[linux-lvm] Pvmove fails... No free PE's (and lvextend does not work...)

Anders Widman andewid at tnonline.net
Thu Jan 17 15:19:02 UTC 2002


I currently use RedHat 7.2 with kernel 2.4.18-4, but I have tested most kernel versions from 2.4.16. I am also using lvm 1.0.1.

I have tried to move all extents and just a few (or even one) extents with no luck... Could it be that this disk is 120GB (114,44) and there would be some problems with that?

//Anders


2002-01-17 12:32:53, "Heinz J . Mauelshagen" <mauelshagen at sistina.com> wrote:

>
>Hmmm,
>we didn't talk about versions.
>Which Linux/LVM version are you using?
>
>Another point (assuming that you might siffer from an old OBO error):
>does the extent still fail with less than 1221 extents?
>
>Regards,
>Heinz    -- The LVM Guy --
>
>On Wed, Jan 16, 2002 at 10:28:39PM +0100, Anders Widman wrote:
>> Well... here is what the problem is right now.:
>> 
>> First I scan all physical disks to determine where I have free space to grow..
>> 
>> 
>> pvscan -- reading all physical volumes (this may take a while...)
>> pvscan -- ACTIVE   PV "/dev/hdo1" of VG "Server" [55.84 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdp1" of VG "Server" [28.56 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdm1" of VG "Server" [76.28 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdn1" of VG "Server" [76.28 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdk1" of VG "Server" [38.12 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdl1" of VG "Server" [55.84 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdg1" of VG "Server" [55.88 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdh1" of VG "Server" [55.88 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hde1" of VG "Server" [114.44 GB / 38.16 GB free]
>> pvscan -- ACTIVE   PV "/dev/hdf1" of VG "Server" [57.22 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdc1" of VG "Server" [71.53 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdd1" of VG "Server" [71.53 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdb1" of VG "Server" [4.28 GB / 0 free]
>> pvscan -- ACTIVE   PV "/dev/hdb3" of VG "Server" [52.88 GB / 0 free]
>> pvscan -- total: 14 [815.29 GB] / in use: 14 [815.29 GB] / in no VG: 0 [0]
>> 
>> --- Volume group ---
>> VG Name               Server
>> VG Access             read/write
>> VG Status             available/resizable
>> VG #                  0
>> MAX LV                256
>> Cur LV                1
>> Open LV               1
>> MAX LV Size           1.00 TB
>> Max PV                256
>> Cur PV                14
>> Act PV                14
>> VG Size               814.56 GB
>> PE Size               32.00 MB
>> Total PE              26066
>> Alloc PE / Size       24845 / 776.41 GB
>> Free  PE / Size       1221 / 38.16 GB
>> VG UUID               ElJLCd-ln4W-k3YA-yg8W-HmVU-gs0O-mcR0pA
>> 
>> --- Physical volume ---
>> PV Name               /dev/hde1
>> VG Name               Server
>> PV Size               114.50 GB / NOT usable 62.91 MB [LVM: 142.00 KB]
>> PV#                   13
>> PV Status             available
>> Allocatable           yes
>> Cur LV                1
>> PE Size (KByte)       32768
>> Total PE              3662
>> Free PE               1221
>> Allocated PE          2441
>> PV UUID               7ScWsg-0vX4-ccX3-W1sO-mFnz-0Sl0-gDWKmM
>> 
>> -----------------------------------------------------------------------
>> 
>> 
>> Now I use "lvextend -l +1221 /dev/Server/FTPRoot /dev/hde1" to grow my LV "FTPRoot". It worked fine on my new disk (to wich I also moved the old PE's from the bad disk), but not on this one. 
What 
>> can be the problem. Where should I even begin to look?
>> 
>> lvextend -- extending logical volume "/dev/Server/FTPRoot" to 814.56 GB
>> lvextend -- not enough free/allocatable physical extents to extend logical volume /dev/Server/FTPRoot
>> 
>> Thanks for any help!
>> 
>> //Anders
>> 
