[linux-lvm] Testing ThinLVM metadata exhaustion
Zdenek Kabelac
zkabelac at redhat.com
Fri Apr 22 14:04:28 UTC 2016
On 22.4.2016 15:12, Gionatan Danti wrote:
> Il 18-04-2016 16:25 Gionatan Danti ha scritto:
>> Hi all,
>> I'm testing the various metadata exhaustion cases and how to cope with
>> them. Specifically, I would like to fully understand what to expect
>> after a metadata space exhaustion and the relative check/repair. To
>> such extents, metadata autoresize is disabled.
>>
>> I'm using a fully updated CentOS 6.7 x84_64 virtual machine, with a
>> virtual disk (vdb) dedicated to the thin pool / volumes. This is what
>> pvs reports:
>>
>> PV VG Fmt Attr PSize PFree
>> /dev/vda2 vg_hvmaster lvm2 a-- 63.51g 0
>> /dev/vdb vgtest lvm2 a-- 32.00g 0
>>
>> I did the following operations:
>> vgcreate vgtest /dev/vdb
>> lvcreate --thin vgtest/ThinPool -L 1G # 4MB tmeta
>> lvchange -Zn vgtest
>> lvcreate --thin vgtest/ThinPool --name ThinVol -V 32G
>> lvresize vgtest/ThinPool -l +100%FREE # 31.99GB, 4MB tmeta, not resized
>>
>> With 64 KB chunks, the 4 MB tmeta volume is good for mapping ~8 GB, so
>> any other writes trigger a metadata space exhaustion. Then, I did:
>>
>> a) a first 8 GB write to almost fill the entire metadata space:
>> [root at hvmaster ~]# dd if=/dev/zero of=/dev/vgtest/ThinVol bs=1M count=8192
>> 8192+0 records in
>> 8192+0 records out
>> 8589934592 bytes (8.6 GB) copied, 101.059 s, 85.0 MB/s
>> [root at hvmaster ~]# lvs -a
>> LV VG Attr LSize Pool Origin Data%
>> Meta% Move Log Cpy%Sync Convert
>> lv_root vg_hvmaster -wi-ao---- 59.57g
>>
>> lv_swap vg_hvmaster -wi-ao---- 3.94g
>>
>> ThinPool vgtest twi-aot-M- 31.99g 21.51 92.09
>> [ThinPool_tdata] vgtest Twi-ao---- 31.99g
>>
>> [ThinPool_tmeta] vgtest ewi-ao---- 4.00m
>>
>> ThinVol vgtest Vwi-a-t--- 32.00g ThinPool 23.26
>>
>> [lvol0_pmspare] vgtest ewi------- 4.00m
>> [root at hvmaster ~]# thin_dump /dev/mapper/vgtest-ThinPool_tmeta
>> <superblock uuid="" time="0" transaction="1" data_block_size="128"
>> nr_data_blocks="524096">
>> <device dev_id="1" mapped_blocks="121968" transaction="0"
>> creation_time="0" snap_time="0">
>> <range_mapping origin_begin="0" data_begin="0" length="121968" time="0"/>
>> </device>
>> </superblock>
>>
>> b) a second non-synched 16 GB write to totally trash the tmeta volume:
>> # Second write
>> [root at hvmaster ~]# dd if=/dev/zero of=/dev/vgtest/ThinVol bs=1M count=8192
>> 8192+0 records in
>> 8192+0 records out
>> 8589934592 bytes (8.6 GB) copied, 101.059 s, 85.0 MB/s
>> [root at hvmaster ~]# lvs -a
>> LV VG Attr LSize Pool Origin Data%
>> Meta% Move Log Cpy%Sync Convert
>> lv_root vg_hvmaster -wi-ao---- 59.57g
>>
>> lv_swap vg_hvmaster -wi-ao---- 3.94g
>>
>> ThinPool vgtest twi-aot-M- 31.99g 21.51 92.09
>> [ThinPool_tdata] vgtest Twi-ao---- 31.99g
>>
>> [ThinPool_tmeta] vgtest ewi-ao---- 4.00m
>>
>> ThinVol vgtest Vwi-a-t--- 32.00g ThinPool 23.26
>>
>> [lvol0_pmspare] vgtest ewi------- 4.00m
>> [root at hvmaster ~]# thin_dump /dev/mapper/vgtest-ThinPool_tmeta
