LVS error: "bad load average"

[Sébastien BONNET]

Michael,

Dig in the list archives for a patch I've released to solve this problem 
and explainations on how to use ruptime successfully.

Regards,

Michael Green wrote:
> Getting the following errors in the log file from the LVS:
> 
> May 17 12:57:58 biocsm nanny[7310]: bad load average returned: biocl1 
>       up  13+02:00,     0 users,  load 2.00, 1.98, 1.90 biocl2     up 
> 13+02:13,     0 users,  load 1.98, 1.96, 1.90 biocl3        up 
> 13+02:13,     0 users,  load 0.98, 0.96, 0.91 biocl4        up
> 13+02:12,     0 users,  load 2.00, 2.00, 1.91 biocl5        up 
> 13+02:13,     0 users,  load 1.98, 1.96, 1.90 biocl6        up 
> 13+02:13,     0 users,  load 1.98, 1.96, 1.90 biocsm        up 
> 13+22:08,     0 users,  load 0.00, 0.00, 0.00
> May 17 12:57:58 biocsm nanny[7305]: bad load average returned: biocl1 
>       up  13+02:00,     0 users,  load 2.00, 1.98, 1.90 biocl2     up 
> 13+02:13,     0 users,  load 1.98, 1.96, 1.90 biocl3        up 
> 13+02:13,     0 users,  load 0.98, 0.96, 0.91 biocl4        up
> 13+02:12,     0 users,  load 2.00, 2.00, 1.91 biocl5        up 
> 13+02:13,     0 users,  load 1.98, 1.96, 1.90 biocl6        up 
> 13+02:13,     0 users,  load 1.98, 1.96, 1.90 biocsm        up 
> 13+22:08,     0 users,  load 0.00, 0.00, 0.00
> 
> and so on... the /var/log/messages is literally flooded with these...
> 
> I've googled, I've search through the LVS & Piranha mail lists and
> found that other people also had same problem, but I havn't found any
> definitive answer.
> 
> Please help.
> 
> My lvs.cf is as following:
> 
> [root at biocsm ha]# more lvs.cf
> serial_no = 35
> primary = 132.77.90.131
> service = lvs
> backup = 0.0.0.0
> heartbeat = 1
> heartbeat_port = 539
> keepalive = 6
> deadtime = 18
> network = nat
> nat_router = 192.168.1.30 eth1:1
> debug_level = NONE
> virtual HTTP {
>      active = 1
>      address = 132.77.90.131 eth0:1
>      vip_nmask = 255.255.255.0
>      port = 80
>      send = "GET / HTTP/1.0\r\n\r\n"
>      expect = "HTTP"
>      use_regex = 0
>      load_monitor = ruptime
>      scheduler = wlc
>      protocol = tcp
>      timeout = 6
>      reentry = 15
>      quiesce_server = 1
>      server biocl1 {
>          address = 192.168.1.31
>          active = 1
>          weight = 1
>      }
>      server biocl2 {
>          address = 192.168.1.32
>          active = 1
>          weight = 1
>      }
>      server biocl3 {
>          address = 192.168.1.33
>          active = 1
>          weight = 1
>      }
>      server biocl4 {
>          address = 192.168.1.34
>          active = 1
>          weight = 1
>      }
>      server biocl5 {
>          address = 192.168.1.35
>          active = 1
>          weight = 1
>      }
>      server biocl6 {
>          address = 192.168.1.36
>          active = 1
>          weight = 1
>      }
> }
> 
> 

-- 
Sébastien BONNET     --    Ingénieur système
Tel: 04.42.25.15.40      GSM: 06.64.44.58.98