[linux-lvm] pvmove problem
Heinz J . Mauelshagen
mauelshagen at sistina.com
Thu Jun 5 05:45:02 UTC 2003
Tim,
have you tried 'pvmove -i ...' yet ?
That tries to work arround read errors on flaky devices and read as much
data as possible.
Regards,
Heinz -- The LVM Guy --
On Wed, Jun 04, 2003 at 11:57:45AM -0400, Tim Randles wrote:
> Hello,
>
> I'm trying to pvmove from a dying disk to a new disk. I'm using version 1.0.7
> of the LVM tools. I know that the source disk has bad sectors on it. I
> figured one of two things would happen with the pvmove:
> 1) pvmove would work fine up to the bad sectors, where it would error with
> I/O read errors. I would then restart the pvmove with PEs that are past the
> bad sectors on the source disk and things would finish.
> 2) pvmove would work fine up to the bad sectors, where it would encounter I/O
> read errors. pvmove would report the errors and say the data is
> lost/corrupt, but continue reading valid/skipping bad sectors until it
> finished.
> I fear that I'm being naive about how pvmove will handle bad sectors... At
> any rate, the error I'm getting is:
>
> [root at mills tools]# ./pvmove -vv /dev/sdb1
> pvmove -- checking name of source physical volume "/dev/sdb1"
> pvmove -- locking logical volume manager
> pvmove -- reading data of source physical volume from "/dev/sdb1"
> pvmove -- checking volume group existence
> pvmove -- reading data of volume group "vg1" from lvmtab
> pvmove -- checking volume group consistency of "vg1"
> pvmove -- searching for source physical volume "/dev/sdb1" in volume group
> "vg1"
> pvmove -- building list of possible destination physical volumes
> pvmove -- checking volume group activity
> pvmove -- moving physical extents in active volume group "vg1"
> pvmove -- WARNING: if you lose power during the move you may need
> to restore your LVM metadata from backup!
> pvmove -- do you want to continue? [y/n] y
> pvmove -- starting to move extents away from physical volume "/dev/sdb1"
> pvmove -- checking for enough free physical extents in "vg1"
> lv: /dev/vg1/lv7[7] old_dev: 08:17 new_dev: 08:33 old_pe_sector: 4186488
> new_pe_sector: 4186488
> pvmove -- opening output physical volume "/dev/sdc1"
> pvmove -- llseeking input physical volume "/dev/sdb1"
> pvmove -- llseeking output physical volume "/dev/sdc1"
> pvmove -- /dev/sdb1 [PE 510 [lv7 [LE 5650]] -> /dev/sdc1 [PE 510] [1/4590]
> pvmove -- locking physical extent 510 of "/dev/sdb1" in kernel
> pvmove -- about to read input physical volume "/dev/sdb1" and to write output
> physical volume "/dev/sdc1"
> pvmove -- ERROR reading input physical volume "/dev/sdb1" (still 131072 bytes
> to read)
> pvmove -- ERROR "pv_move_pe(): read input PV" moving physical extents
>
>
> When I try to specify any random PE > 510 I get:
>
>
> [root at mills tools]# ./pvmove -vv /dev/sdb1:530 /dev/sdc1
> pvmove -- checking name of source physical volume "/dev/sdb1"
> pvmove -- locking logical volume manager
> pvmove -- reading data of source physical volume from "/dev/sdb1"
> pvmove -- checking volume group existence
> pvmove -- reading data of volume group "vg1" from lvmtab
> pvmove -- checking volume group consistency of "vg1"
> pvmove -- searching for source physical volume "/dev/sdb1" in volume group
> "vg1"
> pvmove -- building list of possible destination physical volumes
> pvmove -- checking destination physical volume names in command line
> pvmove -- checking volume group activity
> pvmove -- moving physical extents in active volume group "vg1"
> pvmove -- WARNING: if you lose power during the move you may need
> to restore your LVM metadata from backup!
> pvmove -- do you want to continue? [y/n] y
> pvmove -- starting to move extents away from physical volume "/dev/sdb1"
> pvmove -- checking for enough free physical extents in "vg1"
> lv: /dev/vg1/lv7[7] old_dev: 08:17 new_dev: 08:33 old_pe_sector: 4350328
> new_pe_sector: 4186488
> pvmove -- opening output physical volume "/dev/sdc1"
> pvmove -- llseeking input physical volume "/dev/sdb1"
> pvmove -- llseeking output physical volume "/dev/sdc1"
> pvmove -- /dev/sdb1 [PE 530 [lv7 [LE 5670]] -> /dev/sdc1 [PE 510] [1/1]
> pvmove -- locking physical extent 530 of "/dev/sdb1" in kernel
> pvmove -- about to read input physical volume "/dev/sdb1" and to write output
> physical volume "/dev/sdc1"
> pvmove -- ERROR reading input physical volume "/dev/sdb1" (still 4194304 bytes
> to read)
> pvmove -- ERROR "pv_move_pe(): read input PV" moving physical extents
>
>
> Is there anything I can do to get the pvmove to finish?
>
> Thanks,
> Tim
>
> --
> Tim Randles
> Unix Administrator and Webmaster
> The Ohio State University
> Department of Physics Computing Facility
> Phone: 292-2630
> Email: tcr at pacific.mps.ohio-state.edu
> PGP key: http://www.physics.ohio-state.edu/~tcr/pgp.txt
>
>
>
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm at sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen at Sistina.com +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
More information about the linux-lvm
mailing list