[linux-lvm] LVM RAID: task mdX_raid1:221 blocked for more than 120 seconds
Cesare Leonardi
celeonar at gmail.com
Mon Nov 26 12:43:29 UTC 2018
Il giorno lun 26 nov 2018 alle ore 12:40 Zdenek Kabelac
<zkabelac at redhat.com> ha scritto:
> So you should probably start first with running latest available kernel - 4.19.
>
> You also should collect 'dmesg' report
I've already the last Debian kernel (4.18.20). Kernel 4.19 is not packaged yet.
In #913119 there was a complete dmesg, that I've also attached here.
> Aren't you running out-of-memory ?
Not that I'm aware of. In the top bar I have an applet that shows cpu, ram
and swap usage and I've never noticed too high ram usage. I'll pay more
attention to that the next time I'll make a test.
> > I've not noticed any corruption due to these freeze but often they are very
> > long and very impacting. The only reliable workaround found was to reboot with:
> > scsi_mod.use_blk_mq=0 dm_mod.use_blk_mq=0
>
> I doubt this have anything in common with this.
That's surprising to me. I assure you that, until now, it's the only
thing that really resolved for me and that let me use Debian kernels
from 4.17 to 4.18.
I look forward to test 4.19 as soon as it will be available.
Cesare.
-------------- next part --------------
[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[ 0.000000] Linux version 4.18.0-2-amd64 (debian-kernel at lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.10-2 (2018-11-02)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=/dev/mapper/vg0-root ro quiet systemd.show_status=1 consoleblank=0 fsck.mode=force
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d5abdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5abe000-0x00000000d6064fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d6065000-0x00000000d6074fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d6075000-0x00000000d617dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d617e000-0x00000000d66f7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d66f8000-0x00000000d66f8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d66f9000-0x00000000d673bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d673c000-0x00000000d6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /DH61CR, BIOS BEH6110H.86A.0120.2013.1112.1412 11/12/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0D7800000 mask FFF800000 uncachable
[ 0.000000] 5 base 21F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd720-0x000fd72f] mapped at [(____ptrval____)]
[ 0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x1d4c4b000, 0x1d4c4bfff] PGTABLE
[ 0.000000] BRK [0x1d4c4c000, 0x1d4c4cfff] PGTABLE
[ 0.000000] BRK [0x1d4c4d000, 0x1d4c4dfff] PGTABLE
[ 0.000000] BRK [0x1d4c4e000, 0x1d4c4efff] PGTABLE
[ 0.000000] BRK [0x1d4c4f000, 0x1d4c4ffff] PGTABLE
[ 0.000000] BRK [0x1d4c50000, 0x1d4c50fff] PGTABLE
[ 0.000000] BRK [0x1d4c51000, 0x1d4c51fff] PGTABLE
[ 0.000000] BRK [0x1d4c52000, 0x1d4c52fff] PGTABLE
[ 0.000000] BRK [0x1d4c53000, 0x1d4c53fff] PGTABLE
[ 0.000000] BRK [0x1d4c54000, 0x1d4c54fff] PGTABLE
[ 0.000000] BRK [0x1d4c55000, 0x1d4c55fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34791000-0x363bffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000D6069070 000064 (v01 INTEL DH61CR 00000078 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D6072CF8 00010C (v05 INTEL DH61CR 00000078 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D6069168 009B8B (v02 INTEL DH61CR 00000078 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000D617C080 000040
[ 0.000000] ACPI: APIC 0x00000000D6072E08 000062 (v03 INTEL DH61CR 00000078 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D6072E70 000044 (v01 INTEL DH61CR 00000078 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D6072EB8 00003C (v01 INTEL DH61CR 00000078 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D6072EF8 000038 (v01 INTEL DH61CR 00000078 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D6072F30 00036D (v01 INTEL DH61CR 00000078 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D60732A0 00079A (v01 INTEL DH61CR 00000078 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D6073A40 000A92 (v01 INTEL DH61CR 00000078 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21f5f8000-0x21f5fcfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000d5abdfff]
[ 0.000000] node 0: [mem 0x00000000d66f8000-0x00000000d66f8fff]
[ 0.000000] node 0: [mem 0x00000000d673c000-0x00000000d6ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff]
[ 0.000000] Reserved but unavailable: 8418 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
[ 0.000000] On node 0 totalpages: 2053406
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 155 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13631 pages used for memmap
[ 0.000000] DMA32 zone: 872323 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0xd7a00000-0xdf9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd5abe000-0xd6064fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd6065000-0xd6074fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd6075000-0xd617dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd617e000-0xd66f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd66f9000-0xd673bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u1048576
[ 0.000000] pcpu-alloc: s142744 r8192 d29288 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2021164
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=/dev/mapper/vg0-root ro quiet systemd.show_status=1 consoleblank=0 fsck.mode=force
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7965836K/8213624K available (10252K kernel code, 1223K rwdata, 3260K rodata, 1548K init, 656K bss, 247788K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31267 entries in 123 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2294.608 MHz processor
[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21134f58f0d, max_idle_ns: 440795217993 ns
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.21 BogoMIPS (lpj=9178432)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] mce: CPU supports 7 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.024000] Freeing SMP alternatives memory: 24K
[ 0.024000] TSC deadline timer enabled
[ 0.024000] smpboot: CPU0: Intel(R) Pentium(R) CPU G630T @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.024000] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.024000] ... version: 3
[ 0.024000] ... bit width: 48
[ 0.024000] ... generic registers: 8
[ 0.024000] ... value mask: 0000ffffffffffff
[ 0.024000] ... max period: 00007fffffffffff
[ 0.024000] ... fixed-purpose events: 3
[ 0.024000] ... event mask: 00000007000000ff
[ 0.024000] Hierarchical SRCU implementation.
[ 0.024000] smp: Bringing up secondary CPUs ...
