[Ovirt-devel] Re: Fw: Install problems on fresh F10
Perry Myers
pmyers at redhat.com
Thu Dec 25 18:48:39 UTC 2008
Daniel Galeus wrote:
>
> ----- Original Message -----
> *From:* daniel at sml.se <mailto:daniel at sml.se>
> *To:* ovirt-devel at redhat.com <mailto:ovirt-devel at redhat.com>
> *Sent:* Thursday, December 25, 2008 11:00 AM
> *Subject:* Install problems on fresh F10
>
> I'm trying to install 0.96 on a fresh install of Fedora 10.
>
> I follow the install instructions on the web page, and in addition I
> disable Network Manager with commands provided by pmyers.
>
> When I run create-ovirt-network I get the following error.
>
> Currently defined libvirt networks:
> -----------------------------------
> libvir: Remote error : unable to connect to
> '/var/run/libvirt/libvirt-sock': No such file or directory
> error: failed to connect to the hypervisor
>
> Please find below the console output during my install.
Thanks for the info. That libvirt error would seem to indicate that
libvirt daemon is not running.
Comments and some debugging inline below...
> Ciao,
> bs66
>
> ***
>
>
> [root at localhost sysuser]# sudo service networkmanager stop
> networkmanager: unrecognized service
> [root at localhost sysuser]# sudo service NetworkManager stop
> Stopping NetworkManager daemon: [ OK ]
> [root at localhost sysuser]# sudo yum remove NetworkManager\*
> Loaded plugins: refresh-packagekit
> Setting up Remove Process
> Resolving Dependencies
> --> Running transaction check
> ---> Package NetworkManager-gnome.x86_64 1:0.7.0-0.12.svn4326.fc10 set
> to be erased
> ---> Package NetworkManager.x86_64 1:0.7.0-0.12.svn4326.fc10 set to be
> erased
> ---> Package NetworkManager-glib.x86_64 1:0.7.0-0.12.svn4326.fc10 set to
> be erased
> --> Processing Dependency: libnm_glib.so.0()(64bit) for package: evolution
> --> Processing Dependency: libnm_glib.so.0()(64bit) for package:
> krb5-auth-dialog
> --> Processing Dependency: libnm_glib.so.0()(64bit) for package: PackageKit
> --> Running transaction check
> ---> Package evolution.x86_64 0:2.24.2-2.fc10 set to be erased
> --> Processing Dependency: evolution = 2.24.2-2.fc10 for package:
> evolution-help
> --> Processing Dependency: evolution = 2.24.2-2.fc10 for package:
> evolution-perl
> ---> Package krb5-auth-dialog.x86_64 0:0.7-7.fc9 set to be erased
> ---> Package PackageKit.x86_64 0:0.3.12-1.fc10 set to be erased
> --> Processing Dependency: PackageKit = 0.3.12-1.fc10 for package:
> PackageKit-yum
> --> Processing Dependency: PackageKit >= 0.3.11 for package:
> gnome-packagekit
> --> Processing Dependency: PackageKit = 0.3.12-1.fc10 for package:
> PackageKit-glib
> --> Processing Dependency: PackageKit for package: PackageKit-yum-plugin
> --> Processing Dependency: PackageKit for package: PackageKit-udev-helper
> --> Running transaction check
> ---> Package evolution-help.x86_64 0:2.24.2-2.fc10 set to be erased
> ---> Package PackageKit-glib.x86_64 0:0.3.12-1.fc10 set to be erased
> --> Processing Dependency: PackageKit-glib = 0.3.12-1.fc10 for package:
> PackageKit-gstreamer-plugin
> ---> Package gnome-packagekit.x86_64 0:0.3.12-1.fc10 set to be erased
> ---> Package PackageKit-udev-helper.x86_64 0:0.3.12-1.fc10 set to be erased
> ---> Package PackageKit-yum.x86_64 0:0.3.12-1.fc10 set to be erased
> ---> Package evolution-perl.x86_64 0:2.24.2-2.fc10 set to be erased
> ---> Package PackageKit-yum-plugin.x86_64 0:0.3.12-1.fc10 set to be erased
> --> Running transaction check
> ---> Package PackageKit-gstreamer-plugin.x86_64 0:0.3.12-1.fc10 set to
> be erased
> --> Finished Dependency Resolution
>
> Dependencies Resolved
>
> ================================================================================
> Package Arch Version Repository
>
> Size
> ================================================================================
> Removing:
> NetworkManager x86_64 1:0.7.0-0.12.svn4326.fc10
> installed 2.9 M
> NetworkManager-glib x86_64 1:0.7.0-0.12.svn4326.fc10
> installed 370 k
> NetworkManager-gnome x86_64 1:0.7.0-0.12.svn4326.fc10
> installed 889 k
> Removing for dependencies:
> PackageKit x86_64 0.3.12-1.fc10
> installed 1.1 M
> PackageKit-glib x86_64 0.3.12-1.fc10
> installed 321 k
> PackageKit-gstreamer-plugin x86_64 0.3.12-1.fc10
> installed 139 k
> PackageKit-udev-helper x86_64 0.3.12-1.fc10
> installed 126 k
> PackageKit-yum x86_64 0.3.12-1.fc10
> installed 334 k
> PackageKit-yum-plugin x86_64 0.3.12-1.fc10
> installed 128 k
> evolution x86_64 2.24.2-2.fc10
