[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: openssh + pam authentication failing +md5 (?!) HELP HELP HELP !



Hi all,

I added pam_warn to the pam sshd file and paste the info below which might also shed some light on my problem :(

May  6 16:00:45 sp32a PAM-warn[1025]: service: sshd [on terminal: NODEVssh]
May  6 16:00:45 sp32a PAM-warn[1025]: user: (uid=0) -> testuser [remote: ?nobody@192.168.300.2]
May  6 16:04:35 sp32a PAM-warn[1151]: service: sshd [on terminal: NODEVssh]
May  6 16:04:35 sp32a PAM-warn[1151]: user: (uid=0) -> testuser [remote: ?nobody@192.168.300.1]
May  6 16:04:35 sp32a PAM-warn[1151]: service: sshd [on terminal: NODEVssh]
May  6 16:04:35 sp32a PAM-warn[1151]: user: (uid=0) -> testuser [remote: ?nobody@192.168.300.2]





> "light storm" <lightstorm@antionline.org> pam-list@redhat.comCc: vorlon@netexpress.net
> Re: openssh + pam authentication failing +md5 (?!) HELP HELP HELP !Reply-To: pam-list@redhat.com
>Date: Fri, 3 May 2002 11:10:01 -0700
>
>Hello Steve,
>
>First of all thanks for anytime you put in my problem, really appreciate all the help cause i just don't see it :(
>
>I'll paste here the additional information which might help solve this:
>
>(note: openssh was compiled with pam support and md5 support)
>
>
>sshd pam file for openssh in /etc/pam.d/
>
>#%PAM-1.0
>auth     required       /lib/security/pam_unix.so       # set_secrpc
>auth     required       /lib/security/pam_nologin.so
>auth     required       /lib/security/pam_env.so
>account  required       /lib/security/pam_unix.so
>password required       /lib/security/pam_pwcheck.so    md5
>password required       /lib/security/pam_unix.so       md5
>use_first_pass use_authtok
>session  required       /lib/security/pam_unix.so       none # trace or
>debug
>session  required       /lib/security/pam_limits.so  
>
>sshd_config file:
>
>
># for more information.
> 
># This sshd was compiled with
>PATH=/usr/bin:/bin:/usr/sbin:/sbin:/opt/bin
> 
># The strategy used for options in the default sshd_config shipped with
># OpenSSH is to specify options with their default value where
># possible, but leave them commented.  Uncommented options change a
># default value.
> 
>#Port 22
>#Protocol 2,1
>#ListenAddress 0.0.0.0
>#ListenAddress ::
> 
># HostKey for protocol version 1
>#HostKey /etc/ssh/ssh_host_key
># HostKeys for protocol version 2
>#HostKey /etc/ssh/ssh_host_rsa_key
>#HostKey /etc/ssh/ssh_host_dsa_key
> 
># Lifetime and size of ephemeral version 1 server key
>#KeyRegenerationInterval 3600
>ServerKeyBits 1024
> 
># Logging
>#obsoletes QuietMode and FascistLogging
>#SyslogFacility AUTH
>#LogLevel INFO
> 
># Authentication:
> 
>#LoginGraceTime 600
>#PermitRootLogin yes
>#StrictModes yes
> 
>#RSAAuthentication yes
>#PubkeyAuthentication yes
>#AuthorizedKeysFile     .ssh/authorized_keys
> 
># rhosts authentication should not be used
>#RhostsAuthentication no
># Don't read the user's ~/.rhosts and ~/.shosts files
>#IgnoreRhosts yes
># For this to work you will also need host keys in
>/etc/ssh/ssh_known_hosts
>#RhostsRSAAuthentication no
># similar for protocol version 2
>#HostbasedAuthentication no  
># Change to yes if you don't trust ~/.ssh/known_hosts for
># RhostsRSAAuthentication and HostbasedAuthentication
>#IgnoreUserKnownHosts no
> 
># To disable tunneled clear text passwords, change to no here!