[ 0.024000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.024000] x86: Booting SMP configuration:
[ 0.024000] .... node #0, CPUs: #1
[ 0.028070] smp: Brought up 1 node, 2 CPUs
[ 0.028070] smpboot: Max logical packages: 1
[ 0.028070] smpboot: Total of 2 processors activated (9178.43 BogoMIPS)
[ 0.029565] devtmpfs: initialized
[ 0.029565] x86/mm: Memory block size: 128MB
[ 0.029565] PM: Registering ACPI NVS region [mem 0xd6075000-0xd617dfff] (1085440 bytes)
[ 0.029565] PM: Registering ACPI NVS region [mem 0xd66f9000-0xd673bfff] (274432 bytes)
[ 0.029565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.029565] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.029565] pinctrl core: initialized pinctrl subsystem
[ 0.029565] NET: Registered protocol family 16
[ 0.029565] audit: initializing netlink subsys (disabled)
[ 0.029565] audit: type=2000 audit(1541399120.028:1): state=initialized audit_enabled=0 res=1
[ 0.029565] cpuidle: using governor ladder
[ 0.029565] cpuidle: using governor menu
[ 0.029565] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.029565] ACPI: bus type PCI registered
[ 0.029565] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.029565] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.029565] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.029565] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.029565] PCI: Using configuration type 1 for base access
[ 0.029565] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.032363] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.032363] ACPI: Added _OSI(Module Device)
[ 0.032363] ACPI: Added _OSI(Processor Device)
[ 0.032363] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.032363] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.032363] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.038389] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.041090] ACPI: Dynamic OEM Table Load:
[ 0.041097] ACPI: SSDT 0xFFFF8A7116925000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.041499] ACPI: Dynamic OEM Table Load:
[ 0.041503] ACPI: SSDT 0xFFFF8A711543D400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.041754] ACPI: Dynamic OEM Table Load:
[ 0.041758] ACPI: SSDT 0xFFFF8A7115BA3E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.042398] ACPI: Interpreter enabled
[ 0.042417] ACPI: (supports S0 S3 S4 S5)
[ 0.042418] ACPI: Using IOAPIC for interrupt routing
[ 0.042444] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.042710] ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.050558] ACPI: Power Resource [FN00] (off)
[ 0.050640] ACPI: Power Resource [FN01] (off)
[ 0.050720] ACPI: Power Resource [FN02] (off)
[ 0.050798] ACPI: Power Resource [FN03] (off)
[ 0.050880] ACPI: Power Resource [FN04] (off)
[ 0.051430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.051435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.052060] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.052062] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.052552] PCI host bridge to bus 0000:00
[ 0.052555] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.052556] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.052558] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.052559] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.052561] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.052562] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.052564] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.052565] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.052567] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.052569] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.052578] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.052688] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.052727] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.052818] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.052829] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.052835] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.052839] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.052977] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.053004] pci 0000:00:16.0: reg 0x10: [mem 0xf7d2b000-0xf7d2b00f 64bit]
[ 0.053082] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.053179] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.053200] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.053209] pci 0000:00:19.0: reg 0x14: [mem 0xf7d29000-0xf7d29fff]
[ 0.053218] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.053284] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.053381] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.053404] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d28000-0xf7d283ff]
[ 0.053493] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.053588] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.053612] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d20000-0xf7d23fff 64bit]
[ 0.053691] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.053786] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.053877] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.053986] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.054009] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d27000-0xf7d273ff]
[ 0.054098] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.054194] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.054392] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.054412] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.054421] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.054429] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.054437] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.054446] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.054454] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d26000-0xf7d267ff]
[ 0.054498] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.054586] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.054606] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d25000-0xf7d250ff 64bit]
[ 0.054628] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.054771] pci 0000:01:00.0: [1b4b:9215] type 00 class 0x010601
[ 0.054785] pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057]
[ 0.054791] pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043]
[ 0.054798] pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037]
[ 0.054805] pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023]
[ 0.054811] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.054818] pci 0000:01:00.0: reg 0x24: [mem 0xf7c10000-0xf7c107ff]
[ 0.054825] pci 0000:01:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
[ 0.054865] pci 0000:01:00.0: PME# supported from D3hot
[ 0.054925] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.054927] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.054930] pci 0000:00:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.055016] pci 0000:02:00.0: [1283:8892] type 01 class 0x060401
[ 0.055229] pci 0000:02:00.0: supports D1 D2
[ 0.055231] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055305] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.055376] pci_bus 0000:03: extended config space not accessible
[ 0.055493] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.056246] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.056300] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.056353] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.056405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.056457] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.056511] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.056564] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.056616] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.056937] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.056937] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.056937] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.056937] vgaarb: loaded
[ 0.056937] pps_core: LinuxPPS API ver. 1 registered
[ 0.056937] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.056937] PTP clock support registered
[ 0.056937] EDAC MC: Ver: 3.0.0
[ 0.056937] PCI: Using ACPI for IRQ routing
[ 0.057640] PCI: pci_cache_line_size set to 64 bytes
[ 0.057690] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.057692] e820: reserve RAM buffer [mem 0xd5abe000-0xd7ffffff]
[ 0.057693] e820: reserve RAM buffer [mem 0xd66f9000-0xd7ffffff]
[ 0.057694] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[ 0.057696] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.057800] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.057800] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.061027] clocksource: Switched to clocksource tsc-early
[ 0.070223] VFS: Disk quotas dquot_6.6.0
[ 0.070241] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.070350] AppArmor: AppArmor Filesystem Enabled
[ 0.070370] pnp: PnP ACPI init
[ 0.070491] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.070497] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.070584] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.070586] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.070588] system 00:01: [io 0xffff] has been reserved
[ 0.070590] system 00:01: [io 0xffff] has been reserved
[ 0.070592] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.070594] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.070595] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.070597] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.070601] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.070629] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.070677] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.070681] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.070857] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.070859] system 00:04: [io 0x0778-0x077f] has been reserved
[ 0.070863] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.071181] pnp 00:05: [dma 0 disabled]
[ 0.071236] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.071503] pnp 00:06: [dma 3]
[ 0.071617] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.071718] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.071723] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.071928] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.071930] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.071932] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.071934] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.071936] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.071938] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.071940] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.071941] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.071943] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.071945] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.071947] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.071952] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.072117] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.072119] system 00:09: [mem 0x40000000-0x401fffff] has been reserved
[ 0.072123] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.072143] pnp: PnP ACPI: found 10 devices
[ 0.078015] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.078055] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.078058] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.078061] pci 0000:00:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.078066] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.078094] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.078106] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.078108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.078110] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.078111] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.078113] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.078114] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.078116] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.078117] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.078119] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff window]
[ 0.078121] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.078122] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.078221] NET: Registered protocol family 2
[ 0.078365] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.078398] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.078530] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.078674] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.078715] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.078743] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.078800] NET: Registered protocol family 1
[ 0.078831] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.078847] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.100116] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6b0 took 20754 usecs
[ 0.124106] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 23413 usecs
[ 0.124127] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.124176] Unpacking initramfs...
