[Ovirt-devel] Physical Network Devices table empty

[ovirt at proinbox.com]

dmesg|grep "firmware"

bnx2: 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
bnx2: Can't load firmware file "bnx2/bnx2-mips-06-4.6.16.fw"
bnx2: 0000:07:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
bnx2: Can't load firmware file "bnx2/bnx2-mips-06-4.6.16.fw"

- thanks.

On Sat, 12 Dec 2009 02:03 +0100, "Alan Pevec" <apevec at gmail.com> wrote:
> On Sat, Dec 12, 2009 at 12:41 AM,  <ovirt at proinbox.com> wrote:
> > My aim is to install a standalone node on the following hardware & run the
> > management server in one of it's VMs.
> >
> > Dell Poweredge 2950
> > PERC 6/i RAID0 6x: 25G / 1T / 4.4T
> > Dual Xeon 5470 quad-core 3.3GHz / 20G RAM
> > Dual onboard Broadcom NetXtreme II BCM5708 NICs
> 
> Looks like driver for that NIC failed to load, please go to Shell
> option and check in dmesg for errors
> probably due to missing firmware. There was a patch just after 1.0.2
> release which fixes firmware missing in the image:
> http://git.fedorahosted.org/git/ovirt/?p=ovirt/node-image.git;a=commitdiff;h=4134abf597efbc7bb8c13772eca69d8c94eb3df5
> 1.0.3 should be out next week, but in the meantime you can try
> building ovirt-node-image from "next" branch.
> 
> > I downloaded the oVirt Node 1.0.2-1.fc11.x86_64 iso from the website & boot
> > in standalone mode per instructions on the wiki.
> >
> > When entering the "4) Networking Setup" menu, there aren't any devices
> > present:
> >
> > Physical Networking Devices (*=PXE boot interface)
> >  Name           Driver              MAC
> > 1) DNS                                           3) Abort
> > 2) NTP                                           4) Save And Return To Menu
> > Please select an interface or configuration option: _