[Rdo-list] RDO Manager status for Liberty GA

Thu Oct 22 14:46:25 UTC 2015

Hi,

I've managed to install it, thanks. Another question, how do I scale the
compute nodes?

I've tried: openstack overcloud deploy --compute-scale 2 --templates
~/the-cloud/ however I get this error:

[stack at undercloud ~]$ openstack overcloud deploy --compute-scale 2
--templates ~/the-cloud/
Deploying templates in the directory /home/stack/the-cloud
Stack failed with status: resources.Controller: resources[2]: BadRequest:
resources.Controller: No valid host was found. No valid host found for
resize (HTTP 400) (Request-ID: req-d5ab7497-ea7f-4ecf-ae8c-122f1637c5ea)
Heat Stack update failed.

Thanks

On Thu, Oct 22, 2015 at 2:59 PM, Omri Hochman <ohochman at redhat.com> wrote:

>
>
> ----- Original Message -----
> > From: "Pedro Sousa" <pgsousa at gmail.com>
> > To: "Omri Hochman" <ohochman at redhat.com>
> > Cc: "rdo-list" <rdo-list at redhat.com>
> > Sent: Wednesday, October 21, 2015 3:10:22 PM
> > Subject: Re: [Rdo-list] RDO Manager status for Liberty GA
> >
> > Hi Omri,
> >
> > I'll test it out thanks. Did you build your overcloud images based on
> > Liberty?
> >
> > export RDO_RELEASE='liberty'
> > openstack overcloud image build --all
>
> Yes - that's how we built the images.
>
> Omri.
> >
> >
> >
> > On Wed, Oct 21, 2015 at 7:30 PM, Omri Hochman <ohochman at redhat.com>
> wrote:
> >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Omri Hochman" <ohochman at redhat.com>
> > > > To: "Pedro Sousa" <pgsousa at gmail.com>
> > > > Cc: "rdo-list" <rdo-list at redhat.com>
> > > > Sent: Wednesday, October 21, 2015 11:16:03 AM
> > > > Subject: Re: [Rdo-list] RDO Manager status for Liberty GA
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Pedro Sousa" <pgsousa at gmail.com>
> > > > > To: "John Trowbridge" <trown at redhat.com>
> > > > > Cc: "rdo-list" <rdo-list at redhat.com>
> > > > > Sent: Wednesday, October 21, 2015 7:10:38 AM
> > > > > Subject: Re: [Rdo-list] RDO Manager status for Liberty GA
> > > > >
> > > > > Hi John,
> > > > >
> > > > > I've managed to install on baremetal following this howto:
> > > > > https://remote-lab.net/rdo-manager-ha-openstack-deployment/
> (based on
> > > > > liberty)
> > > >
> > > > Hey Pedro,
> > > >
> > > > Are you using:  yum install -y
> > > >
> http://rdoproject.org/repos/openstack-liberty/rdo-release-liberty.rpm
> > > > to get the latest RDO GA bits ?
> > > >
> > > > We're failing in overcloud deployment on BM with several issues.
> > >
> > > Actually, an update :
> > >
> > > After using the workaround from this issue:
> > > https://bugzilla.redhat.com/show_bug.cgi?id=1271289#c9
> > >
> > > We've manage to get HA on Bare-Metal (*using the latest
> > > rdo-release-liberty.rpm)
> > >
> > > That was the deployment command :
> > >
> > > openstack overcloud deploy --templates --control-scale 3
> --compute-scale 1
> > > --ceph-storage-scale 1 -e
> > >
> /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml
> > > -e /home/stack/network-environment.yaml -e
> > >
> /usr/share/openstack-tripleo-heat-templates/environments/puppet-pacemaker.yaml
> > > --ntp-server 10.5.26.10 --neutron-network-type vxlan
> --neutron-tunnel-types
> > > vxlan --timeout 90
> > >
> > > >
> > > > Thanks,
> > > > Omri.
> > > >
> > > > >
> > > > > I have 3 Controllers + 1 Compute (HA and Network Isolation).
> However
> > > I'm
> > > > > having some issues logging on (maybe some keystone issue) and some
> > > issue
> > > > > with openvswitch that I'm trying to address with Marius Cornea
> help.
> > > > >
> > > > > Regards,
> > > > > Pedro Sousa
> > > > >
> > > > >
> > > > > On Wed, Oct 21, 2015 at 11:54 AM, John Trowbridge <
> trown at redhat.com >
> > > > > wrote:
> > > > >
> > > > >
> > > > > Hola rdoers,
> > > > >
> > > > > The plan is to GA RDO Liberty today (woot!), so I wanted to send
> out a
> > > > > status update for the RDO Manager installer. I would also like to
> > > gather
> > > > > feedback on how other community participants feel about that
> status as
> > > > > it relates to RDO Manager participating in the GA. That feedback
> can
> > > > > come as replies to this thread, or even better there is a packaging
> > > > > meeting on #rdo at 1500 UTC today and we can discuss it further
> then.
> > > > >
> > > > > tldr;
