From v-defender at ukr.net Thu Dec 16 13:31:35 2010 From: v-defender at ukr.net (Ivan A.Shaposhnikov) Date: Thu, 16 Dec 2010 15:31:35 +0200 Subject: [Ovirt-devel] ovirt install from scratch Message-ID: <4D0A14B7.3010202@ukr.net> Hello to all. I am have a question about installation process of oVirt project. I am using instruction from this resource https://fedorahosted.org/ovirt/wiki/Build. I use fresh install of fedora 13. I am build node rmps and ovirt-node-image.iso But have some problems with install ovirt management node. I run ace -d install ovirt and attach output. I see that Main qestion about that i see some error //cobbler::bundled/Package[ovirt-node-image-pxe]/ensure: change from absent to present failed: Could not find package ovirt-node-image-pxe where to find this package?? and second trouble with kerberos i thin because /bin/echo ovirt|/usr/kerberos/bin/kinit admin] has 1 failures /usr/kerberos/bin/kinit admin Password for admin at TESTING: kinit: Preauthentication failed while getting initial credentials tail -f /var/log/krb5kdc.log Dec 16 13:36:25 ovirtmanage.localdomain krb5kdc[15018](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226: NEEDED_PREAUTH: admin at TESTING for krbtgt/TESTING at TESTING, Additional pre-authentication required Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): preauth (timestamp) verify failure: No matching key in entry Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226: PREAUTH_FAILED: admin at TESTING for krbtgt/TESTING at TESTING, Preauthentication failed Can you help me with this trouble or may be you have some new docs. Thank you. Ivan. -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: ace_output.txt URL: From agoddard at mbl.edu Thu Dec 16 14:22:52 2010 From: agoddard at mbl.edu (Anthony Goddard) Date: Thu, 16 Dec 2010 09:22:52 -0500 Subject: [Ovirt-devel] roadmap & development Message-ID: <5E35C27E-1B1A-4464-AE31-A9DE5882FCBF@mbl.edu> Hi there, I'm very interested in oVirt as a management interface for a VM setup we're building, however it seems as though there isn't much info on the product roadmap or active development. I'm wondering if anyone could point me to more information on the roadmap or commit activity on the project? Regards, Anthony -------------- next part -------------- An HTML attachment was scrubbed... URL: From menno at terlaak.name Thu Dec 16 14:48:01 2010 From: menno at terlaak.name (Menno ter Laak) Date: Thu, 16 Dec 2010 15:48:01 +0100 Subject: [Ovirt-devel] roadmap & development In-Reply-To: <5E35C27E-1B1A-4464-AE31-A9DE5882FCBF@mbl.edu> Message-ID: <5bf411638832c01a3411d2a171542c2bdff48954@terlaak.name> LS,? Is ovirt in Red Hat EL6 or just Fedora 13? I would like to make a test setup also.I have 2x Dell R210 servers specced out and 1 HP oldie for management. Kind Regards, Menno Originele tekst Van: Anthony Goddard Aan: Cc: Verstuurd:Thu, 16 Dec 2010 09:22:52 -0500 Onderwerp:[Ovirt-devel] roadmap & development Hi there,I'm very interested in oVirt as a management interface for a VM setup we're building, however it seems as though there isn't much info on the product roadmap or active development. I'm wondering if anyone could point me to more information on the roadmap or commit activity on the project? Regards,Anthony ------------------------- Email sent using Atmail - Email, Groupware and Calendaring done right. -------------- next part -------------- An HTML attachment was scrubbed... URL: From nicolas.ochem at gmail.com Fri Dec 17 13:48:16 2010 From: nicolas.ochem at gmail.com (Nicolas Ochem) Date: Fri, 17 Dec 2010 14:48:16 +0100 Subject: [Ovirt-devel] ovirt install from scratch In-Reply-To: <4D0A14B7.3010202@ukr.net> References: <4D0A14B7.3010202@ukr.net> Message-ID: Hello, When you build ovirt-node-image.iso you should also have built ovirt-node-image-pxe rpm. Install this rpm manually and the waring about the missing rpm will disappear. About freeipa/kerberos error, this is not related to ovirt. Maybe ovirt-server will work anyway ? You should look into kerberos and/or