[linux-lvm] multipath works; lvm on multipath does not
malahal at us.ibm.com
malahal at us.ibm.com
Thu Jul 16 00:53:22 UTC 2009
Brain,
Your 'dmsetup table' output didn't seem to correspond to this 'lvs'
command output. Your 'dmsetup table' command has this entry:
mb1_t1-bin: 0 41943040 striped 4 128 8:0 384 8:16 384 8:32 384 8:48 384
That clearly says your 'mb1_t1/bin' volume is triped across devices with
major:minor numbers as 8:0, 8:16, 8:32, 8:48. The major number 8
normally belongs to sd driver that controls single paths. Your 'lvs ..."
output shows that it should be stripped across
zimbra-mb1-t1-v1_fujitsu1-lun55 and others.
Your "pvs" showed multipath PV names in your first email. I believe,
something changed when you posted your "dmsetup ls" and "dmsetup table"
commands.
--Malahal.
PS: Does your 'dmsetup table' now show the same output as before?
Brian Elliott Finley [finley at anl.gov] wrote:
> Malahal,
>
> Here is the output from the command you suggested (I'm sure I'll be
> using that one again -- quite handy):
>
> root at zimbra-mb1:~# lvs -o lv_name,vg_name,devices
> LV VG Devices
>
>
>
> bin mb1_t1
> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55(0),/dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56(0),/dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57(0),/dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58(0)
>
> db mb1_t1
> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55(2560),/dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56(2560),/dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57(2560),/dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58(2560)
>
> index mb1_t1
> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55(5760),/dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56(5760),/dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57(5760),/dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58(5760)
>
> log mb1_t1
> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55(1280),/dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56(1280),/dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57(1280),/dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58(1280)
>
> redo mb1_t1
> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55(12160),/dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56(12160),/dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57(12160),/dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58(12160)
> store mb1_t1
> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55(21760),/dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56(21760),/dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57(21760),/dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58(21760)
> hsm_store1 mb1_t2 /dev/mapper/zimbra-mb1-t2-v1_fujitsu1-lun63(0)
>
>
>
> hsm_store2 mb1_t2 /dev/mapper/zimbra-mb1-t2-v2_fujitsu1-lun64(0)
>
>
>
> hsm_store2 mb1_t2 /dev/mapper/zimbra-mb1-t2-v5_fujitsu1-lun67(0)
>
>
>
> hsm_store3 mb1_t2
> /dev/mapper/zimbra-mb1-t2-v5_fujitsu1-lun67(3001)
>
>
> hsm_store3 mb1_t2 /dev/mapper/zimbra-mb1-t2-v6_fujitsu1-lun68(0)
>
>
>
> home zimbra-mb1 /dev/md1(832)
>
>
>
> root zimbra-mb1 /dev/md1(512)
>
>
>
> swap zimbra-mb1 /dev/md1(416)
>
>
>
> tmp zimbra-mb1 /dev/md1(1152)
>
>
>
> var zimbra-mb1 /dev/md1(1472)
>
>
> -Brian
>
>
> malahal at us.ibm.com wrote:
> > Try running "lvs -o lv_name,vg_name,devices". It will list your logical
> > volumes and their backing devices. I also found that your stripes are on
> > single path devices as Chandra found.
> >
> > Maybe a problem with your filter???
> >
> > --Malahal.
> >
> > Chandra Seetharaman [sekharan at us.ibm.com] wrote:
> >> Hi Brian,
> >>
> >> which of these are your LVM volumes ?
> >>
> >> Perusal of "dmsetup table" shows you do not have your LVM volumes on top
> >> of multipath devices. (I an elaborate on it once I get your answer for
> >> the question above)
> >>
> >> chandra
> >> On Wed, 2009-07-15 at 17:22 -0500, Brian E. Finley wrote:
> >>> Chandra,
> >>>
> >>> root at zimbra-mb1:~# dmsetup ls
> >>> mb1_t1-redo (254, 4)
> >>> zimbra-mb1-t2-v6_fujitsu1-lun68 (254, 29)
> >>> zimbra--mb1-home (254, 19)
> >>> zimbra-mb1-t2-v5_fujitsu1-lun67 (254, 24)
> >>> mb1_t1-bin (254, 0)
> >>> zimbra-mb1-t2-v4_fujitsu1-lun66 (254, 6)
> >>> zimbra--mb1-var (254, 21)
> >>> mb1_t2-hsm_store3 (254, 12)
> >>> zimbra-mb1-t2-v3_fujitsu1-lun65 (254, 28)
> >>> zimbra-mb1-t2-v2_fujitsu1-lun64 (254, 26)
> >>> mb1_t2-hsm_store2 (254, 10)
