[Ovirt-devel] [PATCH node] Replaced calls to echo with log so that we get datestamps in the log file
Perry Myers
pmyers at redhat.com
Tue Jan 20 05:50:00 UTC 2009
Fix mount_config to only try to mount /config if the host has persistent
storage for Config defined.
Signed-off-by: Perry Myers <pmyers at redhat.com>
---
scripts/ovirt | 14 +++++++-------
scripts/ovirt-early | 26 +++++++++++++-------------
scripts/ovirt-functions | 11 +++++++----
scripts/ovirt-post | 2 +-
4 files changed, 28 insertions(+), 25 deletions(-)
diff --git a/scripts/ovirt b/scripts/ovirt
index f789d24..8694db9 100755
--- a/scripts/ovirt
+++ b/scripts/ovirt
@@ -21,11 +21,11 @@ start() {
wget -q \
http://$SRV_HOST:$SRV_PORT/ipa/config/krb5.ini -O $krb5_conf.tmp
if [ $? -ne 0 ]; then
- echo "Failed to get $krb5_conf"; return 1
+ log "Failed to get $krb5_conf"; return 1
fi
mv $krb5_conf.tmp $krb5_conf
else
- echo "skipping Kerberos configuration"
+ log "skipping Kerberos configuration"
fi
find_srv identify tcp
@@ -37,10 +37,10 @@ start() {
fi
ovirt-awake start $SRV_HOST $SRV_PORT $krb5_tab
if [ $? -ne 0 ]; then
- echo "ovirt-awake failed"; return 1
+ log "ovirt-awake failed"; return 1
fi
else
- echo "skipping ovirt-awake, oVirt identify service not available"
+ log "skipping ovirt-awake, oVirt identify service not available"
fi
find_srv collectd tcp
@@ -52,11 +52,11 @@ start() {
-e /<Plugin rrdtool>/,/<\/Plugin>/d $collectd_conf.in \
> $collectd_conf
if [ $? -ne 0 ]; then
- echo "Failed to write $collectd_conf"; return 1
+ log "Failed to write $collectd_conf"; return 1
fi
fi
else
- echo "skipping collectd configuration, collectd service not available"
+ log "skipping collectd configuration, collectd service not available"
fi
find_srv qpidd tcp
@@ -66,7 +66,7 @@ start() {
echo "LIBVIRT_QPID_ARGS=\"--broker $SRV_HOST --port $SRV_PORT\"" >> $libvirt_qpid_conf
fi
else
- echo "skipping libvirt-qpid configuration, could not find $libvirt_qpid_conf"
+ log "skipping libvirt-qpid configuration, could not find $libvirt_qpid_conf"
fi
}
diff --git a/scripts/ovirt-early b/scripts/ovirt-early
index a7cf4dc..b99c26b 100755
--- a/scripts/ovirt-early
+++ b/scripts/ovirt-early
@@ -21,36 +21,36 @@ get_mac_addresses() {
configure_from_network() {
DEVICE=$1
if [ -n "$DEVICE" ]; then
- echo "Configuring network Using interface $DEVICE"
+ log "Configuring network Using interface $DEVICE"
# setup temporary interface to retrieve configuration
echo "network --device $DEVICE --bootproto dhcp" | nash
if [ $? -eq 0 ]; then
# from network-scripts/ifup-post
IPADDR=$(LC_ALL=C ip -o -4 addr ls dev ${DEVICE} | awk '{ print $4 ; exit }')
- echo "Interface brought up with $IPADDR"
+ log "Interface brought up with $IPADDR"
eval $(ipcalc --silent --hostname ${IPADDR} ; echo "status=$?")