freeipa for answers. On Thu, Dec 16, 2010 at 2:31 PM, Ivan A.Shaposhnikov wrote: > Hello to all. > I am have a question about installation process of oVirt project. > I am using instruction from this resource > https://fedorahosted.org/ovirt/wiki/Build. > > I use fresh install of fedora 13. > > I am build node rmps > and > > ovirt-node-image.iso > > But have some problems with install ovirt management node. > > I run > ace -d install ovirt > > and attach output. > > I see that > > Main qestion about > that i see some error > > //cobbler::bundled/Package[ovirt-node-image-pxe]/ensure: change from absent > to present failed: Could not find package ovirt-node-image-pxe > > where to find this package?? > > and second trouble with kerberos i thin because > > /bin/echo ovirt|/usr/kerberos/bin/kinit admin] has 1 failures > > > /usr/kerberos/bin/kinit admin > Password for admin at TESTING: > kinit: Preauthentication failed while getting initial credentials > > tail -f /var/log/krb5kdc.log > Dec 16 13:36:25 ovirtmanage.localdomain krb5kdc[15018](info): AS_REQ (7 > etypes {18 17 16 23 1 3 2}) 10.254.2.226: NEEDED_PREAUTH: admin at TESTINGfor krbtgt/TESTING at TESTING, > Additional pre-authentication required > Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): preauth > (timestamp) verify failure: No matching key in entry > Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): AS_REQ (7 > etypes {18 17 16 23 1 3 2}) 10.254.2.226: PREAUTH_FAILED: admin at TESTINGfor krbtgt/TESTING at TESTING, > Preauthentication failed > > > > Can you help me with this trouble or may be you have some new docs. > > Thank you. > Ivan. > > > _______________________________________________ > Ovirt-devel mailing list > Ovirt-devel at redhat.com > https://www.redhat.com/mailman/listinfo/ovirt-devel > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nicolas.ochem at gmail.com Fri Dec 17 13:51:09 2010 From: nicolas.ochem at gmail.com (Nicolas Ochem) Date: Fri, 17 Dec 2010 14:51:09 +0100 Subject: [Ovirt-devel] roadmap & development In-Reply-To: <5bf411638832c01a3411d2a171542c2bdff48954@terlaak.name> References: <5E35C27E-1B1A-4464-AE31-A9DE5882FCBF@mbl.edu> <5bf411638832c01a3411d2a171542c2bdff48954@terlaak.name> Message-ID: The commit activity is normally in the mailing list. Otherwise you can have a look at the next branch : http://git.fedorahosted.org/git/?p=ovirt/server.git;a=shortlog;h=refs/heads/next ovirt-server in this branch is compatible with fedora 13. It is planned to migrate ovirt-server to RHEL6/centos6 but no work for this has started yet. On Thu, Dec 16, 2010 at 3:48 PM, Menno ter Laak wrote: > LS, > > Is ovirt in Red Hat EL6 or just Fedora 13? I would like to make a test > setup also. > I have 2x Dell R210 servers specced out and 1 HP oldie for management. > > Kind Regards, > > Menno > > > Originele tekst > Van: > Anthony Goddard > > Aan: > > Cc: > > Verstuurd: > Thu, 16 Dec 2010 09:22:52 -0500 > Onderwerp: > [Ovirt-devel] roadmap & development > > > > Hi there, > I'm very interested in oVirt as a management interface for a VM setup we're > building, however it seems as though there isn't much info on the product > roadmap or active development. I'm wondering if anyone could point me to > more information on the roadmap or commit activity on the project? > > Regards, > Anthony > > ------------------------------ > Email sent using Atmail - Email, Groupware and Calendaring done right. > > _______________________________________________ > Ovirt-devel mailing list > Ovirt-devel at redhat.com > https://www.redhat.com/mailman/listinfo/ovirt-devel > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nicolas.ochem at gmail.com Fri Dec 17 13:56:53 2010 From: nicolas.ochem at gmail.com (Nicolas Ochem) Date: Fri, 17 Dec 2010 14:56:53 +0100 Subject: [Ovirt-devel] [PATCH] Introduce ability to select any kind of nic model, not just default or virtio. In-Reply-To: <1286784240-1917-1-git-send-email-nicolas.ochem@gmail.com> References: <1286784240-1917-1-git-send-email-nicolas.ochem@gmail.com> Message-ID: pushed On Mon, Oct 11, 2010 at 10:04 AM, Nicolas Ochem wrote: > There was no release since virtio support was introduced, so a proper > migration is not necessary. > > This amended commit introduces the "default" model which leaves the > model choice up to qemu-kvm. > --- > src/app/controllers/vm_controller.rb | 6 ++- > src/app/models/nic.rb | 2 + > src/app/views/vm/_form.rhtml | 25 +++++++++------- > src/db/migrate/046_add_model_to_nic.rb | 29 ++++++++++++++++++ > src/public/stylesheets/components.css | 51 > +++++++++++++++++++++++-------- > src/task-omatic/task_vm.rb | 5 +-- > src/task-omatic/taskomatic.rb | 2 +- > 7 files changed, 89 insertions(+), 31 deletions(-) > create mode 100644 src/db/migrate/046_add_model_to_nic.rb > > diff --git a/src/app/controllers/vm_controller.rb > b/src/app/controllers/vm_controller.rb > index adc8988..54abd15 100644 > --- a/src/app/controllers/vm_controller.rb > +++ b/src/app/controllers/vm_controller.rb > @@ -199,7 +199,7 @@ class VmController < ApplicationController > nnic = Nic.new(:mac => nic.mac, > :vm_id => @vm.id, > :network => nic.network, > - :virtio => nic.virtio) > + :model => nic.model) > > if(nic.network.boot_type.proto == 'static') > nnic.ip_addresses << IpAddress.new(:address => nic.ip_address) > @@ -221,6 +221,8 @@ class VmController < ApplicationController > @nics.push nnic > } > > + @nic_models = Nic::NIC_MODELS > + > end > > # merges vm / network parameters as submitted on the vm form > @@ -241,7 +243,7 @@ class VmController < ApplicationController > nic = { :mac => params[:macs][i], > :network_id => network_id, > :bandwidth => 0, > - :virtio => params[:virtio][i.to_s] } > + :model => params[:models][i] } > > if(Network.find(network_id).boot_type.proto == 'static') > # FIXME make this able to be v4 or v6 address > diff --git a/src/app/models/nic.rb b/src/app/models/nic.rb > index 51425bc..93aef17 100644 > --- a/src/app/models/nic.rb > +++ b/src/app/models/nic.rb > @@ -53,6 +53,8 @@ class Nic < ActiveRecord::Base > validates_numericality_of :bandwidth, > :greater_than_or_equal_to => 0 > > + NIC_MODELS = > ["default","ne2k_pci","i82551","i82557b","i82559er","rtl8139","e1000","pcnet","virtio"] > + > # Returns whether the nic has networking defined. > def networking? > (network != nil) > diff --git a/src/app/views/vm/_form.rhtml b/src/app/views/vm/_form.rhtml > index 1ab6dda..465733d 100644 > --- a/src/app/views/vm/_form.rhtml > +++ b/src/app/views/vm/_form.rhtml > @@ -67,6 +67,7 @@ >
>
Network:
>
MAC Address:
> +
Model:
> > <%# this column is only populated if a static ip network is > selected: %> > > @@ -92,14 +93,16 @@ > > >
> > -
> -   > +
> + >
> > -
> - <%= hidden_field_tag "virtio[#{i}]", "0" %> > - <%= check_box_tag "virtio[#{i}]", "1", @nics[i].virtio, > :id => "vm_network_config_virtio_#{i}" %> > - <%= label_tag "vm_network_config_virtio_#{i}", "Use virtio" > %> > +
> +   >
> > <% if i != 0 %> > @@ -196,7 +199,7 @@ ${htmlList(pools, id)} > jnic.name = "<%= rnic.network.name %>"; > jnic.mac = "<%= rnic.mac %>"; > jnic.ip = "<%= rnic.ip_address %>"; > - jnic.virtio = <%= rnic.virtio ? 'true' : 'false' %>; > + jnic.model = "<%= rnic.model %>" > jnic.static_ip = <%= rnic.network.boot_type.proto == 'static' %>; > jnic.selected = false; > jnic.row = null; > @@ -270,15 +273,15 @@ ${htmlList(pools, id)} > $('#vm_network_config_mac_'+row).attr('value', nic.mac); > > // show / hide ip address textbox > - ip_div = $('#vm_network_config_mac_'+row).parent().next(); > + ip_div = $('#vm_network_config_model_'+row).parent().next(); > if(nic.static_ip){ > ip_div.html(' id="#vm_network_config_ip_'+row+'" value="'+nic.ip+'" />'); > }else{ > ip_div.html(' '); > } > > - // set virtio if checked > - $('#vm_network_config_virtio_'+row).attr('checked', > nic.virtio ? 