>#PasswordAuthentication yes
>#PermitEmptyPasswords no
> 
># Change to no to disable s/key passwords
>#ChallengeResponseAuthentication yes
> 
># Kerberos options
># KerberosAuthentication automatically enabled if keyfile exists
>#KerberosAuthentication yes
>#KerberosOrLocalPasswd yes
>#KerberosTicketCleanup yes
> 
># AFSTokenPassing automatically enabled if k_hasafs() is true
>#AFSTokenPassing yes
> 
># Kerberos TGT Passing only works with the AFS kaserver
>#KerberosTgtPassing no
> 
># Set this to 'yes' to enable PAM keyboard-interactive authentication  
># Warning: enabling this may bypass the setting of
>'PasswordAuthentication'
>#PAMAuthenticationViaKbdInt yes
> 
>#X11Forwarding no
>#X11DisplayOffset 10
>#X11UseLocalhost yes
>#PrintMotd yes
>#PrintLastLog yes
>#KeepAlive yes
>#UseLogin no
> 
>#MaxStartups 10
># no default banner path
>#Banner /some/path
>#VerifyReverseMapping no
> 
># override default of no subsystems
>Subsystem       sftp    /opt/libexec/sftp-server    
>
>
>||||||||||||||
>
>on server with sshd -d -d -d :
>
>debug1: sshd version OpenSSH_3.1p1
>debug1: private host key: #0 type 0 RSA1
>debug3: Not a RSA1 key file /etc/ssh/ssh_host_rsa_key.
>debug1: read PEM private key done: type RSA
>debug1: private host key: #1 type 1 RSA
>debug3: Not a RSA1 key file /etc/ssh/ssh_host_dsa_key.
>debug1: read PEM private key done: type DSA
>debug1: private host key: #2 type 2 DSA
>debug1: Forcing server key to 1152 bits to make it differ from host key.
>socket: Address family not supported by protocol
>debug1: Bind to port 22 on 0.0.0.0.
>Server listening on 0.0.0.0 port 22.
>Generating 1152 bit RSA key.
>RSA key generation complete.
>debug1: Server will not fork when running in debugging mode.
>Connection from 192.168.100.100 port 34864
>debug1: Client protocol version 2.0; client software version
>OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9
>debug1: match: OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9 pat OpenSSH*
>Enabling compatibility mode for protocol 2.0
>debug1: Local version string SSH-1.99-OpenSSH_3.1p1
>debug1: list_hostkey_types: ssh-rsa,ssh-dss
>debug1: SSH2_MSG_KEXINIT sent
>debug1: SSH2_MSG_KEXINIT received
>debug2: kex_parse_kexinit:
>diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
>debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit: none,zlib
>debug2: kex_parse_kexinit: none,zlib
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit: first_kex_follows 0
>debug2: kex_parse_kexinit: reserved 0
>debug2: kex_parse_kexinit:
>diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
>debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,rijndael256-cbc,rijndael-cbc@lysator.liu.se
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,rijndael256-cbc,rijndael-cbc@lysator.liu.se
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit: zlib
>debug2: kex_parse_kexinit: zlib
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit: first_kex_follows 0
>debug2: kex_parse_kexinit: reserved 0
>debug2: mac_init: found hmac-md5
>debug1: kex: client->server aes128-cbc hmac-md5 zlib
>debug2: mac_init: found hmac-md5
>debug1: kex: server->client aes128-cbc hmac-md5 zlib
>debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
>debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
>debug1: dh_gen_key: priv key bits set: 130/256
>debug1: bits set: 1561/3191
>debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
>debug1: bits set: 1593/3191
>debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
>debug1: kex_derive_keys
>debug1: newkeys: mode 1
>debug1: Enabling compression at level 6.
>debug1: SSH2_MSG_NEWKEYS sent
>debug1: waiting for SSH2_MSG_NEWKEYS
>debug1: newkeys: mode 0
>debug1: SSH2_MSG_NEWKEYS received
>debug1: KEX done
>debug1: userauth-request for user testuser service ssh-connection method
>none
>debug1: attempt 0 failures 0
>debug2: input_userauth_request: setting up authctxt for testuser
>debug1: Starting up PAM with username "testuser"
>debug3: Trying to reverse map address 192.168.100.100.