> > > > > RDO Manager installs with 3 controllers, 1 compute, and 1 ceph on
> > > > > virtual hardware have been verified to work with GA bits, however
> bare
> > > > > metal installs have not yet been verified.
> > > > >
> > > > > I would like to start with some historical context here, as it
> seems we
> > > > > have picked up quite a few new active community members recently
> (again
> > > > > woot!). When RDO Kilo GA'd, RDO Manager was barely capable of a
> > > > > successful end to end demo with a single controller and single
> compute
> > > > > node, and only by using a special delorean server pulling bits
> from a
> > > > > special github organization (rdo-management). We were able to get
> it
> > > > > consistently deploying **virtual** HA w/ ceph in CI by the middle
> of
> > > the
> > > > > Liberty upstream cycle. Then, due largely to the fact that there
> was
> > > > > nobody being paid to work full time on RDO Manager, and the people
> who
> > > > > were contributing in more or less "extra" time were getting swamped
> > > with
> > > > > releasing RHEL OSP 7, CI on the Kilo bits became mostly red with
> brief
> > > > > 24 hour periods where someone would spend a weekend fixing things
> only
> > > > > to have it break again early the following week.
> > > > >
> > > > > There have been many improvements in the recent weeks to this sad
> state
> > > > > of affairs. Firstly, we have upstreamed almost everything from the
> > > > > rdo-management github org directly into openstack projects.
> Secondly,
> > > > > there is a single source for delorean packages for both core
> openstack
> > > > > packages and the tripleo and ironic packages that make up RDO
> Manager.
> > > > > These two things may seem a bit trivial to a newcomer to the
> project,
> > > > > but they are actually fixes for the biggest cause of the RDO
> Manager
> > > > > Kilo CI breaking. I think with those two fixes (plus some work on
> > > > > upstream tripleo CI) we have set ourselves up to make steady
> forward
> > > > > progress rather than spending all our time troubleshooting complete
> > > > > breakages. (Although this is still openstack so complete breakages
> will
> > > > > still happen from time to time :p)
> > > > >
> > > > > Another very easy to overlook improvement over where we were at
> Kilo
> > > GA,
> > > > > is that we actually have all RDO Manager packages (minus a couple
> EPEL
> > > > > dep stragglers[1]) in the official RDO GA repo. When RDO Kilo
> GA'd, we
> > > > > did not even have everything officially packaged, rather only in
> our
> > > > > special delorean instance.
> > > > >
> > > > > All this leads to my opinion that RDO Manager should participate
> in the
> > > > > RDO GA. I am unconvinced that bare metal installs can not be made
> to
> > > > > work with some extra documentation or configuration changes.
> However,
> > > > > even if that is not the case, we are in a drastically better place
> than
> > > > > we were at the beginning of the Kilo cycle.
> > > > >
> > > > > That said, this is a community, and I would like to hear how other
> > > > > community participants both from RDO in general and RDO Manager
> > > > > specifically feel about this. Ideally, if someone thinks the RDO
> > > Manager
> > > > > release should be blocked, there should be a BZ with the blocker
> flag
> > > > > proposed so that there is actionable criteria to unblock the
> release.
> > > > >
> > > > > Thanks for all your hard work to get to this point, and lets keep
> it
> > > > > rolling.
> > > > >
> > > > > -trown
> > > > >
> > > > > [1] https://bugzilla.redhat.com/show_bug.cgi?id=1273541
> > > > >
> > > > > _______________________________________________
> > > > > Rdo-list mailing list
> > > > > Rdo-list at redhat.com
> > > > > https://www.redhat.com/mailman/listinfo/rdo-list
> > > > >
> > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Rdo-list mailing list
> > > > > Rdo-list at redhat.com
> > > > > https://www.redhat.com/mailman/listinfo/rdo-list
> > > > >
> > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > > >
> > > > _______________________________________________
> > > > Rdo-list mailing list
> > > > Rdo-list at redhat.com
> > > > https://www.redhat.com/mailman/listinfo/rdo-list
> > > >
> > > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/rdo-list/attachments/20151022/5dd99a50/attachment.htm>