[ 0.640331] Freeing initrd memory: 28860K
[ 0.640414] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.640417] software IO TLB [mem 0xd1abe000-0xd5abe000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.641059] Initialise system trusted keyrings
[ 0.641113] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.642411] zbud: loaded
[ 0.642677] pstore: using deflate compression
[ 1.050315] Key type asymmetric registered
[ 1.050317] Asymmetric key parser 'x509' registered
[ 1.050360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.050385] io scheduler noop registered
[ 1.050386] io scheduler deadline registered
[ 1.050429] io scheduler cfq registered (default)
[ 1.050430] io scheduler mq-deadline registered
[ 1.050918] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 1.050941] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[ 1.050968] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.050982] intel_idle: MWAIT substates: 0x1120
[ 1.050983] intel_idle: v0.4.1 model 0x2A
[ 1.051055] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.051246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.071969] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.072500] Linux agpgart interface v0.103
[ 1.072543] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[ 1.072544] AMD IOMMUv2 functionality not available on this system
[ 1.072721] i8042: PNP: No PS/2 controller found.
[ 1.072770] mousedev: PS/2 mouse device common for all mice
[ 1.072800] rtc_cmos 00:02: RTC can wake from S4
[ 1.072945] rtc_cmos 00:02: registered as rtc0
[ 1.072961] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.072972] intel_pstate: Intel P-state driver initializing
[ 1.073021] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.073608] NET: Registered protocol family 10
[ 1.079253] Segment Routing with IPv6
[ 1.079282] mip6: Mobile IPv6
[ 1.079285] NET: Registered protocol family 17
[ 1.079290] mpls_gso: MPLS GSO support
[ 1.079490] microcode: sig=0x206a7, pf=0x2, revision=0x2e
[ 1.079548] microcode: Microcode Update Driver: v2.2.
[ 1.079562] sched_clock: Marking stable (1079540637, 0)->(1061002707, 18537930)
[ 1.079773] registered taskstats version 1
[ 1.079774] Loading compiled-in X.509 certificates
[ 1.136225] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 1.136244] zswap: loaded using pool lzo/zbud
[ 1.136333] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.136727] rtc_cmos 00:02: setting system clock to 2018-11-05 06:25:21 UTC (1541399121)
[ 1.138602] Freeing unused kernel image memory: 1548K
[ 1.156050] Write protecting the kernel read-only data: 16384k
[ 1.156722] Freeing unused kernel image memory: 2028K
[ 1.157003] Freeing unused kernel image memory: 836K
[ 1.169504] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.169505] x86/mm: Checking user space page tables
[ 1.179343] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.265678] SCSI subsystem initialized
[ 1.270786] libata version 3.00 loaded.
[ 1.272312] ahci 0000:00:1f.2: version 3.0
[ 1.280184] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.280185] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.280395] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.283048] ACPI: bus type USB registered
[ 1.283072] usbcore: registered new interface driver usbfs
[ 1.283081] usbcore: registered new interface driver hub
[ 1.283101] usbcore: registered new device driver usb
[ 1.284386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.284562] ehci-pci: EHCI PCI platform driver
[ 1.284686] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.284693] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.284706] ehci-pci 0000:00:1a.0: debug port 2
[ 1.288597] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.290222] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.291878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.291881] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.296502] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.296504] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.296744] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.296745] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.299119] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d28000
[ 1.312016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.312105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.312107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.312108] usb usb1: Product: EHCI Host Controller
[ 1.312110] usb usb1: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[ 1.312111] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.312240] hub 1-0:1.0: USB hub found
[ 1.312249] hub 1-0:1.0: 2 ports detected
[ 1.312572] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.312578] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.312591] ehci-pci 0000:00:1d.0: debug port 2
[ 1.316493] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.316525] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d27000
[ 1.324768] scsi host0: ahci
[ 1.324945] scsi host1: ahci
[ 1.325056] scsi host2: ahci
[ 1.325162] scsi host3: ahci
[ 1.325265] scsi host4: ahci
[ 1.325364] scsi host5: ahci
[ 1.325430] ata1: SATA max UDMA/133 abar m2048 at 0xf7d26000 port 0xf7d26100 irq 26
[ 1.325432] ata2: SATA max UDMA/133 abar m2048 at 0xf7d26000 port 0xf7d26180 irq 26
[ 1.325433] ata3: DUMMY
[ 1.325434] ata4: DUMMY
[ 1.325437] ata5: SATA max UDMA/133 abar m2048 at 0xf7d26000 port 0xf7d26300 irq 26
[ 1.325440] ata6: SATA max UDMA/133 abar m2048 at 0xf7d26000 port 0xf7d26380 irq 26
[ 1.332049] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.332429] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.332432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.332434] usb usb2: Product: EHCI Host Controller
[ 1.332436] usb usb2: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[ 1.332438] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.332704] hub 2-0:1.0: USB hub found
[ 1.332717] hub 2-0:1.0: 2 ports detected
[ 1.336047] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.336052] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.337056] scsi host6: ahci
[ 1.337285] scsi host7: ahci
[ 1.337457] scsi host8: ahci
[ 1.337597] scsi host9: ahci
[ 1.337678] ata7: SATA max UDMA/133 abar m2048 at 0xf7c10000 port 0xf7c10100 irq 28
[ 1.337681] ata8: SATA max UDMA/133 abar m2048 at 0xf7c10000 port 0xf7c10180 irq 28
[ 1.337683] ata9: SATA max UDMA/133 abar m2048 at 0xf7c10000 port 0xf7c10200 irq 28
[ 1.337685] ata10: SATA max UDMA/133 abar m2048 at 0xf7c10000 port 0xf7c10280 irq 28
[ 1.429010] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.557872] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:0b:c9:47
[ 1.557874] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.557955] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.560373] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.638486] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.638513] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.638670] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.638692] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.639491] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.639496] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.639499] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.640375] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.640379] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.640383] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.640495] ata1.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