'checked' : ''); > + // set model > + $('#vm_network_config_model_'+row).attr('value', nic.model); > > // show new row only if last row's select box was > // previously empty, and if all are not shown > @@ -302,7 +305,7 @@ ${htmlList(pools, id)} > // clear row mac and ip addresses > $('#vm_network_config_mac_'+row).attr('value', ''); > > $('#vm_network_config_mac_'+row).parent().next().html(' '); > - $('#vm_network_config_virtio_'+row).attr('checked', ''); > + //$('#vm_network_config_virtio_'+row).attr('checked', ''); > > // hide row if not the first > if(row != 0){ > diff --git a/src/db/migrate/046_add_model_to_nic.rb > b/src/db/migrate/046_add_model_to_nic.rb > new file mode 100644 > index 0000000..1ec42a9 > --- /dev/null > +++ b/src/db/migrate/046_add_model_to_nic.rb > @@ -0,0 +1,29 @@ > +# Copyright (C) 2010 Alcatel-Lucent > +# Written by Nicolas Ochem > +# > +# This program is free software; you can redistribute it and/or modify > +# it under the terms of the GNU General Public License as published by > +# the Free Software Foundation; version 2 of the License. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > +# MA 02110-1301, USA. A copy of the GNU General Public License is > +# also available at http://www.gnu.org/copyleft/gpl.html. > +class AddModelToNic < ActiveRecord::Migration > + def self.up > + add_column :nics, :model, :string > + remove_column :nics, :virtio > + end > + > + def self.down > + remove_column :nics, :model > + add_column :nics, :virtio, :boolean, :default => false > + end > +end > + > diff --git a/src/public/stylesheets/components.css > b/src/public/stylesheets/components.css > index 3cdbf49..fe4043e 100644 > --- a/src/public/stylesheets/components.css > +++ b/src/public/stylesheets/components.css > @@ -349,41 +349,66 @@ > min-width: 500px; > } > > -#vm_network_config_header_network, > -#vm_network_config_header_mac, > #vm_network_config_header_ip{ > float: left; > - width: 150px; > + width: 102px; > } > > -.vm_network_config_net, > -.vm_network_config_mac{ > +#vm_network_config_header_network{ > + float: left; > + width:92px; > +} > + > +#vm_network_config_header_mac{ > + float: left; > + width: 132px; > +} > + > +#vm_network_config_header_model{ > + float: left; > + width: 76px; > +} > + > +.vm_network_config_net{ > float: left; > - width: 150px; > + width: 92px; > } > > +.vm_network_config_mac{ > + float: left; > + width: 132px; > +} > .vm_network_config_ip{ > float: left; > - max-width: 150px; > + width: 100px; > } > > -.vm_network_config_virtio { > +.vm_network_config_model { > float: left; > - width: 80px; > + width: 76px; > +} > + > +.vm_network_config_ip input{ > + width: 100px; > } > > -.vm_network_config_net select, > -.vm_network_config_mac input, > -.vm_network_config_ip input { > - width: 130px; > +.vm_network_config_net select{ > + width: 90px; > } > > +.vm_network_config_model select { > + width: 74px; > +} > +.vm_network_config_mac input{ > + width:125px; > +} > .vm_network_config_remove { > float: left; > color: #0033CC; > padding-top: 5px; > padding-left: 5px; > } > + > .vm_network_config_remove:hover { > cursor: pointer; > } > diff --git a/src/task-omatic/task_vm.rb b/src/task-omatic/task_vm.rb > index cf84ea2..165363a 100644 > --- a/src/task-omatic/task_vm.rb > +++ b/src/task-omatic/task_vm.rb > @@ -99,10 +99,7 @@ def create_vm_xml(name, uuid, memAllocated, memUsed, > vcpus, bootDevice, > interface.add_attribute("type", "bridge") > interface.add_element("mac", {"address" => nic[:mac]}) > interface.add_element("source", {"bridge" => nic[:interface]}) > - > - if nic[:virtio] > - interface.add_element("model", {"type" => "virtio"}) > - end > + interface.add_element("model", {"type" => nic[:model]}) unless > nic[:model]=="default" > doc.root.elements["devices"] << interface > } > > diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb > index a24a80e..d9efecc 100755 > --- a/src/task-omatic/taskomatic.rb > +++ b/src/task-omatic/taskomatic.rb > @@ -413,7 +413,7 @@ class TaskOmatic > else > net_device = "breth0" # FIXME remove this default at some point > end > - net_interfaces.push({ :mac => nic.mac, :interface => net_device, > :virtio => nic.virtio }) > + net_interfaces.push({ :mac => nic.mac, :interface => net_device, > :model => nic.model }) > } > # network_always