[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: USB Camera and SCSI Mass Storage device



On Sunday 02 February 2003 01:06 pm, Dan Devine wrote:
> Hi all,
> 
> I'm attempting to make the connection to my "Fuji Finepix 3800" 
camera. 
> This unit is not supported through "Gtkam" in the RH8.0 distro and 
the
> autodetect feature does not bring up anything, but no worries right?
> 
> I've read the how-to on usb cameras and found that this unit is a
> "mass-storage" device.
> The How-to describes connecting this type of device through the SCSI
> stack, but I cannot figure out WHICH scsi device I'm supposed to 
enter
> into /etc/fstab.
> 
> When I investigate, I find the connected cammera appears/disappears
> according to plugged status in the following location:
> 
> /proc/scsi/usb-storage-1/2
> 
> When I query the device at that location ( "less
> /proc/scsi/usb-storage-1/2") I get info on the camera!  Awsome!
> 
> I also have a CD-ROM which is located in the SCSI stack too.  When I
> look at the /proc/scsi/scsi file, this is what it says:
> 
> Attached devices:
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>   Vendor: ASUS     Model: CRW-4816A        Rev: 1.0
>   Type:   CD-ROM                           ANSI SCSI revision: 02
> scsi (END)
> 
> 
> 
> Where does this device map into the "/dev/sd?" map?  The how-to is a
> little unclear on this, just has some examples of entries to the
> /etc/fstab file.....

Do you have a directory /proc/scsi/ide-scsi?  If so then your CDROM is 
being emulated as a SCSI device.  If it is the only emulated CDROM it 
is mapped to /dev/scd0

-- 
Stephen Carville http://www.heronforge.net/~stephen/gnupgkey.txt
Blessed are those who, in the face of death, think only of the front 
sight.





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]