[ 1.640498] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.640568] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.640573] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.640576] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.640638] ata5.00: supports DRM functions and may not be fully accessible
[ 1.641432] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.641436] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.641439] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.641529] ata5.00: disabling queued TRIM support
[ 1.641532] ata5.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[ 1.641535] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.641603] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSC0, LK00, max UDMA/133
[ 1.642093] ata1.00: configured for UDMA/133
[ 1.642289] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[ 1.643488] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.643492] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.643495] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.644474] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.644479] ata6.00: configured for UDMA/133
[ 1.644480] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.644489] sd 0:0:0:0: [sda] Write Protect is off
[ 1.644498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.644511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.644922] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.644926] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.644930] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.645159] ata5.00: supports DRM functions and may not be fully accessible
[ 1.645824] ata5.00: disabling queued TRIM support
[ 1.646746] ata5.00: configured for UDMA/133
[ 1.646880] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.647121] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.647129] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.647131] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.647143] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648018] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.648099] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSC0 LK00 PQ: 0 ANSI: 5
[ 1.649285] sdb: sdb1 sdb2 sdb3
[ 1.649879] sd 4:0:0:0: [sdb] supports TCG Opal
[ 1.649881] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.650496] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.650514] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.650539] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.660026] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[ 1.660032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[ 1.660043] clocksource: Switched to clocksource tsc
[ 1.668023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.693737] sda: sda1
[ 1.694054] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.707018] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.707020] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.707343] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.804485] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.804488] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.804876] hub 1-1:1.0: USB hub found
[ 1.804936] hub 1-1:1.0: 4 ports detected
[ 1.812048] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.813625] ata10.00: supports DRM functions and may not be fully accessible
[ 1.814217] ata10.00: disabling queued TRIM support
[ 1.814220] ata10.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[ 1.814222] ata10.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.815212] ata10.00: supports DRM functions and may not be fully accessible
[ 1.815735] ata10.00: disabling queued TRIM support
[ 1.816496] ata10.00: configured for UDMA/133
[ 1.816663] scsi 9:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.816906] sd 9:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.816915] sd 9:0:0:0: [sdc] Write Protect is off
[ 1.816917] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.816930] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.818365] sdc: sdc1 sdc2 sdc3
[ 1.818859] sd 9:0:0:0: [sdc] supports TCG Opal
[ 1.818860] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 1.824314] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.824316] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.825043] hub 2-1:1.0: USB hub found
[ 1.825300] hub 2-1:1.0: 6 ports detected
[ 1.825565] random: fast init done
[ 2.020008] raid6: sse2x1 gen() 7041 MB/s
[ 2.088004] raid6: sse2x1 xor() 4886 MB/s
[ 2.156007] raid6: sse2x2 gen() 8195 MB/s
[ 2.224005] raid6: sse2x2 xor() 5525 MB/s
[ 2.292006] raid6: sse2x4 gen() 9751 MB/s
[ 2.360007] raid6: sse2x4 xor() 6477 MB/s
[ 2.360008] raid6: using algorithm sse2x4 gen() 9751 MB/s
[ 2.360009] raid6: .... xor() 6477 MB/s, rmw enabled
[ 2.360010] raid6: using ssse3x2 recovery algorithm
[ 2.360338] xor: measuring software checksum speed
[ 2.400005] prefetch64-sse: 12202.000 MB/sec
[ 2.440004] generic_sse: 11256.000 MB/sec
[ 2.440005] xor: using function: prefetch64-sse (12202.000 MB/sec)
[ 2.440019] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.440357] async_tx: api initialized (async)
[ 2.456339] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.483220] device-mapper: uevent: version 1.0.3
[ 2.483291] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel at redhat.com
[ 2.490853] device-mapper: raid: Loading target version 1.13.2
[ 2.492377] random: lvm: uninitialized urandom read (2 bytes read)
[ 2.501049] md/raid1:mdX: active with 2 out of 2 mirrors
[ 2.555452] usb 1-1.3: New USB device found, idVendor=045e, idProduct=0750, bcdDevice= 1.10
[ 2.555455] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.555458] usb 1-1.3: Product: Wired Keyboard 600
[ 2.555459] usb 1-1.3: Manufacturer: Microsoft
[ 2.574703] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.578870] Btrfs loaded, crc32c=crc32c-intel
[ 2.583650] usbcore: registered new interface driver usbhid
[ 2.583652] usbhid: USB HID core driver
[ 2.585518] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0750.0001/input/input0
[ 2.636036] usb 1-1.4: new low-speed USB device number 4 using ehci-pci
[ 2.644222] microsoft 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.0-1.3/input0
[ 2.644652] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:045E:0750.0002/input/input1
[ 2.708092] microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.0-1.3/input1
[ 2.724490] BTRFS: device label backup devid 3 transid 34615 /dev/sda1
[ 2.749472] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[ 2.749475] usb 1-1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.749478] usb 1-1.4: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.749479] usb 1-1.4: Manufacturer: Microsoft
[ 2.752457] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0040.0003/input/input2
[ 2.752528] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.4/input0
[ 2.753946] cryptd: max_cpu_qlen set to 1000
[ 4.653739] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 4.792120] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.812167] systemd[1]: Detected architecture x86-64.