> >>> zimbra--mb1-swap (254, 17)
> >>> zimbra-mb1-t2-v1_fujitsu1-lun63 (254, 25)
> >>> zimbra--mb1-root (254, 18)
> >>> 35000c5000b36aa2b (254, 11)
> >>> mb1_t2-hsm_store1 (254, 7)
> >>> mb1_t1-store (254, 5)
> >>> mb1_t1-db (254, 2)
> >>> mb1_t1-log (254, 1)
> >>> 35000c5000b15fe7b-part2 (254, 14)
> >>> 35000c5000b15fe7b-part1 (254, 13)
> >>> zimbra-mb1-t1-v4_fujitsu1-lun58 (254, 9)
> >>> zimbra-mb1-t1-v3_fujitsu1-lun57 (254, 22)
> >>> zimbra-mb1-t1-v2_fujitsu1-lun56 (254, 27)
> >>> zimbra-mb1-t1-v1_fujitsu1-lun55 (254, 23)
> >>> 35000c5000b36aa2b-part2 (254, 16)
> >>> 35000c5000b15fe7b (254, 8)
> >>> 35000c5000b36aa2b-part1 (254, 15)
> >>> zimbra--mb1-tmp (254, 20)
> >>> mb1_t1-index (254, 3)
> >>>
> >>>
> >>> root at zimbra-mb1:~# dmsetup table
> >>> mb1_t1-redo: 0 314572800 striped 4 128 8:0 99615104 8:16 99615104 8:32 99615104 8:48 99615104
> >>> zimbra-mb1-t2-v6_fujitsu1-lun68: 0 491911168 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 66:112 1000 8:144 1000 65:48 1000 65:208 1000
> >>> zimbra--mb1-home: 0 20971520 linear 9:1 54526336
> >>> zimbra-mb1-t2-v5_fujitsu1-lun67: 0 743178240 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 65:32 1000 8:128 1000 65:192 1000 66:96 1000
> >>> mb1_t1-bin: 0 41943040 striped 4 128 8:0 384 8:16 384 8:32 384 8:48 384
> >>> zimbra-mb1-t2-v4_fujitsu1-lun66: 0 409600000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 8:112 1000 65:16 1000 65:176 1000 66:80 1000
> >>> zimbra--mb1-var: 0 41943040 linear 9:1 96469376
> >>> mb1_t2-hsm_store3: 0 718585856 linear 65:192 24584576
> >>> mb1_t2-hsm_store3: 718585856 329990144 linear 65:208 384
> >>> zimbra-mb1-t2-v3_fujitsu1-lun65: 0 409600000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 8:96 1000 65:0 1000 65:160 1000 66:64 1000
> >>> zimbra-mb1-t2-v2_fujitsu1-lun64: 0 1024000000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 66:48 1000 8:80 1000 8:240 1000 65:144 1000
> >>> mb1_t2-hsm_store2: 0 1023991808 linear 8:240 384
> >>> mb1_t2-hsm_store2: 1023991808 24584192 linear 65:192 384
> >>> zimbra--mb1-swap: 0 6291456 linear 9:1 27263360
> >>> zimbra-mb1-t2-v1_fujitsu1-lun63: 0 1056964608 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 8:64 1000 8:224 1000 65:128 1000 66:32 1000
> >>> zimbra--mb1-root: 0 20971520 linear 9:1 33554816
> >>> 35000c5000b36aa2b: 0 286739329 multipath 0 0 1 1 round-robin 0 1 1 66:144 1000
> >>> mb1_t2-hsm_store1: 0 1048576000 linear 8:224 384
> >>> mb1_t1-store: 0 419430400 striped 4 128 8:0 178258304 8:16 178258304 8:32 178258304 8:48 178258304
> >>> mb1_t1-db: 0 104857600 striped 4 128 8:0 20971904 8:16 20971904 8:32 20971904 8:48 20971904
> >>> mb1_t1-log: 0 41943040 striped 4 128 8:0 10486144 8:16 10486144 8:32 10486144 8:48 10486144
> >>> 35000c5000b15fe7b-part2: 0 286326495 linear 254:8 401625
> >>> 35000c5000b15fe7b-part1: 0 401562 linear 254:8 63
> >>> zimbra-mb1-t1-v4_fujitsu1-lun58: 0 409600000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 8:48 1000 8:208 1000 65:112 1000 66:16 1000
> >>> zimbra-mb1-t1-v3_fujitsu1-lun57: 0 409600000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 65:96 1000 8:32 1000 8:192 1000 66:0 1000
> >>> zimbra-mb1-t1-v2_fujitsu1-lun56: 0 409600000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 8:176 1000 8:16 1000 65:80 1000 65:240 1000
> >>> zimbra-mb1-t1-v1_fujitsu1-lun55: 0 409600000 multipath 1 queue_if_no_path 0 1 1 round-robin 0 4 1 8:0 1000 8:160 1000 65:64 1000 65:224 1000
> >>> 35000c5000b36aa2b-part2: 0 286326495 linear 254:11 401625
> >>> 35000c5000b15fe7b: 0 286739329 multipath 0 0 1 1 round-robin 0 1 1 66:128 1000
> >>> 35000c5000b36aa2b-part1: 0 401562 linear 254:11 63
> >>> zimbra--mb1-tmp: 0 20971520 linear 9:1 75497856
> >>> mb1_t1-index: 0 209715200 striped 4 128 8:0 47186304 8:16 47186304 8:32 47186304 8:48 47186304
> >>>
> >>>
> >>> Thanks, -Brian
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Chandra Seetharaman" <sekharan at us.ibm.com>
> >>> To: "Brian Elliott Finley" <finley at anl.gov>, "LVM general discussion and development" <linux-lvm at redhat.com>
> >>> Sent: Wednesday, July 15, 2009 5:11:47 PM GMT -06:00 US/Canada Central
> >>> Subject: Re: [linux-lvm] multipath works; lvm on multipath does not
> >>>
> >>> Can you send the o/p of "dmsetup ls" and "dmsetup table"
> >>>
> >>> On Wed, 2009-07-15 at 16:53 -0500, finley at anl.gov wrote:
> >>>> How can I tell what is causing LVM on multipath volumes to fail, while direct multipath volumes are working?
