[Rdo-list] [[RDO-Manager] undercloud install - heiry
Alessandro Vozza
alessandro at namecheap.com
Thu Dec 3 22:50:57 UTC 2015
I’m hitting the same wall, my undercloud.conf is minimalistic:
[DEFAULT]
local_interface = eno33554992
inspection_runbench = true
enable_tuskar = false
[auth]
after the error I have :
[stack at undercloud ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:67:e5:8c brd ff:ff:ff:ff:ff:ff
inet 172.16.0.100/24 brd 172.16.0.255 scope global eno16777736
valid_lft forever preferred_lft forever
inet6 fd15:4ba5:5a2b:1002:20c:29ff:fe67:e58c/64 scope global dynamic
valid_lft 86399sec preferred_lft 14399sec
inet6 fe80::20c:29ff:fe67:e58c/64 scope link
valid_lft forever preferred_lft forever
3: eno33554992: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovs-system state UP qlen 1000
link/ether 00:0c:29:67:e5:96 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20c:29ff:fe67:e596/64 scope link
valid_lft forever preferred_lft forever
4: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether b6:a6:69:00:1d:35 brd ff:ff:ff:ff:ff:ff
5: br-ctlplane: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 00:0c:29:67:e5:96 brd ff:ff:ff:ff:ff:ff
inet 192.0.2.1/24 brd 192.0.2.255 scope global br-ctlplane
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe67:e596/64 scope link
valid_lft forever preferred_ft forever
after editing /etc/puppet/modules/neutron/manifests/server/notifications.pp and setting a a random password there (I know, dirty hack) under cloud deployed successfully (not sure if functional tho).
regards
> On 01 Dec 2015, at 01:44, Mikyung Kang <mkkang at isi.edu> wrote:
>
> Thanks, John! W/o installing epel-release, hiera.yaml error is gone, but os-refresh-config still complains.
>
> ...
> Notice: Finished catalog run in 486.52 seconds
> + rc=6
> + set -e
> + echo 'puppet apply exited with exit code 6'
> puppet apply exited with exit code 6
> + '[' 6 '!=' 2 -a 6 '!=' 0 ']'
> + exit 6
> [2015-11-30 18:25:38,091] (os-refresh-config) [ERROR] during configure phase. [Command '['dib-run-parts', '/usr/libexec/os-refresh-config/configure.d']' returned non-zero exit status 6]
>
> [2015-11-30 18:25:38,092] (os-refresh-config) [ERROR] Aborting...
> Traceback (most recent call last):
> File "<string>", line 1, in <module>
> File "/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py", line 562, in install
> _run_orc(instack_env)
> File "/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py", line 494, in _run_orc
> _run_live_command(args, instack_env, 'os-refresh-config')
> File "/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py", line 325, in _run_live_command
> raise RuntimeError('%s failed. See log for details.' % name)
> RuntimeError: os-refresh-config failed. See log for details.
> Command 'instack-install-undercloud' returned non-zero exit status 1
>
> [stack at gpu6 ~]$ uname -a
> Linux gpu6.east.isi.edu 3.10.0-229.20.1.el7.x86_64 #1 SMP Tue Nov 3 19:10:07 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
>
> [stack at gpu6 ~]$ dib-run-parts /usr/libexec/os-refresh-config/configure.d
> dib-run-parts Mon Nov 30 19:41:30 EST 2015 Running /usr/libexec/os-refresh-config/configure.d/00-apply-selinux-policy
> + set -o pipefail
> + '[' -x /usr/sbin/semanage ']'
> + semodule -i /opt/stack/selinux-policy/ipxe.pp
> semodule: SELinux policy is not managed or store cannot be accessed.
>
> Thanks,
> Mikyung
>
>
>
>
>
>
>
> ----- Original Message -----
> From: "John Trowbridge" <trown at redhat.com>
> To: "Mikyung Kang" <mkkang at isi.edu>, rdo-list at redhat.com
> Sent: Monday, November 30, 2015 5:11:43 PM
> Subject: Re: [Rdo-list] [[RDO-Manager] undercloud install - heiry
>
>
>
> On 11/30/2015 02:37 PM, Mikyung Kang wrote:
>> Hello,
>>
>> One week ago, I could install undercloud and deploy overcloud successfully.
>> I'm trying to install undercloud from clean CentOS7.1 OS again using the other network interface and the other IP range, but I got this error. I didn't get this before.
>>
>> ...