[ 4.816480] systemd[1]: Set hostname to <barone>.
[ 4.990089] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.990219] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.990580] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.990631] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.990969] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.991025] systemd[1]: Listening on Journal Audit Socket.
[ 4.991311] systemd[1]: Reached target User and Group Name Lookups.
[ 4.992161] systemd[1]: Created slice User and Session Slice.
[ 4.992520] systemd[1]: Listening on udev Kernel Socket.
[ 4.993768] systemd[1]: Listening on Syslog Socket.
[ 5.066671] EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
[ 5.076193] lp: driver loaded but no devices found
[ 5.092086] ppdev: user-space parallel port driver
[ 5.093200] parport_pc 00:06: reported by Plug and Play ACPI
[ 5.093274] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[ 5.188098] lp0: using parport0 (interrupt-driven).
[ 5.193830] nct6775: Found NCT6775F or compatible chip at 0x2e:0xa00
[ 5.368888] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.368907] ACPI: Power Button [PWRB]
[ 5.368959] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.368968] ACPI: Power Button [PWRF]
[ 5.429999] systemd-journald[324]: Received request to flush runtime journal from PID 1
[ 5.517388] iTCO_vendor_support: vendor-support=0
[ 5.518010] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.519089] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.519131] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.520285] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 5.520316] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.520450] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 5.520488] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 5.568674] random: crng init done
[ 5.568677] random: 5 urandom warning(s) missed due to ratelimiting
[ 5.574594] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.670757] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.670758] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.670759] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.670760] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.705335] [drm] Replacing VGA console driver
[ 5.705764] Console: switching to colour dummy device 80x25
[ 5.724420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.724422] [drm] Driver supports precise vblank timestamp query.
[ 5.726377] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.772974] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 5.773515] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.773696] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 5.774116] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.802153] intel_rapl: Found RAPL domain package
[ 5.802155] intel_rapl: Found RAPL domain core
[ 5.802156] intel_rapl: Found RAPL domain uncore
[ 5.822369] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 5.822372] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[ 5.822374] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.822376] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.822377] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 5.822378] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.822381] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.822382] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.822384] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.874386] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.876865] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.877208] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.877549] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.877683] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.878112] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.918549] fbcon: inteldrmfb (fb0) is primary device
[ 5.975839] Console: switching to colour frame buffer device 240x67
[ 5.997124] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.192440] BTRFS info (device sda1): enabling auto defrag
[ 6.192444] BTRFS info (device sda1): use zlib compression, level 3
[ 6.192446] BTRFS info (device sda1): disk space caching is enabled
[ 6.192447] BTRFS info (device sda1): has skinny extents
[ 6.234775] md/raid1:mdX: active with 2 out of 2 mirrors
[ 6.292465] md/raid1:mdX: active with 2 out of 2 mirrors
[ 6.356224] Adding 4194300k swap on /dev/mapper/vg0-swap0. Priority:-2 extents:1 across:4194300k SSFS
[ 7.182631] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
[ 8.038071] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.308212] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 11.094070] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 11.094111] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 11.268320] NET: Registered protocol family 15
[ 11.348843] Initializing XFRM netlink socket
[ 11.699741] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 28.118617] fuse init (API version 7.27)
[ 4839.612385] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 8043.454959] perf: interrupt took too long (3135 > 3131), lowering kernel.perf_event_max_sample_rate to 63750
[19930.540646] perf: interrupt took too long (3928 > 3918), lowering kernel.perf_event_max_sample_rate to 50750
[65588.677915] perf: interrupt took too long (4923 > 4910), lowering kernel.perf_event_max_sample_rate to 40500
[77211.909405] INFO: task mdX_raid1:225 blocked for more than 120 seconds.
[77211.909411] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77211.909413] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77211.909416] mdX_raid1 D 0 225 2 0x80000000
[77211.909420] Call Trace:
[77211.909431] ? __schedule+0x2b7/0x880
[77211.909435] schedule+0x28/0x80
[77211.909446] md_super_wait+0x6e/0xa0 [md_mod]
[77211.909451] ? finish_wait+0x80/0x80
[77211.909458] bitmap_wait_writes+0x93/0xa0 [md_mod]
[77211.909465] ? bitmap_get_counter+0x40/0xc0 [md_mod]
[77211.909471] bitmap_daemon_work+0x23b/0x360 [md_mod]
[77211.909478] md_check_recovery+0x26/0x570 [md_mod]
[77211.909483] raid1d+0x5c/0x890 [raid1]
[77211.909487] ? lock_timer_base+0x67/0x80
[77211.909490] ? try_to_del_timer_sync+0x4d/0x80
[77211.909492] ? del_timer_sync+0x35/0x40
[77211.909496] ? schedule_timeout+0x181/0x380
[77211.909502] ? md_rdev_init+0xb0/0xb0 [md_mod]
[77211.909507] ? md_thread+0x122/0x160 [md_mod]
[77211.909510] ? handle_read_error+0x4f0/0x4f0 [raid1]
[77211.909515] md_thread+0x122/0x160 [md_mod]
[77211.909519] ? finish_wait+0x80/0x80
[77211.909522] kthread+0x113/0x130
[77211.909524] ? kthread_create_worker_on_cpu+0x70/0x70
[77211.909527] ret_from_fork+0x35/0x40
[77211.909531] INFO: task jbd2/dm-4-8:291 blocked for more than 120 seconds.