> installed 38 M
> evolution-help x86_64 2.24.2-2.fc10
> installed 53 M
> evolution-perl x86_64 2.24.2-2.fc10
> installed 7.6 k
> gnome-packagekit x86_64 0.3.12-1.fc10
> installed 6.0 M
> krb5-auth-dialog x86_64 0.7-7.fc9
> installed 56 k
>
> Transaction Summary
> ================================================================================
> Install 0 Package(s)
> Update 0 Package(s)
> Remove 14 Package(s)
>
> Is this ok [y/N]: y
> Downloading Packages:
> ============================== Entering rpm code
> ===============================
> Running rpm_check_debug
> Running Transaction Test
> Finished Transaction Test
> Transaction Test Succeeded
> Running Transaction
> Erasing :
> krb5-auth-dialog 1/14
> Erasing :
> NetworkManager-glib 2/14
> Erasing :
> PackageKit-yum-plugin 3/14
> Erasing :
> PackageKit-glib 4/14
> Erasing :
> NetworkManager-gnome 5/14
> Erasing :
> gnome-packagekit 6/14
> Erasing :
> PackageKit 7/14
> Erasing :
> NetworkManager 8/14
> Erasing :
> evolution-perl 9/14
> Erasing :
> PackageKit-udev-helper 10/14
> Erasing :
> evolution-help 11/14
> Erasing :
> evolution 12/14
> Erasing :
> PackageKit-yum 13/14
> Erasing :
> PackageKit-gstreamer-plugin 14/14
> Unable to send message to PackageKit
> =============================== Leaving rpm code
> ===============================
>
> Removed:
> NetworkManager.x86_64
> 1:0.7.0-0.12.svn4326.fc10
> NetworkManager-glib.x86_64
> 1:0.7.0-0.12.svn4326.fc10
> NetworkManager-gnome.x86_64
> 1:0.7.0-0.12.svn4326.fc10
>
> Dependency Removed:
> PackageKit.x86_64
> 0:0.3.12-1.fc10
> PackageKit-glib.x86_64
> 0:0.3.12-1.fc10
> PackageKit-gstreamer-plugin.x86_64
> 0:0.3.12-1.fc10
> PackageKit-udev-helper.x86_64
> 0:0.3.12-1.fc10
> PackageKit-yum.x86_64
> 0:0.3.12-1.fc10
> PackageKit-yum-plugin.x86_64
> 0:0.3.12-1.fc10
> evolution.x86_64
> 0:2.24.2-2.fc10
> evolution-help.x86_64
> 0:2.24.2-2.fc10
> evolution-perl.x86_64
> 0:2.24.2-2.fc10
> gnome-packagekit.x86_64
> 0:0.3.12-1.fc10
> krb5-auth-dialog.x86_64
> 0:0.7-7.fc9
>
> Complete!
> [root at localhost sysuser]# sudo chkconfig network on
> [root at localhost sysuser]# sudo service network stop
> Shutting down loopback interface: [ OK ]
> [root at localhost sysuser]# sudo service network start
> Bringing up loopback interface: [ OK ]
Looks like you don't have /etc/sysconfig/network-scripts/ifcfg-eth0 file
defined... That's why your network doesn't work after removing
NetworkManager. If you use DHCP for eth0, minimum ifcfg-eth0 can look
like this:
> DEVICE=eth0
> BOOTPROTO=dhcp
> ONBOOT=yes
After creating /etc/sysconfig/network-scripts/ifcfg-eth0 with above
contents then try
sudo service network restart
and you should get your network back.
> [root at localhost sysuser]# sudo create-ovirt-network
> Currently active bridges:
> -------------------------
> bridge name bridge id STP enabled interfaces
> pan0 8000.000000000000 no
> virbr0 8000.000000000000 yes
>
> Currently defined libvirt networks:
> -----------------------------------
> libvir: Remote error : unable to connect to
> '/var/run/libvirt/libvirt-sock': No such file or directory
> error: failed to connect to the hypervisor
Yeah, this indicates that libvirtd is not running. Try
sudo service libvirtd restart
sudo virsh net-list --all
and then retry
sudo create-ovirt-network
and see if you get the same error message.
Let me know what the output of all of the above commands are.
> Removing ovirtbr0
> Done Removing ovirtbr0
> Network ovirtbr0 defined from /tmp/tmp.uBtmBwfX65
>
> Network ovirtbr0 started
>
> Network ovirtbr0 marked as autostarted
>
> net.ipv4.ip_forward = 1
> augtool> set /files/etc/sysctl.conf/net.ipv4.ip_forward 1
> augtool> save
> Saved 1 file(s)
> augtool>
> Shutting down dnsmasq: [FAILED]
> Starting dnsmasq: [ OK ]
> Currently active bridges:
> -------------------------
> bridge name bridge id STP enabled interfaces
> ovirtbr0 8000.000000000000 no
> pan0 8000.000000000000 no
> virbr0 8000.000000000000 yes
>
> Currently defined libvirt networks:
> -----------------------------------
> Name State Autostart
> -----------------------------------------
> default active yes
> ovirtbr0 active yes
>
>
> [root at localhost sysuser]#
>
>
>
--
|=- Red Hat, Engineering, Emerging Technologies, Boston -=|
|=- Email: pmyers at redhat.com -=|
|=- Office: +1 412 474 3552 Mobile: +1 703 362 9622 -=|
|=- GnuPG: E65E4F3D 88F9 F1C9 C2F3 1303 01FE 817C C5D2 8B91 E65E 4F3D -=|
More information about the ovirt-devel
mailing list