>> 
>> 2002-01-16 19:28:03, Anders Widman <andewid at tnonline.net> wrote:
>> 
>> >No, my LV is not striped, so this should have worked. Well.. I have bought another disk and will move all pe's to that one instead. Hopefully this will work better.
>> >
>> >//Anders
>> >
>> >2002-01-16 16:08:44, "Heinz J . Mauelshagen" <mauelshagen at sistina.com> wrote:
>> >
>> >>
>> >>Anders,
>> >>
>> >>is your LV striped? In this case, pvmove complains because it can't
>> >>move 2 stripes onto one PV.
>> >>
>> >>If so, you need another disk to be pvcreated/vgextend to your VG in order
>> >>to pvmove data over.
>> >>
>> >>On Wed, Jan 16, 2002 at 07:52:18AM +0100, Anders Widman wrote:
>> >>> I have a bad disk (hdl1) that needs to be replaced. It is 40GB, or 1220 PE's. I have another disk which is about 120GB, but has 1221 free PE's. Both disks are in the same VG, Server and the same 
LV, 
>> >>> FTPRoot. When I try "pvmove -v /dev/hdl1" it failes (doesn't even start, really) and tells me I haven't any free PE's.
>> >>> 
>> >>> What can I have missed...
>> >>> 
>> >>> 1) I shrick the filesystem first with about 60GB
>> >>> 2) I use lvreduce to shrick the LV with about 59GB
>> >>> 3) I tried "pvmove -v /dev/hdl" to move all PE's on this 40GB disk to the free ones on the other disks. This should have worked, shoudln't it?
>> >>> 
>> >>> have I missed something critical?
>> >>> 
>> >>> //Anders
>> >>> 
>> >>> 
>> >>> 
>> >>> _______________________________________________
>> >>> linux-lvm mailing list
>> >>> linux-lvm at sistina.com
>> >>> http://lists.sistina.com/mailman/listinfo/linux-lvm
>> >>> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>> >>
>> >>-- 
>> >>
>> >>Regards,
>> >>Heinz    -- The LVM Guy --
>> >>
>> >>*** Software bugs are stupid.
>> >>    Nevertheless it needs not so stupid people to solve them ***
>> >>
>> >>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>> >>
>> >>Heinz Mauelshagen                                 Sistina Software Inc.
>> >>Senior Consultant/Developer                       Am Sonnenhang 11
>> >>                                                  56242 Marienrachdorf
>> >>                                                  Germany
>> >>Mauelshagen at Sistina.com                           +49 2626 141200
>> >>                                                       FAX 924446
>> >>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>> >>
>> >>_______________________________________________
>> >>linux-lvm mailing list
>> >>linux-lvm at sistina.com
>> >>http://lists.sistina.com/mailman/listinfo/linux-lvm
>> >>read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >linux-lvm mailing list
>> >linux-lvm at sistina.com
>> >http://lists.sistina.com/mailman/listinfo/linux-lvm
>> >read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>> >
>> >
>> 
>> 
>> 
>> 
>> _______________________________________________
>> linux-lvm mailing list
>> linux-lvm at sistina.com
>> http://lists.sistina.com/mailman/listinfo/linux-lvm
>> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>
>*** Software bugs are stupid.
>    Nevertheless it needs not so stupid people to solve them ***
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>Heinz Mauelshagen                                 Sistina Software Inc.
>Senior Consultant/Developer                       Am Sonnenhang 11
>                                                  56242 Marienrachdorf
>                                                  Germany
>Mauelshagen at Sistina.com                           +49 2626 141200
>                                                       FAX 924446
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>_______________________________________________
>linux-lvm mailing list
>linux-lvm at sistina.com
>http://lists.sistina.com/mailman/listinfo/linux-lvm
>read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>
>







More information about the linux-lvm mailing list