[77211.909534] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77211.909536] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77211.909538] jbd2/dm-4-8 D 0 291 2 0x80000000
[77211.909541] Call Trace:
[77211.909544] ? __schedule+0x2b7/0x880
[77211.909547] schedule+0x28/0x80
[77211.909551] io_schedule+0x12/0x40
[77211.909556] wait_on_page_bit_common+0xfd/0x180
[77211.909560] ? page_cache_tree_insert+0xe0/0xe0
[77211.909564] __filemap_fdatawait_range+0xd5/0x130
[77211.909568] ? submit_bio+0x6c/0x140
[77211.909570] ? submit_bio+0x6c/0x140
[77211.909574] ? guard_bio_eod+0x2c/0xf0
[77211.909577] filemap_fdatawait_keep_errors+0x1a/0x40
[77211.909586] jbd2_journal_commit_transaction+0x702/0x1810 [jbd2]
[77211.909590] ? __switch_to_asm+0x40/0x70
[77211.909592] ? __switch_to_asm+0x40/0x70
[77211.909599] ? kjournald2+0xbd/0x270 [jbd2]
[77211.909604] kjournald2+0xbd/0x270 [jbd2]
[77211.909608] ? finish_wait+0x80/0x80
[77211.909613] ? commit_timeout+0x10/0x10 [jbd2]
[77211.909615] kthread+0x113/0x130
[77211.909617] ? kthread_create_worker_on_cpu+0x70/0x70
[77211.909619] ret_from_fork+0x35/0x40
[77211.909638] INFO: task lightdm-gtk-gre:4843 blocked for more than 120 seconds.
[77211.909640] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77211.909642] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77211.909644] lightdm-gtk-gre D 0 4843 4829 0x00000000
[77211.909647] Call Trace:
[77211.909650] ? __schedule+0x2b7/0x880
[77211.909653] ? bit_wait+0x50/0x50
[77211.909655] schedule+0x28/0x80
[77211.909658] io_schedule+0x12/0x40
[77211.909661] bit_wait_io+0xd/0x50
[77211.909664] __wait_on_bit+0x44/0x80
[77211.909667] out_of_line_wait_on_bit+0x91/0xb0
[77211.909671] ? init_wait_var_entry+0x40/0x40
[77211.909676] do_get_write_access+0x261/0x460 [jbd2]
[77211.909682] jbd2_journal_get_write_access+0x48/0x60 [jbd2]
[77211.909705] __ext4_journal_get_write_access+0x41/0x70 [ext4]
[77211.909722] ext4_reserve_inode_write+0x8d/0xb0 [ext4]
[77211.909738] ? ext4_dirty_inode+0x43/0x60 [ext4]
[77211.909752] ext4_mark_inode_dirty+0x51/0x1d0 [ext4]
[77211.909757] ? jbd2__journal_start+0xd7/0x1e0 [jbd2]
[77211.909771] ext4_dirty_inode+0x43/0x60 [ext4]
[77211.909775] __mark_inode_dirty+0x112/0x3a0
[77211.909779] generic_update_time+0x9f/0xd0
[77211.909782] file_update_time+0xe0/0x130
[77211.909786] __generic_file_write_iter+0x99/0x1c0
[77211.909800] ext4_file_write_iter+0x201/0x3e0 [ext4]
[77211.909805] new_sync_write+0x104/0x160
[77211.909808] vfs_write+0xad/0x1a0
[77211.909811] ksys_write+0x52/0xc0
[77211.909815] do_syscall_64+0x55/0x110
[77211.909819] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[77211.909822] RIP: 0033:0x7fd9977352d7
[77211.909823] Code: Bad RIP value.
[77211.909831] RSP: 002b:00007ffc2fcafb20 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[77211.909833] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd9977352d7
[77211.909835] RDX: 00000000000000ad RSI: 00007ffc2fcafd20 RDI: 0000000000000002
[77211.909836] RBP: 00007ffc2fcafd20 R08: 0000000000000000 R09: 0000000000000000
[77211.909838] R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000000ad
[77211.909839] R13: 00000000000000ad R14: 00007fd9977ff760 R15: 00000000000000ad
[77211.909850] INFO: task kworker/u4:12:6928 blocked for more than 120 seconds.
[77211.909852] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77211.909854] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77211.909856] kworker/u4:12 D 0 6928 2 0x80000000
[77211.909861] Workqueue: writeback wb_workfn (flush-253:4)
[77211.909863] Call Trace:
[77211.909867] ? __schedule+0x2b7/0x880
[77211.909870] schedule+0x28/0x80
[77211.909877] md_super_wait+0x6e/0xa0 [md_mod]
[77211.909880] ? finish_wait+0x80/0x80
[77211.909887] bitmap_wait_writes+0x93/0xa0 [md_mod]
[77211.909893] bitmap_unplug+0xb8/0x110 [md_mod]
[77211.909897] flush_bio_list+0x1c/0xd0 [raid1]
[77211.909901] raid1_unplug+0xc1/0xd0 [raid1]
[77211.909904] blk_flush_plug_list+0xdf/0x270
[77211.909908] blk_finish_plug+0x27/0x40
[77211.909910] wb_writeback+0x17f/0x300
[77211.909914] ? wb_workfn+0x18d/0x410
[77211.909916] wb_workfn+0x18d/0x410
[77211.909921] process_one_work+0x195/0x370
[77211.909924] worker_thread+0x30/0x390
[77211.909927] ? process_one_work+0x370/0x370
[77211.909929] kthread+0x113/0x130
[77211.909931] ? kthread_create_worker_on_cpu+0x70/0x70
[77211.909933] ret_from_fork+0x35/0x40
[77332.740199] INFO: task mdX_raid1:225 blocked for more than 120 seconds.