>debug1: PAM setting rhost to "cper.tter.org"
>debug2: input_userauth_request: try method none
>Failed none for testuser from 192.168.100.100 port 34864 ssh2
>debug1: userauth-request for user testuser service ssh-connection method
>keyboard-interactive
>debug1: attempt 1 failures 1
>debug2: input_userauth_request: try method keyboard-interactive
>debug1: keyboard-interactive devs
>debug1: auth2_challenge: user=testuser devs=
>debug1: kbdint_alloc: devices ''
>debug2: auth2_challenge_start: devices
>Failed keyboard-interactive for testuser from 192.168.100.100 port 34864
>ssh2
>debug1: userauth-request for user testuser service ssh-connection method
>password
>debug1: attempt 2 failures 2
>debug2: input_userauth_request: try method password
>debug1: PAM Password authentication for "testuser" failed[7]:
>Authentication failure
>Failed password for testuser from 192.168.100.100 port 34864 ssh2
>debug1: userauth-request for user testuser service ssh-connection method password
>debug1: attempt 3 failures 3
>debug2: input_userauth_request: try method password
>debug1: PAM Password authentication for "testuser" failed[7]:
>Authentication failure
>Failed password for testuser from 192.168.100.100 port 34864 ssh2
>debug1: userauth-request for user testuser service ssh-connection method
>password
>debug1: attempt 4 failures 4
>debug2: input_userauth_request: try method password
>debug1: PAM Password authentication for "testuser" failed[7]:
>Authentication failure
>Failed password for testuser from 192.168.100.100 port 34864 ssh2
>Connection closed by 192.168.100.100
>debug1: Calling cleanup 0x80524a0(0x0)
>debug1: Calling cleanup 0x8068e10(0x0)
>debug1: compress outgoing: raw data 242, compressed 85, factor 0.35
>debug1: compress incoming: raw data 293, compressed 146, factor 0.50   
>
>|||||||||||||||
>
>
>from remote system with ssh -C -v -v -v :
>
>OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9, SSH protocols 1.5/2.0, OpenSSL
>0x0090603f
>debug1: Reading configuration data /etc/ssh/ssh_config
>debug1: Seeding random number generator
>debug1: Rhosts Authentication disabled, originating port will not be
>trusted.
>debug1: restore_uid
>debug1: ssh_connect: getuid 1027 geteuid 1027 anon 1
>debug1: Connecting to 192.168.200.200 [192.168.200.200] port 22.
>debug1: temporarily_use_uid: 1027/1027 (e=1027)
>debug1: restore_uid
>debug1: temporarily_use_uid: 1027/1027 (e=1027)
>debug1: restore_uid
>debug1: Connection established.
>debug1: identity file /home/testuser/.ssh/identity type -1
>debug1: identity file /home/testuser/.ssh/id_rsa type -1
>debug1: identity file /home/testuser/.ssh/id_dsa type -1
>debug1: Remote protocol version 1.99, remote software version
>OpenSSH_3.1p1
>debug1: match: OpenSSH_3.1p1 pat ^OpenSSH
>Enabling compatibility mode for protocol 2.0
>debug1: Local version string SSH-2.0-OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9
>debug1: SSH2_MSG_KEXINIT sent
>debug1: SSH2_MSG_KEXINIT received
>debug2: kex_parse_kexinit:
>diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
>debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,rijndael256-cbc,rijndael-cbc@lysator.liu.se
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,rijndael256-cbc,rijndael-cbc@lysator.liu.se
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit: zlib
>debug2: kex_parse_kexinit: zlib
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit: first_kex_follows 0
>debug2: kex_parse_kexinit: reserved 0
>debug2: kex_parse_kexinit:
>diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
>debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
>debug2: kex_parse_kexinit:
>aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit:
>hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
>debug2: kex_parse_kexinit: none,zlib
>debug2: kex_parse_kexinit: none,zlib
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit:
>debug2: kex_parse_kexinit: first_kex_follows 0
>debug2: kex_parse_kexinit: reserved 0
>debug2: mac_init: found hmac-md5
>debug1: kex: server->client aes128-cbc hmac-md5 zlib
>debug2: mac_init: found hmac-md5
>debug1: kex: client->server aes128-cbc hmac-md5 zlib
>debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
>debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
>debug1: dh_gen_key: priv key bits set: 135/256
>debug1: bits set: 1593/3191
>debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
>debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
>debug3: check_host_in_hostfile: filename /home/testuser/.ssh/known_hosts
>debug3: check_host_in_hostfile: filename /etc/ssh/ssh_known_hosts
>The authenticity of host '192.168.200.200 (192.168.200.200)' can't be
>established.
>RSA key fingerprint is 27:19:b8:ba:69:e7:91:9a:b3:00:09:c4:a8:f6:be:e0.
>Are you sure you want to continue connecting (yes/no)? yes
>Warning: Permanently added '192.168.200.200' (RSA) to the list of known
>hosts.