indicates that the boot device is "network" and will > not change > # upon reboot. > -- > 1.7.2.1 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From v-defender at ukr.net Fri Dec 17 14:33:12 2010 From: v-defender at ukr.net (Ivan A.Shaposhnikov) Date: Fri, 17 Dec 2010 16:33:12 +0200 Subject: [Ovirt-devel] ovirt install from scratch In-Reply-To: References: <4D0A14B7.3010202@ukr.net> Message-ID: <4D0B74A8.8020006@ukr.net> Thank you for answer, I check again and try to find missing rpm in my system but with no success. Then I do "make ovirt-node-image.iso" again and grep output with any "pxe" but only find Installing: gpxe-roms-qemu ##################### [ 9/331] (( may be thereis any other command to make this rpm? 17.12.2010 15:48, Nicolas Ochem ?????: > Hello, > When you build ovirt-node-image.iso you should also have built > ovirt-node-image-pxe rpm. Install this rpm manually and the waring > about the missing rpm will disappear. > About freeipa/kerberos error, this is not related to ovirt. Maybe > ovirt-server will work anyway ? You should look into kerberos and/or > freeipa for answers. > > On Thu, Dec 16, 2010 at 2:31 PM, Ivan A.Shaposhnikov > > wrote: > > Hello to all. > I am have a question about installation process of oVirt project. > I am using instruction from this resource > https://fedorahosted.org/ovirt/wiki/Build. > > I use fresh install of fedora 13. > > I am build node rmps > and > > ovirt-node-image.iso > > But have some problems with install ovirt management node. > > I run > ace -d install ovirt > > and attach output. > > I see that > > Main qestion about > that i see some error > > //cobbler::bundled/Package[ovirt-node-image-pxe]/ensure: change > from absent to present failed: Could not find package > ovirt-node-image-pxe > > where to find this package?? > > and second trouble with kerberos i thin because > > /bin/echo ovirt|/usr/kerberos/bin/kinit admin] has 1 failures > > > /usr/kerberos/bin/kinit admin > Password for admin at TESTING: > kinit: Preauthentication failed while getting initial credentials > > tail -f /var/log/krb5kdc.log > Dec 16 13:36:25 ovirtmanage.localdomain krb5kdc[15018](info): > AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226 > : NEEDED_PREAUTH: admin at TESTING for > krbtgt/TESTING at TESTING, Additional pre-authentication required > Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): > preauth (timestamp) verify failure: No matching key in entry > Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): > AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226 > : PREAUTH_FAILED: admin at TESTING for > krbtgt/TESTING at TESTING, Preauthentication failed > > > > Can you help me with this trouble or may be you have some new docs. > > Thank you. > Ivan. > > > _______________________________________________ > Ovirt-devel mailing list > Ovirt-devel at redhat.com > https://www.redhat.com/mailman/listinfo/ovirt-devel > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From apevec at gmail.com Fri Dec 17 14:53:27 2010 From: apevec at gmail.com (Alan Pevec) Date: Fri, 17 Dec 2010 15:53:27 +0100 Subject: [Ovirt-devel] ovirt install from scratch In-Reply-To: <4D0B74A8.8020006@ukr.net> References: <4D0A14B7.3010202@ukr.net> <4D0B74A8.8020006@ukr.net> Message-ID: On Fri, Dec 17, 2010 at 3:33 PM, Ivan A.Shaposhnikov wrote: > may be thereis any other command to make this rpm? make rpms in ovirt/node-image.git 'next' branch should produce ovirt-node-image* RPMs ovirt-node-image RPM just wraps node ISO, it's deprecated and instead ISO should be used directly by the ovirt-server installer. See in ovirt-node-image-pxe %post, it's just two lines which need to be added. Alan From mburns at redhat.com Fri Dec 17 14:54:04 2010 From: mburns at redhat.com (Mike Burns) Date: Fri, 17 Dec 2010 09:54:04 -0500 Subject: [Ovirt-devel] ovirt install from scratch In-Reply-To: <4D0B74A8.8020006@ukr.net> References: <4D0A14B7.3010202@ukr.net> <4D0B74A8.8020006@ukr.net> Message-ID: <1292597644.3478.264.camel@beelzebub.mburnsfire.net> On