[linux-lvm] vgscan errors with 1.0.3
Anand Kumria
wildfire at progsoc.uts.edu.au
Tue Mar 5 13:25:02 UTC 2002
Hi there,
I recently add a metadevice to my existing LVM setup. Basically I
copied the data (use tar) from one LV to another and removed the
original LV (and associated PV).
A few reboots later (where things were working) and I decided to
do an lvrename. Upon rebooting vgscan complains that it "can't
get data of volume group 'caliban' from physical volumes".
This is somewhat disturbing.
I have checked the archives and have also attached an lvmdiskscan
and confirmed I have some free space in / (only 2.4M, but still).
I would have attached the output from 'pvdata -a /dev/md0' and
'vgscan -d -d' however they are large files, instead I've made it
available at <URL: http://www.progsoc.org/~wildfire/lvm/> along
with my other files.
I am using Linux 2.4.16 and LVM tools 1.0.3 (all the work was done
using this version of the tools). Here is some of the output:
Script started on Wed Mar 6 05:31:49 2002
(none):~# cat /proc/sys/kernel/tainted
0
(none):~# uname -a
Linux (none) 2.4.16 #4 SMP Tue Feb 26 00:15:49 EST 2002 i686 unknown
(none):~# pvscan --version
pvscan: Logical Volume Manager 1.0.3
Heinz Mauelshagen, Sistina Software 19/02/2002 (IOP 10)
(none):~# pvscan
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- inactive PV "/dev/md0" is associated to unknown VG "caliban" (run vgscan)
pvscan -- WARNING: physical volume "/dev/hdg" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/hde" belongs to a meta device
pvscan -- total: 3 [111.80 GB] / in use: 3 [111.80 GB] / in no VG: 0 [0]
(none):~# vgscan --version
vgscan: unrecognized option `--version'
Logical Volume Manager 1.0.3
Heinz Mauelshagen, Sistina Software 19/02/2002 (IOP 10)
vgscan -- scan for available volume groups for use by LVM
vgscan [-d|--debug]
[-f/--force_numbers]
[-h/--help]
[-r/--remove_snapshots [VgNameToRemoveSnapshotsFrom]]
[-v/--verbose]
(none):~# vgscan
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- ERROR "vg_read_with_pv_and_lv(): current PV" can't get data of volume group "caliban" from physical volume(s)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
(none):~# pvdisplay /dev/md0
--- Physical volume ---
PV Name /dev/md0
VG Name caliban
PV Size 111.80 GB [234462464 secs] / NOT usable 3.62 MB [LVM: 232 KB]
PV# 4
PV Status available
Allocatable yes
Cur LV 2
PE Size (KByte) 4096
Total PE 28620
Free PE 9576
Allocated PE 19044
PV UUID Wmmzbe-bxjy-auNC-ViiX-mQfW-4srb-Y3kMFy
(none):~# lvmdiskscan
lvmdiskscan -- reading all disks / partitions (this may take a while...)
lvmdiskscan -- /dev/md0 [ 111.80 GB] free meta device
lvmdiskscan -- /dev/hdg [ 55.90 GB] free whole disk
lvmdiskscan -- /dev/hde [ 55.90 GB] free whole disk
lvmdiskscan -- /dev/hdf [ 55.90 GB] free whole disk
lvmdiskscan -- /dev/hda1 [ 1.91 GB] Primary LINUX native partition [0x83]
lvmdiskscan -- /dev/hda2 [ 122.06 MB] Primary [0x82]
lvmdiskscan -- /dev/hda3 [ 5.72 GB] Primary LINUX native partition [0x83]
lvmdiskscan -- /dev/hda4 [ 4.38 GB] Primary LINUX native partition [0x83]
lvmdiskscan -- 4 disks
lvmdiskscan -- 3 whole disks
lvmdiskscan -- 0 loop devices
lvmdiskscan -- 1 multiple device
lvmdiskscan -- 0 network block devices
lvmdiskscan -- 4 partitions
lvmdiskscan -- 0 LVM physical volume partitions
(none):~# exit
Script done on Wed Mar 6 05:32:39 2002
What concerns me about this output is that it thinks that /dev/md0 is *free*
whereas pvdisplay knows it is not. If you have any suggestions, please let
me know.
Thanks,
Anand
--
`` We are shaped by our thoughts, we become what we think.
When the mind is pure, joy follows like a shadow that never
leaves. '' -- Buddha, The Dhammapada
More information about the linux-lvm
mailing list