> >>>>
> >>>>
> >>>> The details:
> >>>>
> >>>> I have several volumes that are multipathed over fibre channel (2 qlogic cards in the host) from a Fujitsu Eternus 4000 (4 controllers).
> >>>>
> >>>> When using a file system mounted on the dm-multipath device directly (Ie.: generating I/O via IOZone), it fails over gracefully when I pull out either of the fibre pairs, and the file system continues to operate. This device is called /dev/mapper/zimbra-mb1-t2-v4_fujitsu1-lun66.
> >>>>
> >>>> However, when I access an LVM volume created with sister devices as PVs, the LVM presented volume does not fail over. Rather the LV device goes inaccessible and the file system (ext3) re-mounts itself as read-only. If I try to access any of the underlying PVs, they still respond as available (Ie.: fdisk -l $PV).
> >>>>
> >>>> I am not seeing duplicate devices, and am using the following filter in /etc/lvm/lvm.conf:
> >>>>
> >>>> filter = [ "a|^/dev/md.*|", "a|^/dev/mapper/zimbra-mb.*-t.*-v.*_.*-lun.*|", "r|.*|" ]
> >>>>
> >>>>
> >>>> I have also added the following, but dm-multipath devices seem usable by LVM with or without this setting:
> >>>>
> >>>> types = [ "device-mapper", 1 ]
> >>>>
> >>>>
> >>>> I have tried removing the /etc/lvm/cache/.cache file, but that seems to have had no effect. I've also tried re-building the initrd after modifying the lvm.conf file, also with no effect.
> >>>>
> >>>> Additional info:
> >>>> root at zimbra-mb1:~# pvs
> >>>> PV VG Fmt Attr PSize PFree
> >>>> /dev/mapper/zimbra-mb1-t1-v1_fujitsu1-lun55 mb1_t1 lvm2 a- 195.31G 60.31G
> >>>> /dev/mapper/zimbra-mb1-t1-v2_fujitsu1-lun56 mb1_t1 lvm2 a- 195.31G 60.31G
> >>>> /dev/mapper/zimbra-mb1-t1-v3_fujitsu1-lun57 mb1_t1 lvm2 a- 195.31G 60.31G
> >>>> /dev/mapper/zimbra-mb1-t1-v4_fujitsu1-lun58 mb1_t1 lvm2 a- 195.31G 60.31G
> >>>> /dev/mapper/zimbra-mb1-t2-v1_fujitsu1-lun63 mb1_t2 lvm2 a- 504.00G 4.00G
> >>>> /dev/mapper/zimbra-mb1-t2-v2_fujitsu1-lun64 mb1_t2 lvm2 a- 488.28G 0
> >>>> /dev/mapper/zimbra-mb1-t2-v3_fujitsu1-lun65 mb1_t2 lvm2 a- 195.31G 195.31G
> >>>> /dev/mapper/zimbra-mb1-t2-v5_fujitsu1-lun67 mb1_t2 lvm2 a- 354.37G 0
> >>>> /dev/mapper/zimbra-mb1-t2-v6_fujitsu1-lun68 mb1_t2 lvm2 a- 234.56G 77.21G
> >>>> /dev/md1 zimbra-mb1 lvm2 a- 136.50G 83.50G
> >>>>
> >>>>
> >>>>
> >>>> kernel version: 2.6.24-24-server
> >>>> distoro: Ubuntu Hardy
> >>>> multipath-tools: 0.4.8-7ubuntu2
> >>>> lvm2: 2.02.26-1ubuntu9
> >>>>
> >>>> Thanks!
> >>>>
> >>>> -Brian
> >>>>
> >>>> _______________________________________________
> >>>> linux-lvm mailing list
> >>>> linux-lvm at redhat.com
> >>>> https://www.redhat.com/mailman/listinfo/linux-lvm
> >>>> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
> >>>
> >> _______________________________________________
> >> linux-lvm mailing list
> >> linux-lvm at redhat.com
> >> https://www.redhat.com/mailman/listinfo/linux-lvm
> >> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
> >
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm at redhat.com
> > https://www.redhat.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
>
> --
> Brian Elliott Finley
> Deputy Manager, Unix, Storage, and Operations
> Computing and Information Systems
> Argonne National Laboratory
> Office: 630.252.4742
> Mobile: 630.447.9108
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
More information about the linux-lvm
mailing list