[linux-lvm] vgcreate not working
Heinz J . Mauelshagen
mauelshagen at sistina.com
Mon Mar 11 09:32:04 UTC 2002
On Sun, Mar 10, 2002 at 03:39:09PM +0000, Vincent AE Scott wrote:
> Laurentiu Simion(lsimion at rogers.com)@Sun, Mar 10, 2002 at 10:17:30AM -0500:
> > What's the output of pvscan?
> >
>
>
> [root at box guest]# pvscan
> pvscan -- reading all physical volumes (this may take a while...)
> pvscan -- inactive PV "/dev/ide/host2/bus1/target0/lun0/disc" is in no
> VG [28.63 GB]
> pvscan -- inactive PV "/dev/ide/host2/bus0/target0/lun0/disc" is in no
> VG [28.63 GB]
> pvscan -- total: 2 [57.26 GB] / in use: 0 [0] / in no VG: 2 [57.26 GB]
>
>
> note: i've switched over from using partitions, to entire disks.
>
> just tried using the long devfs names, as printed above and it works fine!
> argggh. thats me being dumb.
No, not really.
Need to do something about it, so that LVM can cope with both dev pathes.
Regards,
Heinz -- The LVM Guy --
>
>
> -vince
> /me goes back to hiding in the corner.
>
>
> > Laurentiu
> >
> > On Sun, 2002-03-10 at 10:04, Vincent AE Scott wrote:
> > >
> > > Hi there,
> > >
> > > i have a problem with some newly partioned up disks, i've created two
> > > LVM partions on two different disks. upon executing the following
> > > commands, vgcreate fails:
> > >
> > > [root at box guest]# pvcreate /dev/hde2
> > > pvcreate -- physical volume "/dev/hde2" successfully created
> > >
> > > [root at box guest]# pvcreate /dev/hdg2
> > > pvcreate -- physical volume "/dev/hdg2" successfully created
> > >
> > > [root at box guest]# vgcreate vg /dev/hde2 /dev/hdg2
> > > vgcreate -- no valid physical volumes in command line
> > >
> > >
> > > here's a snipit from the tail end of vgcreate -d:
> > >
> > > <1> pv_read_all_pv -- calling stat with "/dev/loop/7"
> > > <22> pv_read -- CALLED with /dev/loop/7
> > > <333> pv_check_name -- CALLED with "/dev/loop/7"
> > > <4444> lvm_check_chars -- CALLED with name: "/dev/loop/7"
> > > <4444> lvm_check_chars -- LEAVING with ret: 0
> > > <333> pv_check_name -- LEAVING with ret: 0
> > > <22> pv_read -- going to read /dev/loop/7
> > > <22> pv_read -- LEAVING with ret: -282
> > > <1> pv_read_all_pv -- pv_read returned: -282
> > > <1> pv_read_all_pv -- avoiding multiple entries in case of MD; np: 2
> > > <1> pv_read_all_pv -- LEAVING with ret: 0
> > > <1> pv_check_name -- CALLED with "/dev/hde2"
> > > <22> lvm_check_chars -- CALLED with name: "/dev/hde2"
> > > <22> lvm_check_chars -- LEAVING with ret: 0
> > > <1> pv_check_name -- LEAVING with ret: 0
> > > <1> pv_check_name -- CALLED with "/dev/hdg2"
> > > <22> lvm_check_chars -- CALLED with name: "/dev/hdg2"
> > > <22> lvm_check_chars -- LEAVING with ret: 0
> > > <1> pv_check_name -- LEAVING with ret: 0
> > > vgcreate -- no valid physical volumes in command line
> > >
> > >
> > >
> > > Now, the only thing i can think of, is this disk *used* to have an LVM
> > > on it, (vg+lv) but i have since removed it from the disk, in favour of
> > > this new attempt. i cant see how it could possibly be a problem, but
> > > maybe there's something lurking in the FS.
> > >
> > >
> > > Does anyone have any dieas whats wrong?
> > > im running lvm 1.0.3 on 2.4.18
> > >
> > >
> > >
> > > --
> > > PGP key: http://codex.net/pgp/pgp.asc
> > >
> > > C:\> File not found. Should I fake it? (Y/N)
> > >
> > >
> > > _______________________________________________
> > > linux-lvm mailing list
> > > linux-lvm at sistina.com
> > > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
> >
> >
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm at sistina.com
> > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
>
> --
> PGP key: http://codex.net/pgp/pgp.asc
>
> 2 + 2 = 5 for extremely large values of 2.
>
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm at sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen at Sistina.com +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
More information about the linux-lvm
mailing list