Fri, 2010-12-17 at 16:33 +0200, Ivan A.Shaposhnikov wrote: > Thank you for answer, > I check again and try to find missing rpm in my system but with no success. > > Then I do "make ovirt-node-image.iso" again and grep output with any > "pxe" but only find > > Installing: gpxe-roms-qemu ##################### [ > 9/331] (( > > may be thereis any other command to make this rpm? There is currently a gap in the ovirt-node code that we don't generate the ovirt-node-image rpms anymore. Ideally, the server shouldn't require this package anymore. In the meantime, you can try pulling down the ovirt-node-image repository and run ./autogen.sh make rpms I don't know for sure if this will work or not, though as I haven't run it recently. > > > > > 17.12.2010 15:48, Nicolas Ochem ?????: > > Hello, > > When you build ovirt-node-image.iso you should also have built > > ovirt-node-image-pxe rpm. Install this rpm manually and the waring > > about the missing rpm will disappear. > > About freeipa/kerberos error, this is not related to ovirt. Maybe > > ovirt-server will work anyway ? You should look into kerberos and/or > > freeipa for answers. > > > > On Thu, Dec 16, 2010 at 2:31 PM, Ivan A.Shaposhnikov > > > wrote: > > > > Hello to all. > > I am have a question about installation process of oVirt project. > > I am using instruction from this resource > > https://fedorahosted.org/ovirt/wiki/Build. > > > > I use fresh install of fedora 13. > > > > I am build node rmps > > and > > > > ovirt-node-image.iso > > > > But have some problems with install ovirt management node. > > > > I run > > ace -d install ovirt > > > > and attach output. > > > > I see that > > > > Main qestion about > > that i see some error > > > > //cobbler::bundled/Package[ovirt-node-image-pxe]/ensure: change > > from absent to present failed: Could not find package > > ovirt-node-image-pxe > > > > where to find this package?? > > > > and second trouble with kerberos i thin because > > > > /bin/echo ovirt|/usr/kerberos/bin/kinit admin] has 1 failures > > > > > > /usr/kerberos/bin/kinit admin > > Password for admin at TESTING: > > kinit: Preauthentication failed while getting initial credentials > > > > tail -f /var/log/krb5kdc.log > > Dec 16 13:36:25 ovirtmanage.localdomain krb5kdc[15018](info): > > AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226 > > : NEEDED_PREAUTH: admin at TESTING for > > krbtgt/TESTING at TESTING, Additional pre-authentication required > > Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): > > preauth (timestamp) verify failure: No matching key in entry > > Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): > > AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226 > > : PREAUTH_FAILED: admin at TESTING for > > krbtgt/TESTING at TESTING, Preauthentication failed > > > > > > > > Can you help me with this trouble or may be you have some new docs. > > > > Thank you. > > Ivan. > > > > > > _______________________________________________ > > Ovirt-devel mailing list > > Ovirt-devel at redhat.com > > https://www.redhat.com/mailman/listinfo/ovirt-devel > > > > > > _______________________________________________ > Ovirt-devel mailing list > Ovirt-devel at redhat.com > https://www.redhat.com/mailman/listinfo/ovirt-devel -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 5913 bytes Desc: not available URL: From v-defender at ukr.net Mon Dec 20 16:29:53 2010 From: v-defender at ukr.net (Ivan A.Shaposhnikov) Date: Mon, 20 Dec 2010 18:29:53 +0200 Subject: [Ovirt-devel] ovirt install from scratch In-Reply-To: <1292597644.3478.264.camel@beelzebub.mburnsfire.net> References: <4D0A14B7.3010202@ukr.net> <4D0B74A8.8020006@ukr.net> <1292597644.3478.264.camel@beelzebub.mburnsfire.net> Message-ID: <4D0F8481.7060308@ukr.net> Hello to All. I am started to reinstall all system and now arter some errors in ace_output err: //ovirt::setup/Package[qpidd]/ensure: change from absent to present failed: Could not find package qpidd i think this is minor error because qpidd is old name of package err: //cobbler::bundled/Package[ovirt-node-image-pxe]/ensure: change from absent to present failed: Could not find package ovirt-node-image-pxe i do not know how to biuid this rpm yet err: //ovirt::setup/Single_exec[db_migrate]/returns: change from notrun to 0 failed: /usr/bin/rake db:migrate returned 1 instead of 0 at /usr/share/ace/modules/ovirt/manifests/ovirt.pp:105 And when I try to start oVirt startup scripts I take this error /etc/init.d/ovirt-agent start Starting ovirt-agent: Missing the Rails 2.3.2 gem. Please `gem install -v=2.3.2 rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed. Can you tell me how to fix this error. I am doen not know any about RAILS. Thank for you answers. Ivan 17.12.2010 16:54, Mike Burns ?????: > On Fri, 2010-12-17 at 16:33 +0200, Ivan A.Shaposhnikov wrote: >> Thank you for answer, >> I check again and try to find missing rpm in my system but with no success. >> >> Then I do "make ovirt-node-image.iso" again and grep output with any >> "pxe" but only find >> >> Installing: gpxe-roms-qemu ##################### [ >> 9/331] (( >> >> may be thereis any other command to make this rpm? > There is currently a gap in the ovirt-node code that we don't generate > the ovirt-node-image rpms anymore. Ideally, the server shouldn't > require this package anymore. > > In the meantime, you can try pulling down the ovirt-node-image > repository and run > ./autogen.sh > make rpms > > I don't know for sure if this will work or not, though as I haven't run > it recently. >> >> >> >> 17.12.2010 15:48, Nicolas Ochem ?????: >>> Hello, >>> When you build ovirt-node-image.iso you should also have built >>> ovirt-node-image-pxe rpm. Install this rpm manually and the waring >>> about the missing rpm will disappear. >>> About freeipa/kerberos error, this is not related to ovirt. Maybe >>> ovirt-server will work anyway ? You should look into kerberos and/or >>> freeipa for answers. >>> >>> On Thu, Dec 16, 2010 at 2:31 PM, Ivan A.Shaposhnikov >>> > wrote: >>> >>> Hello to all. >>> I am have a question about installation process of oVirt project. >>> I am using instruction from this resource >>> https://fedorahosted.org/ovirt/wiki/Build. >>> >>> I use fresh install of fedora 13. >>> >>> I am build node rmps >>> and >>> >>> ovirt-node-image.iso >>> >>> But have some problems with install ovirt management node. >>> >>> I run >>> ace -d install ovirt >>> >>> and attach output. >>> >>> I see that >>> >>> Main qestion about >>> that i see some error >>> >>> //cobbler::bundled/Package[ovirt-node-image-pxe]/ensure: change >>> from absent to present failed: Could not find package >>> ovirt-node-image-pxe >>> >>> where to find this package?? >>> >>> and second trouble with kerberos i thin because >>> >>> /bin/echo ovirt|/usr/kerberos/bin/kinit admin] has 1 failures >>> >>> >>> /usr/kerberos/bin/kinit admin >>> Password for admin at TESTING: >>> kinit: Preauthentication failed while getting initial credentials >>> >>> tail -f /var/log/krb5kdc.log >>> Dec 16 13:36:25 ovirtmanage.localdomain krb5kdc[15018](info): >>> AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226 >>> : NEEDED_PREAUTH: admin at TESTING for >>> krbtgt/TESTING at TESTING, Additional pre-authentication required >>> Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): >>> preauth (timestamp) verify failure: No matching key in entry >>> Dec 16 13:36:33 ovirtmanage.localdomain krb5kdc[15018](info): >>> AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.254.2.226 >>> : PREAUTH_FAILED: admin at TESTING for >>> krbtgt/TESTING at TESTING, Preauthentication failed >>> >>> >>> >>> Can you help me with this trouble or may be you have some new docs. >>> >>> Thank you. >>> Ivan. >>> >>> >>> _______________________________________________ >>> Ovirt-devel mailing list >>> Ovirt-devel at redhat.com >>> https://www.redhat.com/mailman/listinfo/ovirt-devel >>> >>> >> _______________________________________________ >> Ovirt-devel mailing list >> Ovirt-devel at redhat.com >> https://www.redhat.com/mailman/listinfo/ovirt-devel