>> <superblock uuid="" time="0" transaction="1" data_block_size="128"
>> nr_data_blocks="524096">
>> <device dev_id="1" mapped_blocks="121968" transaction="0"
>> creation_time="0" snap_time="0">
>> <range_mapping origin_begin="0" data_begin="0" length="121968" time="0"/>
>> </device>
>> </superblock>
>>
>> c) a third, synched 16 GB write to see how the system behave with
>> fsync-rich filling:
>> [root at hvmaster ~]# dd if=/dev/zero of=/dev/vgtest/ThinVol bs=1M
>> count=16384 oflag=sync
>> dd: writing `/dev/vgtest/ThinVol': Input/output error
>> 7624+0 records in
>> 7623+0 records out
>> 7993294848 bytes (8.0 GB) copied, 215.808 s, 37.0 MB/s
>> [root at hvmaster ~]# lvs -a
>> Failed to parse thin params: Error.
>> Failed to parse thin params: Error.
>> Failed to parse thin params: Error.
>> Failed to parse thin params: Error.
>> LV VG Attr LSize Pool Origin Data%
>> Meta% Move Log Cpy%Sync Convert
>> lv_root vg_hvmaster -wi-ao---- 59.57g
>>
>> lv_swap vg_hvmaster -wi-ao---- 3.94g
>>
>> ThinPool vgtest twi-aot-M- 31.99g 21.51 92.09
>> [ThinPool_tdata] vgtest Twi-ao---- 31.99g
>>
>> [ThinPool_tmeta] vgtest ewi-ao---- 4.00m
>>
>> ThinVol vgtest Vwi-a-t--- 32.00g ThinPool
>>
>> [lvol0_pmspare] vgtest ewi------- 4.00m
>> [root at hvmaster ~]# thin_dump /dev/mapper/vgtest-ThinPool_tmeta
>> <superblock uuid="" time="0" transaction="1" data_block_size="128"
>> nr_data_blocks="524096">
>> metadata contains errors (run thin_check for details).
>> perhaps you wanted to run with --repair
>>
>> It is the last scenario (c) that puzzle me: rebooting the machine left
>> the thinpool inactive and inactivable (as expected), but executing
>> lvconvert --repair I can see that _all_ metadatas are gone (the pool
>> seems empty). Is that the expected behavior?
>>
>> Even more puzzling (for me) is that by skipping test a and b, and
>> going directly for c, I have a different behavior: the metadata volume
>> is (rightfully) completely filled, and the thin pool went in read-only
>> mode. Again, it that the expected behavior?
>>
>> Regards.
>
> Hi all,
> doing more tests I noticed that when "catastrophic" (non recoverable) metadata
> loss happens, dmesg logs the following lines:
>
> device-mapper: block manager: validator mismatch (old=sm_bitmap vs
> new=btree_node) for block 429
> device-mapper: space map common: unable to decrement a reference count below 0
> device-mapper: thin: 253:4: metadata operation 'dm_thin_insert_block' failed:
> error = -22
>
> During "normal" metadata exhaustion (when the pool can recover), the first two
> lines are not logged at all. Moreover, the third line reports error = -28,
> rather than error = -22 as above.
>
> I also tested the latest RHEL 7.2 and I can not reproduce the error above:
> metadata exhaustion always seems to be managed in a graceful (ie: recoverable)
> manner.
>
> I am missing something?
I assume you miss newer kernel.
There was originally this bug.
Regards
Zdenek
More information about the linux-lvm
mailing list