[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] Mirror between different SAN fabrics

Actually, I'm quite surprised that this approach mangles the lvm data. It seems that when you do a pvcreate on a block device, LVM should (and I think, does) write the lvm metadata in a region of that device, and then never let anything touch that metadata. This way, if you do a 'dd if=/dev/zeros of=<PV-DEVICE>' it blanks out the device, but the metadata is intact.

So, if you do a 'pvcreate' on an LV, it should contain a second copy of the metadata, unique and independent from the first copy on the original block device. My tests on this has worked fine (although my tests have been for building two VGs that have striped volumes across the member disks, and then a VG that creates a mirrored LV of the striped volumes, so no multipathing is involved). I'm wondering if we can compare notes to see if I'm doing something that makes it look like it's working -- I don't want to be quietly destroying my lvm data and not knowing it!!!

I'm doing (roughly, block devices are a bit made-up):

# prepare the physical volumes
pvcreate /dev/sda
pvcreate /dev/sdb
pvcreate /dev/sdc
pvcreate /dev/sdd
pvcreate /dev/sde

# Create volume groups to contain uniquely striped volumes
vgcreate Stripe1VG /dev/sda /dev/sdb
vgcreate Stripe2VG /dev/sdc /dev/sdd

# Create the striped volumes
lvcreate -i 2 -n Stripe1LV -L 1G Stripe1VG
lvcreate -i 2 -n Stripe2LV -L 1G Stripe2VG

# Make the striped volumes into PVs
pvcreate /dev/Stripe1VG/Stripe1LV
pvcreate /dev/Stripe2VG/Stripe2LV

# Create the volume group for mirrored volumes
vgcreate MirrorVG /dev/Stripe1VG/Stripe1LV /dev/Stripe2VG/Stripe2LV /dev/sde
# (Had to use three PVs to have the mirror log in place)

# Create the mirrored volume
lvcreate -m 1 -n Mirror1LV -L 500M MirrorVG

# Filesystem, test, etc. this will be GFS eventually, but testing with ext3 for now.
mke2fs -j -i16384 -v /dev/MirrorVG/Mirror1LV
mkdir /mnt/mirror1lv
mount /dev/MirrorVG/Mirror1LV /mnt/mirror1

Is that about your procedure as well?  When does the lvm data get mangled?

(Sorry if this is going off topic - but if this is solvable it might actually answer the original question...)


Matt P wrote:
This is basically the "messy" way I mentioned in my reply above. I
found if you pvcreate the  LV device, you end up mangling the lvm data
(this probably comes as little surprise) and it breaks down after
that. So, I ended up using losetup and an "image file", one for/on
each fabric. Then did pvcreate on each loop device, and made a new VG
containing both PVs and created the LV with mirroring.... It
worked.... I did no performance, stability, or failure testing...

 Ty! Boyack
 NREL Unix Network Manager
 ty nrel colostate edu
 (970) 491-1186

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]