[77332.740205] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77332.740207] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77332.740210] mdX_raid1 D 0 225 2 0x80000000
[77332.740214] Call Trace:
[77332.740227] ? __schedule+0x2b7/0x880
[77332.740230] schedule+0x28/0x80
[77332.740242] md_super_wait+0x6e/0xa0 [md_mod]
[77332.740249] ? finish_wait+0x80/0x80
[77332.740256] bitmap_wait_writes+0x93/0xa0 [md_mod]
[77332.740262] ? bitmap_get_counter+0x40/0xc0 [md_mod]
[77332.740269] bitmap_daemon_work+0x23b/0x360 [md_mod]
[77332.740275] md_check_recovery+0x26/0x570 [md_mod]
[77332.740280] raid1d+0x5c/0x890 [raid1]
[77332.740284] ? lock_timer_base+0x67/0x80
[77332.740286] ? try_to_del_timer_sync+0x4d/0x80
[77332.740289] ? del_timer_sync+0x35/0x40
[77332.740292] ? schedule_timeout+0x181/0x380
[77332.740298] ? md_rdev_init+0xb0/0xb0 [md_mod]
[77332.740304] ? md_thread+0x122/0x160 [md_mod]
[77332.740307] ? handle_read_error+0x4f0/0x4f0 [raid1]
[77332.740312] md_thread+0x122/0x160 [md_mod]
[77332.740315] ? finish_wait+0x80/0x80
[77332.740319] kthread+0x113/0x130
[77332.740321] ? kthread_create_worker_on_cpu+0x70/0x70
[77332.740324] ret_from_fork+0x35/0x40
[77332.740328] INFO: task jbd2/dm-4-8:291 blocked for more than 120 seconds.
[77332.740331] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77332.740332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77332.740334] jbd2/dm-4-8 D 0 291 2 0x80000000
[77332.740337] Call Trace:
[77332.740341] ? __schedule+0x2b7/0x880
[77332.740344] schedule+0x28/0x80
[77332.740348] io_schedule+0x12/0x40
[77332.740352] wait_on_page_bit_common+0xfd/0x180
[77332.740356] ? page_cache_tree_insert+0xe0/0xe0
[77332.740360] __filemap_fdatawait_range+0xd5/0x130
[77332.740364] ? submit_bio+0x6c/0x140
[77332.740366] ? submit_bio+0x6c/0x140
[77332.740370] ? guard_bio_eod+0x2c/0xf0
[77332.740374] filemap_fdatawait_keep_errors+0x1a/0x40
[77332.740382] jbd2_journal_commit_transaction+0x702/0x1810 [jbd2]
[77332.740386] ? __switch_to_asm+0x40/0x70
[77332.740389] ? __switch_to_asm+0x40/0x70
[77332.740396] ? kjournald2+0xbd/0x270 [jbd2]
[77332.740401] kjournald2+0xbd/0x270 [jbd2]
[77332.740404] ? finish_wait+0x80/0x80
[77332.740410] ? commit_timeout+0x10/0x10 [jbd2]
[77332.740412] kthread+0x113/0x130
[77332.740414] ? kthread_create_worker_on_cpu+0x70/0x70
[77332.740416] ret_from_fork+0x35/0x40
[77332.740434] INFO: task lightdm-gtk-gre:4843 blocked for more than 120 seconds.
[77332.740437] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77332.740439] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77332.740441] lightdm-gtk-gre D 0 4843 4829 0x00000000
[77332.740443] Call Trace:
[77332.740447] ? __schedule+0x2b7/0x880
[77332.740450] ? bit_wait+0x50/0x50
[77332.740452] schedule+0x28/0x80
[77332.740455] io_schedule+0x12/0x40
[77332.740458] bit_wait_io+0xd/0x50
[77332.740461] __wait_on_bit+0x44/0x80
[77332.740464] out_of_line_wait_on_bit+0x91/0xb0
[77332.740468] ? init_wait_var_entry+0x40/0x40
[77332.740473] do_get_write_access+0x261/0x460 [jbd2]
[77332.740479] jbd2_journal_get_write_access+0x48/0x60 [jbd2]
[77332.740501] __ext4_journal_get_write_access+0x41/0x70 [ext4]
[77332.740518] ext4_reserve_inode_write+0x8d/0xb0 [ext4]
[77332.740534] ? ext4_dirty_inode+0x43/0x60 [ext4]
[77332.740548] ext4_mark_inode_dirty+0x51/0x1d0 [ext4]
[77332.740553] ? jbd2__journal_start+0xd7/0x1e0 [jbd2]
[77332.740567] ext4_dirty_inode+0x43/0x60 [ext4]
[77332.740571] __mark_inode_dirty+0x112/0x3a0
[77332.740574] generic_update_time+0x9f/0xd0
[77332.740577] file_update_time+0xe0/0x130
[77332.740581] __generic_file_write_iter+0x99/0x1c0
[77332.740595] ext4_file_write_iter+0x201/0x3e0 [ext4]
[77332.740600] new_sync_write+0x104/0x160
[77332.740603] vfs_write+0xad/0x1a0
[77332.740606] ksys_write+0x52/0xc0
[77332.740610] do_syscall_64+0x55/0x110
[77332.740614] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[77332.740617] RIP: 0033:0x7fd9977352d7
[77332.740618] Code: Bad RIP value.
[77332.740625] RSP: 002b:00007ffc2fcafb20 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[77332.740628] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd9977352d7
[77332.740630] RDX: 00000000000000ad RSI: 00007ffc2fcafd20 RDI: 0000000000000002
[77332.740631] RBP: 00007ffc2fcafd20 R08: 0000000000000000 R09: 0000000000000000
[77332.740633] R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000000ad
[77332.740634] R13: 00000000000000ad R14: 00007fd9977ff760 R15: 00000000000000ad
[77332.740644] INFO: task kworker/u4:12:6928 blocked for more than 120 seconds.
