[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: PCMCIA network at boot



I've got the same problem in RH8.0 after I changed the hostname with the GUI
tool. During the initialization it syas that can't find the eth0, but
actualy I get always an IP address. You can change this in the  rc3.d or
rc5.d PCMCIA to be initialized before the network ( the numeber after
SXXPCMCIA has to be smaller then in SXXnetwork).

2ib
----- Original Message -----
From: "Patrick Marquetecken" <patrick marquetecken pandora be>
To: "Psyche redhat" <psyche-list redhat com>
Sent: Wednesday, March 05, 2003 9:34 PM
Subject: PCMCIA network at boot


> Hi,
>
> I'm trying to get my Lucent Orinoco to activate at boot time.
> It wont work, my network it tries to load it before pcmcia.
> With a script works it.
>
> My system RH 7.3
>
> /etc/sysconfig/network-scripts/ifcfg-eth0
> USERCTL='no'
> DHCP_HOSTNAME=''
> BOOTPROTO='dhcp'
> HWADDR='00:02:2d:3b:e9:85'
> DEVICE='eth0'
> TYPE='Wireless'
> Device=eth0
> ONBOOT='yes'
> PEERDNS='yes'
> CHANNEL='1'
> MODE='Managed'
> KEY='s:xxxx'
> RATE='11Mb/s'
> IPADDR=''
> GATEWAY=''
> DOMAIN=''
> NAME=''
> NETMASK=''
> ESSID='any'
>
> /etc/modules.conf
> alias eth0 orinoco_cs
>
>
> Any advice would be fine
>
> Patrick
>
>
>
> --
> Knowledge in a databank,is like food which is in a deepfreeze.
> Nothing comes out better than what is initially put in.
>
> PGP Key: http://users.pandora.be/rivendell/marquetp.gpg
> Registered Linux User #44550 http://counter.li.org
>
>
>
> --
> Psyche-list mailing list
> Psyche-list redhat com
> https://listman.redhat.com/mailman/listinfo/psyche-list
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]