter was "ramdisk = 8192", you say "ramdisk_size = 8192", do you know which is accurate?
Also does it go in the append = "ramdisk_size=8192" or "ramdisk=8192"
Or is it placed into the lilo.conf as a separate entry underneath the append command (or other lilo entry) ramdisk = 8192
Very Respectfully,
Stuart Blake Tener, IT3, USNR-R, N3GWG
Beverly Hills, California
VTU 1904G (Volunteer Training Unit)
stuart at bh90210.net
west coast: (310)-358-0202 P.O. Box 16043, Beverly Hills, CA 90209-2043
east coast: (215)-338-6005 P.O. Box 45859, Philadelphia, PA 19149-5859
Telecopier: (419)-715-6073 fax to email gateway via www.efax.com (it's free!)
JOIN THE US NAVY RESERVE, SERVE YOUR COUNTRY, AND BENEFIT FROM IT ALL.
Thursday, September 13, 2001 2:36 AM
-----Original Message-----
From: linux-lvm-admin at sistina.com [mailto:linux-lvm-admin at sistina.com]On Behalf Of svetljo
Sent: Thursday, September 13, 2001 12:32 AM
To: linux-lvm at sistina.com
Subject: Re: [linux-lvm] LVM
Hi
have you tried to pass to lilo : linux ramdisk_size=8192 or
ramdisk_size=17000
after the lvm How-to you have to have in lilo.conf in the append section
" ramdisk_size=8192 "
>
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Uncompressing.................................................................................................................................................................................................................................................................................done.
>Freeing initrd memory: 869k freed
>VFS: Mounted root (ext2 filesystem).
>attempt to access beyond end of device
>01:00: rw=0, want=8198 x(=0x), limit=8198
>EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=8199, block=8197
>attempt to access beyond end of device
>01:00: rw=0, want=16390 x(=0x), limit=16390
>EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=16387, block=16389
>attempt to access beyond end of device
>01:00: rw=0, want=8198 x(=0x), limit=8198
>EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=8194, block=8197
>reiserfs: checking transaction log (device 03:01) ...
>Using r5 hash to sort names
>ReiserFS version 3.6.25
>VFS: Mounted root (reiserfs filesystem) readonly.
>change_root: old root has d_count=2
>Trying to unmount old root ... okay
>Freeing unused kernel memory: 216k freed
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17519 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17519 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>LVM version 0.9.1_beta3 by Heinz Mauelshagen (25/01/2001)
>lvm -- Module successfully initialized
>clm-6005: writing inode 17393 on readonly FS
>clm-6005: writing inode 17519 on readonly FS
> hdc: hdc1 hdc2 hdc3 hdc4
> hdc: hdc1 hdc2 hdc3 hdc4
>ide-floppy: hdc: I/O error, pc = 28, key = 5, asc = 21, ascq = 0
>end_request: I/O error, dev 16:01 (hdc), sector 0
> hdc: hdc1 hdc2 hdc3 hdc4
>ide-floppy: hdc: I/O error, pc = 28, key = 5, asc = 21, ascq = 0
>end_request: I/O error, dev 16:02 (hdc), sector 0
> hdc: hdc1 hdc2 hdc3 hdc4
>ide-floppy: hdc: I/O error, pc = 28, key = 5, asc = 21, ascq = 0
>end_request: I/O error, dev 16:03 (hdc), sector 0
> hdc: hdc1 hdc2 hdc3 hdc4
>ide-floppy: hdc: I/O error, pc = 28, key = 5, asc = 21, ascq = 0
>end_request: I/O error, dev 16:04 (hdc), sector 0
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6005: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6006: writing inode 17393 on readonly FS
>clm-6005: writing inode 17393 on readonly FS
>SCSI subsystem driver Revision: 1.00
>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: TOSHIBA Model: DVD-ROM SD-R2002 Rev: 1D26
> Type: CD-ROM ANSI SCSI revision: 02
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>Linux Kernel Card Services 3.1.22
> options: [pci] [cardbus] [pm]
>PCI: Found IRQ 11 for device 02:0f.0
>PCI: Sharing IRQ 11 with 00:1f.2
>PCI: Sharing IRQ 11 with 02:0f.1
>PCI: Sharing IRQ 11 with 02:0f.2
>PCI: Found IRQ 11 for device 02:0f.1
>PCI: Sharing IRQ 11 with 00:1f.2
>PCI: Sharing IRQ 11 with 02:0f.0
>PCI: Sharing IRQ 11 with 02:0f.2
>Yenta IRQ list 06d8, PCI irq11
>Socket status: 30000006
>Yenta IRQ list 06d8, PCI irq11
>Socket status: 30000006
>cs: IO port probe 0x0c00-0x0cff: clean.
>cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f 0x4d0-0x4d7
>cs: IO port probe 0x0a00-0x0aff: clean.
>eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw at saw.sw.com.sg> and others
>eth0: OEM i82557/i82558 10/100 Ethernet, 00:20:E0:66:C5:8A, I/O at 0xecc0, IRQ 11.
> Receiver lock-up bug exists -- enabling work-around.
> Board assembly 727095-002, Physical connectors present: RJ45
> Primary interface chip i82555 PHY #1.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0x04f4518b).
> Receiver lock-up workaround activated.
>Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
>Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
>SMSC Super-IO detection, now testing Ports 2F0, 370 ...
>PnPBIOS: Parport found PNPBIOS PNP0401 at io=0378,0778 irq=7 dma=1
>0x378: FIFO is 16 bytes
>0x378: writeIntrThreshold is 8
>0x378: readIntrThreshold is 8
>0x378: PWord is 8 bits
>0x378: Interrupts are ISA-Pulses
>0x378: ECP port cfgA=0x10 cfgB=0x00
>0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>parport0: cpp_daisy: aa5500ff(38)
>parport0: assign_addrs: aa5500ff(38)
>parport0: cpp_daisy: aa5500ff(38)
>parport0: assign_addrs: aa5500ff(38)
>lp0: using parport0 (interrupt-driven).
>
>
>
>Very Respectfully,
>
>Stuart Blake Tener, IT3, USNR-R, N3GWG
>Beverly Hills, California
>VTU 1904G (Volunteer Training Unit)
>stuart at bh90210.net
>west coast: (310)-358-0202 P.O. Box 16043, Beverly Hills, CA 90209-2043
>east coast: (215)-338-6005 P.O. Box 45859, Philadelphia, PA 19149-5859
>
>Telecopier: (419)-715-6073 fax to email gateway via www.efax.com (it's free!)
>
>JOIN THE US NAVY RESERVE, SERVE YOUR COUNTRY, AND BENEFIT FROM IT ALL.
>
>Wednesday, September 12, 2001 7:00 PM
>
>-----Original Message-----
>From: Jason Edgecombe [mailto:jedgecombe at carolina.rr.com]
>Sent: Wednesday, September 12, 2001 6:02 PM
>To: stuart at bh90210.net
>Cc: linux-lvm at sistina.com
>Subject: Re: [linux-lvm] LVM
>
>hi,
>
> according to reiserfs's FAQ:
>http://www.reiserfs.org/faq.html#ReiserFS-as-root
>
>you need the notail option on the /boot partition.
>the fstab might look as follows:
>/dev/hda1 /boot reiserfs defaults,notail 0 0
>/dev/hda2 / reiserfs defaults 0 0
>
>if there isn't the word "notail" in the fourth column of your root fstab
>entry, then you ARE booting with tails.
>
>according the lilo changelog:
>ftp://brun.dyndns.org/pub/linux/lilo/CHANGES
>
>lilo has been able to boot from a reiserfs partition with tail support
>since version 21.6 (Oct. 1, 2000)
>
>*under an rpm-based distro such as redhat or mandrake, "rpm -qi lilo"
>should give you the version. (assuming you haven't downloaded lilo as a
>tarball and compiled it.)
>
>Both were last modified in August 2001, I don't know which to believe.
>For safety sake, I made my /boot ext2. Most recent computers (within the
>past two years) can boot from a partition after the 1024 boundary. I
>just like to make a separate /boot at the beginning of the drive as a
>precaution.
>
>as for the matter of initrd's, this is the way that I understand it:
>in a non-lvm root fs, your root fs type must either be compiled in or in
>the initrd image.
>in a lvm root, you MUST have an initrd even if lvm is compiled into the
>kernel (not as a module) because you need to run a vgchange -ay and you
>need your lvm config files in the initrd.
>
>as for having /boot (booting the kernel) straight in an lvm fs, I have
>no idea.
>
>
>If I am wrong, someone please correct me.
>
>Sincerely,
>Jason Edgecombe
>
>"IT3 Stuart B. Tener, USNR-R" wrote:
>
>> I am curious what version of lilo in fact supports ReiserFS tails. I am running Mandrake 8.0, and using the lilo supplied therewith, and have been booting a / partition as ReiserFS (with tails I believe, how do I check?).
>>
_______________________________________________
linux-lvm mailing list
linux-lvm at sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
More information about the linux-lvm
mailing list