>debug1: bits set: 1561/3191
>debug1: ssh_rsa_verify: signature correct
>debug1: kex_derive_keys
>debug1: newkeys: mode 1
>debug1: Enabling compression at level 6.
>debug1: SSH2_MSG_NEWKEYS sent
>debug1: waiting for SSH2_MSG_NEWKEYS
>debug1: newkeys: mode 0
>debug1: SSH2_MSG_NEWKEYS received
>debug1: done: ssh_kex2.
>debug1: send SSH2_MSG_SERVICE_REQUEST
>debug1: service_accept: ssh-userauth
>debug1: got SSH2_MSG_SERVICE_ACCEPT
>debug1: authentications that can continue:
>publickey,password,keyboard-interactive
>debug3: start over, passed a different list
>publickey,password,keyboard-interactive
>debug3: preferred publickey,keyboard-interactive,password
>debug3: authmethod_lookup publickey
>debug3: remaining preferred: keyboard-interactive,password
>debug3: authmethod_is_enabled publickey
>debug1: next auth method to try is publickey
>debug1: try privkey: /home/testuser/.ssh/identity
>debug3: no such identity: /home/testuser/.ssh/identity
>debug1: try privkey: /home/testuser/.ssh/id_rsa
>debug3: no such identity: /home/testuser/.ssh/id_rsa
>debug1: try privkey: /home/testuser/.ssh/id_dsa
>debug3: no such identity: /home/testuser/.ssh/id_dsa
>debug2: we did not send a packet, disable method
>debug3: authmethod_lookup keyboard-interactive
>debug3: remaining preferred: password
>debug3: authmethod_is_enabled keyboard-interactive
>debug1: next auth method to try is keyboard-interactive
>debug2: userauth_kbdint
>debug2: we sent a keyboard-interactive packet, wait for reply
>debug1: authentications that can continue:
>publickey,password,keyboard-interactive
>debug3: userauth_kbdint: disable: no info_req_seen
>debug2: we did not send a packet, disable method
>debug3: authmethod_lookup password
>debug3: remaining preferred:
>debug3: authmethod_is_enabled password
>debug1: next auth method to try is password
>testuser@192.168.200.200's password:
>debug1: packet_send2: adding 16 (len 43 padlen 5 extra_pad 64)
>debug2: we sent a password packet, wait for reply
>debug1: authentications that can continue:
>publickey,password,keyboard-interactive
>Permission denied, please try again.
>testuser@192.168.200.200's password:
>debug1: packet_send2: adding 32 (len 17 padlen 15 extra_pad 64)
>debug2: we sent a password packet, wait for reply
>debug1: authentications that can continue:
>publickey,password,keyboard-interactive
>Permission denied, please try again.
>testuser@192.168.200.200's password:
>debug1: packet_send2: adding 32 (len 19 padlen 13 extra_pad 64)
>debug2: we sent a password packet, wait for reply
>debug1: authentications that can continue:
>publickey,password,keyboard-interactive
>debug2: we did not send a packet, disable method
>debug1: no more auth methods to try
>Permission denied (publickey,password,keyboard-interactive).