[77332.740647] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[77332.740649] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[77332.740651] kworker/u4:12 D 0 6928 2 0x80000000
[77332.740656] Workqueue: writeback wb_workfn (flush-253:4)
[77332.740658] Call Trace:
[77332.740662] ? __schedule+0x2b7/0x880
[77332.740665] schedule+0x28/0x80
[77332.740671] md_super_wait+0x6e/0xa0 [md_mod]
[77332.740675] ? finish_wait+0x80/0x80
[77332.740681] bitmap_wait_writes+0x93/0xa0 [md_mod]
[77332.740688] bitmap_unplug+0xb8/0x110 [md_mod]
[77332.740691] flush_bio_list+0x1c/0xd0 [raid1]
[77332.740695] raid1_unplug+0xc1/0xd0 [raid1]
[77332.740698] blk_flush_plug_list+0xdf/0x270
[77332.740702] blk_finish_plug+0x27/0x40
[77332.740705] wb_writeback+0x17f/0x300
[77332.740708] ? wb_workfn+0x18d/0x410
[77332.740711] wb_workfn+0x18d/0x410
[77332.740715] process_one_work+0x195/0x370
[77332.740718] worker_thread+0x30/0x390
[77332.740721] ? process_one_work+0x370/0x370
[77332.740723] kthread+0x113/0x130
[77332.740725] ? kthread_create_worker_on_cpu+0x70/0x70
[77332.740727] ret_from_fork+0x35/0x40
[77407.548980] systemd[1]: systemd-journald.service: Main process exited, code=killed, status=6/ABRT
[77407.549059] systemd[1]: systemd-journald.service: Failed with result 'watchdog'.
[77407.550194] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[77407.550265] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[77407.550381] systemd[1]: Stopped Flush Journal to Persistent Storage.
[77407.550410] systemd[1]: Stopping Flush Journal to Persistent Storage...
[77407.550418] systemd[1]: Stopped Journal Service.
[77407.553581] systemd[1]: Starting Journal Service...
[77407.603326] systemd-journald[6999]: File /var/log/journal/07f7f9cd590a4efb8284abc2d2ec08d0/system.journal corrupted or uncleanly shut down, renaming and replacing.
[77407.619959] systemd[1]: Started Journal Service.
[77683.014728] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv(authenc(hmac(sha1-generic),cbc(aes-asm))))
[85549.232239] INFO: task systemd:1 blocked for more than 120 seconds.
[85549.232245] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[85549.232247] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[85549.232249] systemd D 0 1 0 0x00000000
[85549.232253] Call Trace:
[85549.232264] ? __schedule+0x2b7/0x880
[85549.232267] schedule+0x28/0x80
[85549.232277] wait_transaction_locked+0x86/0xc0 [jbd2]
[85549.232284] ? finish_wait+0x80/0x80
[85549.232288] add_transaction_credits+0x1b9/0x290 [jbd2]
[85549.232292] ? current_time+0x4d/0x90
[85549.232297] start_this_handle+0x102/0x400 [jbd2]
[85549.232301] ? _cond_resched+0x15/0x40
[85549.232305] jbd2__journal_start+0xd7/0x1e0 [jbd2]
[85549.232329] ext4_dirty_inode+0x2d/0x60 [ext4]
[85549.232334] __mark_inode_dirty+0x112/0x3a0
[85549.232350] ext4_setattr+0x1db/0x9e0 [ext4]
[85549.232353] ? current_time+0x4d/0x90
[85549.232356] notify_change+0x303/0x420
[85549.232360] utimes_common+0xdd/0x1a0
[85549.232364] do_utimes+0x128/0x160
[85549.232368] __x64_sys_utimensat+0x88/0xd0
[85549.232373] ? do_sys_open+0x140/0x250
[85549.232377] ? do_syscall_64+0x55/0x110
[85549.232380] ? __x32_compat_sys_utime+0xb0/0xb0
[85549.232383] do_syscall_64+0x55/0x110
[85549.232387] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[85549.232390] RIP: 0033:0x7f055c66e18f
[85549.232391] Code: Bad RIP value.
[85549.232398] RSP: 002b:00007ffdf154de88 EFLAGS: 00000206 ORIG_RAX: 0000000000000118
[85549.232401] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f055c66e18f
[85549.232402] RDX: 00007ffdf154dec0 RSI: 00007ffdf154dea0 RDI: 00000000ffffff9c
[85549.232404] RBP: 0000000000000019 R08: 0000000000000002 R09: 00007ffdf154dbe6
[85549.232405] R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffdf154dea0
[85549.232407] R13: 00007ffdf154dec0 R14: 000579f8d6a3e1de R15: 00000000ffffffff
[85549.232418] INFO: task mdX_raid1:225 blocked for more than 120 seconds.
[85549.232421] Not tainted 4.18.0-2-amd64 #1 Debian 4.18.10-2
[85549.232423] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[85549.232425] mdX_raid1 D 0 225 2 0x80000000
[85549.232427] Call Trace:
[85549.232431] ? __schedule+0x2b7/0x880
[85549.232434] schedule+0x28/0x80
[85549.232444] md_super_wait+0x6e/0xa0 [md_mod]
[85549.232448] ? finish_wait+0x80/0x80
[85549.232454] bitmap_wait_writes+0x93/0xa0 [md_mod]
[85549.232457] ? __switch_to_asm+0x40/0x70
[85549.232464] bitmap_unplug+0xb8/0x110 [md_mod]
[85549.232468] flush_bio_list+0x1c/0xd0 [raid1]
[85549.232472] flush_pending_writes+0x95/0xe0 [raid1]
[85549.232475] ? mutex_lock+0xe/0x30
[85549.232481] ? bitmap_daemon_work+0x9a/0x360 [md_mod]
[85549.232483] ? __switch_to_asm+0x34/0x70
[85549.232487] ? raid1d+0xa3/0x890 [raid1]
[85549.232489] raid1d+0xa3/0x890 [raid1]
[85549.232494] ? try_to_del_timer_sync+0x4d/0x80
[85549.232500] ? md_rdev_init+0xb0/0xb0 [md_mod]
[85549.232505] ? md_thread+0x122/0x160 [md_mod]
[85549.232508] ? handle_read_error+0x4f0/0x4f0 [raid1]
[85549.232513] md_thread+0x122/0x160 [md_mod]
[85549.232517] ? finish_wait+0x80/0x80
[85549.232520] kthread+0x113/0x130
[85549.232522] ? kthread_create_worker_on_cpu+0x70/0x70
[85549.232525] ret_from_fork+0x35/0x40
More information about the linux-lvm
mailing list