[Ovirt-devel] [PATCH server] ovirt server installer autobuild integration

[Mohammed Morsi]

 update server autobuild to set up a new isolated vm environment and
 go through the server installer process and rails tests
---
 autobuild.sh                 |   65 ++++++++++++++++++++++++++++++++++++++++++
 ovirt-installer-test-answers |   21 +++++++++++++
 ovirt-server-test.ks         |   37 ++++++++++++++++++++++++
 3 files changed, 123 insertions(+), 0 deletions(-)
 create mode 100644 ovirt-installer-test-answers
 create mode 100644 ovirt-server-test.ks

diff --git a/autobuild.sh b/autobuild.sh
index 2cc11d6..66a5167 100755
--- a/autobuild.sh
+++ b/autobuild.sh
@@ -25,10 +25,13 @@ set -v
 
 test -f Makefile && make -k distclean || :
 
+############# build the server rpm
+
 # put rails in development mode
 cp conf/ovirt-rails.sysconf conf/ovirt-rails.sysconf.orig
 echo "RAILS_ENV=development" >> conf/ovirt-rails.sysconf
 
+# build server & installer rpms
 ./autogen.sh --prefix=$AUTOBUILD_INSTALL_ROOT
 make dist
 
@@ -43,4 +46,66 @@ if [ -f /usr/bin/rpmbuild ]; then
   rpmbuild --nodeps --define "extra_release $EXTRA_RELEASE" -ta --clean *.tar.gz
 fi
 
+# restore to checkout
 mv conf/ovirt-rails.sysconf.orig conf/ovirt-rails.sysconf
+
+############## setup new vm to test installer
+
+# setup parameters to ssh to vm
+SSHKEY=~/.ssh/id_autobuild
+remote_target="root at 192.168.122.190" # should be an address on default libvirt network
+ssh_cmd="ssh -i $SSHKEY -o StrictHostKeyChecking=no \
+             -o UserKnownHostsFile=/dev/null $remote_target"
+scp_cmd="scp -i $SSHKEY -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null"
+
+# generate new ssh key if not found
+if [ ! -r $SSHKEY ]; then
+  mkdir -p $(dirname "$SSHKEY")
+  ssh-keygen -q -t rsa -N "" -f $SSHKEY
+fi
+
+# copy the key and installer answers to the kickstart
+cp ovirt-server-test.ks ovirt-server-test.ks.orig
+cat >> ovirt-server-test.ks << KS
+%post
+mkdir -p /root/.ssh
+chmod 700 /root/.ssh
+cat > /root/.ssh/authorized_keys << \EOF
+$(ssh-keygen -y -f $SSHKEY)
+EOF
+chmod 600 /root/.ssh/authorized_keys
+
+cat > /root/ovirt-installer-answers << \EOF
+$(cat ovirt-installer-test-answers)
+EOF
+
+%end
+KS
+
+# remove old server vm
+test ! -f ovirt-server-test.tar || rm -f ovirt-server-test.tar
+test ! -d test-vm || rm -rf test-vm
+sudo virsh destroy ovirt-server-test || true
+sudo virsh undefine ovirt-server-test || true
+
+# create new vm for server, configuring via kickstart, boot it
+sudo appliance-creator --config ovirt-server-test.ks --name ovirt-server-test \
+                       -f qcow2 -p tar -d -v
+
+# restore original kickstart
+mv ovirt-server-test.ks.orig ovirt-server-test.ks
+
+# define the libvirt vm, boot it
+mkdir -p test-vm
+tar -xSvf ovirt-server-test.tar -C test-vm
+sudo virt-image test-vm/ovirt-server-test/ovirt-server-test.xml
+sudo virsh define /etc/libvirt/qemu/ovirt-server-test.xml
+
+################### test server vm
+
+# run installer on server vm, answering preconfigured questions
+$ssh_cmd "ovirt-installer < /root/ovirt-installer-answers"
+$ssh_cmd "ace -d install ovirt"
+
+# run tests on newly installed server
+$ssh_cmd "cd /usr/share/ovirt-server && rake db:migrate && rake test"
diff --git a/ovirt-installer-test-answers b/ovirt-installer-test-answers
new file mode 100644
index 0000000..6827360
--- /dev/null
+++ b/ovirt-installer-test-answers
@@ -0,0 +1,21 @@
+y
+eth0
+eth0
+management.ovirtautobuild.com
+n
+n
+192.168.134
+3
+50
+ovirtautobuild.com
+192.168.134.1
+y
+n
+cobbler
+cobbler
+cobbler
+v23zj59an
+v23zj59an
+ovirtautobuild.com
+ovirt
+ovirt
diff --git a/ovirt-server-test.ks b/ovirt-server-test.ks
new file mode 100644
index 0000000..c30ed5a
--- /dev/null
+++ b/ovirt-server-test.ks
@@ -0,0 +1,37 @@
+install
+
+lang en_US.UTF-8
+keyboard us
+# should have address on default libvirt network
+network --device=eth0 --bootproto=static --ip=192.168.122.190 --netmask=255.255.255.0 --onboot=on --nameserver=192.168.122.1 --gateway=192.168.122.1
+# Root password is 'ovirt'
+rootpw --iscrypted Xa8QeYfWrtscM
+firewall --disabled
+authconfig --enableshadow --enablemd5
+selinux --disabled
+# NOTE: ntp/ntpdate need to stay in this list to ensure that time on the
+# appliance is correct prior to the ovirt-server-installer being run.  Otherwise you
+# get Kerberos errors
+services --disabled=libvirtd,postgresql --enabled=network,iptables,ntpdate,acpid,sshd
+timezone --utc UTC
+text
+
+bootloader --location=mbr --driveorder=sda --append="console=tty0"
+zerombr
+clearpart --all --drives=sda
+part /boot  --ondisk=sda --fstype=ext3 --size=100
+part /      --ondisk=sda --fstype=ext3 --size=5000
+part swap   --ondisk=sda --fstype=swap --size=512
+reboot
+
+repo --name=f10 --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-10&arch=x86_64
+repo --name=ovirt-org --baseurl=http://ovirt.org/repos/ovirt/10/x86_64
+repo --name=f10-updates --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=updates-released-f10&arch=x86_64
+repo --name=ovirt-local --baseurl=file:///var/lib/builder/ovirt/package-root/rpm
+
+%packages --excludedocs --nobase
+%include /usr/share/appliance-os/includes/base-pkgs.ks
+openssh-server
+ovirt-server
+ovirt-server-installer
+ovirt-node-image-pxe
-- 
1.6.0.6