if [ "$status" = "0" ]; then
hostname $HOSTNAME
- echo "Hostname resolved to $HOSTNAME"
+ log "Hostname resolved to $HOSTNAME"
# retrieve remote config
find_srv ovirt tcp
if [ -n "$SRV_HOST" -a -n "$SRV_PORT" ]; then
- echo "oVirt Server found at: $SRV_HOST:$SRV_PORT"
+ log "oVirt Server found at: $SRV_HOST:$SRV_PORT"
cfgdb=$(mktemp)
get_mac_addresses
- echo "MACs to use: $macs"
+ log "MACs to use: $macs"
wget -O $cfgdb \
"http://$SRV_HOST:$SRV_PORT/ovirt/managed_node/config?host=$(hostname)&macs=$macs"
if [ $? -eq 0 ]; then
- echo "Remote configuration bundle retrieved to $cfgdb"
+ log "Remote configuration bundle retrieved to $cfgdb"
ovirt-process-config $cfgdb $BONDING_MODCONF_FILE $AUGTOOL_CONFIG
if [ $? -eq 0 ]; then
- echo "Remote configuration retrieved and applied"
+ log "Remote configuration retrieved and applied"
else
- echo "Failure to retrieve or apply remote configuration"
+ log "Failure to retrieve or apply remote configuration"
fi
else
- echo "Failed to retrieve configuration bundle"
+ log "Failed to retrieve configuration bundle"
fi
rm $cfgdb
fi
@@ -62,14 +62,14 @@ configure_from_network() {
ETHDEVS=$(cd /sys/class/net && ls -d eth*)
for eth in $ETHDEVS; do
BRIDGE=ovirtbr`echo $eth | cut -b4-`
- echo "Applying default configuration to $eth and $BRIDGE"
+ log "Applying default configuration to $eth and $BRIDGE"
printf '%s\n' "DEVICE=$eth" ONBOOT=yes "BRIDGE=$BRIDGE" \
> /etc/sysconfig/network-scripts/ifcfg-$eth
printf '%s\n' "DEVICE=$BRIDGE" BOOTPROTO=dhcp \
ONBOOT=yes TYPE=Bridge PEERNTP=yes DELAY=0 \
> /etc/sysconfig/network-scripts/ifcfg-$BRIDGE
done
- echo "Default config applied"
+ log "Default config applied"
}
# $(get_live_disk)
@@ -312,7 +312,7 @@ start() {
params="bootif init vol_boot_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size local_boot standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns syslog_server syslog_port collectd_server collectd_port bootparams hostname"
mount_config
if [ -e $OVIRT_DEFAULTS ]; then
- echo "update ovirt defaults"
+ log "update ovirt defaults"
tmpaug=$(mktemp)
for p in $params; do
PARAM=$(uc $p)
@@ -322,7 +322,7 @@ start() {
done
augtool $tmpaug
else
- echo "initial startup"
+ log "initial startup"
# dump all ovirt bootparams
mkdir -p $(dirname $OVIRT_DEFAULTS)
echo > $OVIRT_DEFAULTS
diff --git a/scripts/ovirt-functions b/scripts/ovirt-functions
index 7728640..8f1694b 100644
--- a/scripts/ovirt-functions
+++ b/scripts/ovirt-functions
@@ -219,12 +219,13 @@ mount_liveos() {
# mount config partition
# /config for persistance
mount_config() {
- if ! grep -q " /config " /proc/mounts; then
+ # Only try to mount /config if the persistent storage exists
+ if [ -e /dev/HostVG/Config ] ; then
mkdir -p /config
- mount /dev/HostVG/Config /config
- fi
+ if ! grep -q "/dev/mapper/HostVG-Config " /proc/mounts; then
+ mount /dev/HostVG/Config /config || return 1
+ fi
- if grep -q " /config " /proc/mounts; then
# optional config embedded in the livecd image
if [ -e /live/config ]; then
cp -rv --update /live/config/* /config
@@ -241,6 +242,8 @@ mount_config() {
mount -n --bind $f "$target"
fi
done
+
+ return 0
else
# /config is not available
return 1
diff --git a/scripts/ovirt-post b/scripts/ovirt-post
index 3861973..068c709 100755
--- a/scripts/ovirt-post
+++ b/scripts/ovirt-post
@@ -25,7 +25,7 @@ start() {
if [ -n "$SRV_HOST" -a -n "$SRV_PORT" ]; then
ovirt-identify-node -s $SRV_HOST -p $SRV_PORT
else
- echo "skipping ovirt-identify-node, oVirt registration service not available"
+ log "skipping ovirt-identify-node, oVirt registration service not available"
fi
}
--
1.6.0.6
More information about the ovirt-devel
mailing list