>> ++ iptables -t nat -N BOOTSTACK_MASQ_NEW
>> ++ NETWORK=192.3.2.0/24
>> ++ iptables -t nat -A BOOTSTACK_MASQ_NEW -s 192.3.2.0/24 -d 192.168.122.1 -j RETURN
>> ++ iptables -t nat -A BOOTSTACK_MASQ_NEW -s 192.3.2.0/24 '!' -d 192.3.2.0/24 -j MASQUERADE
>> ++ iptables -t nat -A POSTROUTING -s 192.3.2.0/24 -o eth0 -j MASQUERADE
>> ++ iptables -t nat -I POSTROUTING -j BOOTSTACK_MASQ_NEW
>> ++ iptables -t nat -F BOOTSTACK_MASQ
>> iptables: No chain/target/match by that name.
>> ++ true
>> ++ iptables -t nat -D POSTROUTING -j BOOTSTACK_MASQ
>> iptables v1.4.21: Couldn't load target `BOOTSTACK_MASQ':No such file or directory
>>
>> Try `iptables -h' or 'iptables --help' for more information.
>> ++ true
>> ++ iptables -t nat -X BOOTSTACK_MASQ
>> iptables: No chain/target/match by that name.
>> ++ true
>> ++ iptables -t nat -E BOOTSTACK_MASQ_NEW BOOTSTACK_MASQ
>> ++ iptables -D FORWARD -j REJECT --reject-with icmp-host-prohibited
>> + iptables-save
>> dib-run-parts Mon Nov 30 14:32:04 EST 2015 80-seedstack-masquerade completed
>> dib-run-parts Mon Nov 30 14:32:04 EST 2015 Running /usr/libexec/os-refresh-config/post-configure.d/98-undercloud-setup
>> + OK_FILE=/opt/stack/.undercloud-setup
>> + '[' -f /opt/stack/.undercloud-setup ']'
>> + source /root/tripleo-undercloud-passwords
>> +++ sudo hiera admin_password
>> Failed to start Hiera: RuntimeError: Config file /etc/puppetlabs/code/hiera.yaml not found
>
> This is caused by an update to the hiera package in EPEL.
>
>> ++ UNDERCLOUD_ADMIN_PASSWORD=
>> [2015-11-30 14:32:04,503] (os-refresh-config) [ERROR] during post-configure phase. [Command '['dib-run-parts', '/usr/libexec/os-refresh-config/post-configure.d']' returned non-zero exit status 1]
>>
>> [2015-11-30 14:32:04,503] (os-refresh-config) [ERROR] Aborting...
>> Traceback (most recent call last):
>> File "<string>", line 1, in <module>
>> File "/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py", line 562, in install
>> _run_orc(instack_env)
>> File "/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py", line 494, in _run_orc
>> _run_live_command(args, instack_env, 'os-refresh-config')
>> File "/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py", line 325, in _run_live_command
>> raise RuntimeError('%s failed. See log for details.' % name)
>> RuntimeError: os-refresh-config failed. See log for details.
>> Command 'instack-install-undercloud' returned non-zero exit status 1
>> ...
>>
>> I just followed RDO step as follows:
>>
>> sudo useradd stack
>> sudo passwd stack
>> echo "stack ALL=(root) NOPASSWD:ALL" | sudo tee -a /etc/sudoers.d/stack
>> sudo chmod 0440 /etc/sudoers.d/stack
>> su - stack
>> sudo hostnamectl set-hostname gpu6.east.isi.edu
>> sudo hostnamectl set-hostname --transient gpu6.east.isi.edu
>> sudo vim /etc/hosts
>> sudo yum -y upgrade
>> sudo yum -y install epel-release
>
> I think we actually do not need EPEL. Could you try without the above step?
>
>> sudo yum install -y http://rdoproject.org/repos/openstack-liberty/rdo-release-liberty.rpm
>> sudo yum install -y python-tripleoclient
>> cp /usr/share/instack-undercloud/undercloud.conf.sample ~/undercloud.conf
>> openstack undercloud install
>>
>>
>> Could you please help me to resolve this?
>>
>> Thanks,
>> Mikyung
>>
>> _______________________________________________
>> Rdo-list mailing list
>> Rdo-list at redhat.com
>> https://www.redhat.com/mailman/listinfo/rdo-list
>>
>> To unsubscribe: rdo-list-unsubscribe at redhat.com
>>
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
More information about the rdo-list
mailing list