>debug1: Calling cleanup 0x80633cc(0x0)
>debug1: compress outgoing: raw data 293, compressed 146, factor 0.50
>debug1: compress incoming: raw data 242, compressed 85, factor 0.35
>
>
>
>extra information passwd (pam file):
>
>#%PAM-1.0
>auth     required       /lib/security/pam_unix.so       nullok
>account  required       /lib/security/pam_unix.so
>password required       /lib/security/pam_pwcheck.so    nullok md5
>password required       /lib/security/pam_unix.so       nullok md5
>use_first_pass use_authtok
>session  required      
>/lib/security/pam_unix.so                                                  
>
>
>other extra information:
>
>ldd /opt/sbin/sshd
>        libpam.so.0 => /lib/libpam.so.0 (0x4002a000)
>        libdl.so.2 => /lib/libdl.so.2 (0x40032000)
>        libutil.so.1 => /lib/libutil.so.1 (0x40035000)
>        libz.so.1 => /lib/libz.so.1 (0x40038000)
>        libnsl.so.1 => /lib/libnsl.so.1 (0x40047000)
>        libcrypto.so.0.9.6 => /usr/lib/libcrypto.so.0.9.6 (0x4005d000)
>        libc.so.6 => /lib/libc.so.6 (0x4011e000)
>        /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)     
>
>ldd /usr/bin/passwd
>        libcrypt.so.1 => /lib/libcrypt.so.1 (0x4002a000)
>        libcrack.so.2 => /usr/lib/libcrack.so.2 (0x40058000)
>        libpam.so.0 => /lib/libpam.so.0 (0x40064000)
>        libpam_misc.so.0 => /lib/libpam_misc.so.0 (0x4006c000)
>        libdl.so.2 => /lib/libdl.so.2 (0x4006f000)
>        libc.so.6 => /lib/libc.so.6 (0x40072000)
>        /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
>
>
>
>
>
>> Steve Langasek <vorlon@netexpress.net> pam-list@redhat.com Re: openssh + pam authentication failing +md5 (?!) HELP HELP HELP !Reply-To: pam-list@redhat.com
>>Date: Fri, 3 May 2002 11:28:33 -0500
>>
>>On Fri, May 03, 2002 at 02:12:51AM -0700, light storm wrote:
>>> This is the first time i really needed to seek the help of some one
>>> who has alot more expertise on this subject since i have almost no
>>> hair left on my head which i didn't pull out ;-) 
>>
>>> I have installed: openssh 3.1 , openssl 0.9.6a and i use PAM , most
>>> things work perfect, till i wanted to use pam for ssh, i enable also
>>> pam support for openssh, also enable md5 passwords support for openssh
>>> , added the correct information to the pam file (/etc/pam.d/sshd) like
>>> 'md5' , but when i try to login from various servers to that server
>>> then shortly said i get "PAM authentication failed, permission denied
>>> ... " . that is the problem hehe
>>
>>> Paste:
>>
>>> Failed password for testuser from 192.168.150.52 port 34440 ssh2 
>>> debug1: userauth-request for user testuser service ssh-connection method 
>>> password 
>>> debug1: attempt 3 failures 3 
>>> debug2: input_userauth_request: try method password 
>>> debug1: PAM Password authentication for "testuser" failed[7]: 
>>> Authentication failure 
>>> ...     
>>
>>> my sshd_config, ssh_config are all correctly configured, beside the
>>> above passwd/login are also using PAM, no problem
>>
>>> i did a test, i created with another tool a password for testuser, not
>>> md5, all of a sudden ssh worked (!??) , but when i change the pass
>>> with passwd (it then gets to be a md5) ssh refuses :((( ..
>>
>>> IMHO something goes wrong when the md5 password is read by PAM and
>>> that causes openssh to say permission denied ... but guys, what in
>>> godsname goes wrong or what did i do wrong ? 
>>
>>
>>> PS: the generic pam sshd file is what i use, added the md5 to it.
>>
>>Please post the full contents of the exact PAM configuration you're
>>using for sshd.  There are many different 'default' configurations in
>>existence, and it's impossible to diagnose this error without knowing
>>what your particular configuration looks like.
>>
>>Steve Langasek
>>postmodern programmer
>>-----BEGIN PGP SIGNATURE-----
>>Version: GnuPG v1.0.6 (GNU/Linux)
>>Comment: For info see http://www.gnupg.org
>>
>>iD8DBQE80rqtKN6ufymYLloRAo+ZAJ4508T5jj7vTWmLfkpd6Lw+CQQ/IACfZWea
>>522dURA5d4g8Gk6pKaCRJP4=
>>=cNlF
>>-----END PGP SIGNATURE-----
>
>
>------------------------------------------------------------
>Email account furnished courtesy of AntiOnline - http://www.AntiOnline.com
>AntiOnline - The Internet's Information Security Super Center!
>
>
>---------------------------------------------------------------------
>Express yourself with a super cool email address from BigMailBox.com.
>Hundreds of choices. It's free!
>http://www.bigmailbox.com
>---------------------------------------------------------------------
>
>
>
>_______________________________________________
>Pam-list mailing list
>Pam-list@redhat.com
>https://listman.redhat.com/mailman/listinfo/pam-list


------------------------------------------------------------
Email account furnished courtesy of AntiOnline - http://www.AntiOnline.com
AntiOnline - The Internet's Information Security Super Center!


---------------------------------------------------------------------
Express yourself with a super cool email address from BigMailBox.com.
Hundreds of choices. It's free!
http://www.bigmailbox.com
---------------------------------------------------------------------





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index] []