[rdo-list] [TripleO] Setting NeutronBridgeMappings just for compute nodes in NFV deployment

[Samuel Monderer]

Hi Marius,

Attached is the controller node template.
I've also added below the ovs-vsct show results for both the compute and
control node
For some reason there is also a bridge called "undef" in both the
controller and the compute

[heat-admin at overcloud-controller-0 ~]$ sudo ovs-vsctl show
00ce4561-418d-4161-b907-3b2222930f35
    Manager "ptcp:6640:127.0.0.1"
    Bridge br-int
        Controller "tcp:127.0.0.1:6633"
        fail_mode: secure
        Port br-int
            Interface br-int
                type: internal
    Bridge undef
        Port undef
            Interface undef
                type: internal
    Bridge br-mng
        fail_mode: standalone
        Port "vlan204"
            tag: 204
            Interface "vlan204"
                type: internal
        Port "vlan202"
            tag: 202
            Interface "vlan202"
                type: internal
        Port br-mng
            Interface br-mng
                type: internal
        Port "vlan203"
            tag: 203
            Interface "vlan203"
                type: internal
        Port "eno2"
            Interface "eno2"
        Port "vlan201"
            tag: 201
            Interface "vlan201"
                type: internal
    Bridge br-up
        Port br-up
            Interface br-up
                type: internal
    Bridge br-ex
        fail_mode: standalone
        Port br-ex
            Interface br-ex
                type: internal
        Port "eno3"
            Interface "eno3"
    ovs_version: "2.5.0"
[heat-admin at overcloud-controller-0 ~]$


[heat-admin at overcloud-compute-0 ~]$ sudo ovs-vsctl show
2f6bccd5-9653-42df-a1db-8cb5c3b0293a
    Manager "ptcp:6640:127.0.0.1"
    Bridge br-down
        fail_mode: standalone
        Port br-down
            Interface br-down
                type: internal
        Port "em3"
            Interface "em3"
    Bridge br-up
        fail_mode: standalone
        Port br-up
            Interface br-up
                type: internal
        Port "em4"
            Interface "em4"
    Bridge br-ex
        fail_mode: standalone
        Port "vlan204"
            tag: 204
            Interface "vlan204"
                type: internal
        Port "vlan202"
            tag: 202
            Interface "vlan202"
                type: internal
        Port "vlan201"
            tag: 201
            Interface "vlan201"
                type: internal
        Port br-ex
            Interface br-ex
                type: internal
        Port "em2"
            Interface "em2"
    Bridge br-int
        Controller "tcp:127.0.0.1:6633"
        fail_mode: secure
        Port br-int
            Interface br-int
                type: internal
    Bridge undef
        Port undef
            Interface undef
                type: internal
    ovs_version: "2.5.0"
[heat-admin at overcloud-compute-0 ~]$




On Fri, Mar 31, 2017 at 1:01 PM Marius Cornea <marius at remote-lab.net> wrote:

> Hi Samuel,
>
> Could you please share the nic template used for the controller node?
> The bridges should be created according to the nic template so I would
> like to see how it looks.
>
> Thanks!
>
> On Thu, Mar 30, 2017 at 4:59 PM, Samuel Monderer
> <smonderer at vasonanetworks.com> wrote:
> > Hi,
> >
> > I would like to test my VNF on an openstack environment deployed using
> > TripleO.
> > For that I need to setup flat provider networks that go only to the
> compute
> > node.
> > I tried deploying an overcoud with additional neutron bridge mappings as
> > following
> >
> > Added NeutronBridgeMappings: "
> > datacentre:br-ex,physdown;br-down,physup:br-up" to network environment
> file
> > Added following resources to compute.yaml file
> >
> >             -
> >               type: ovs_bridge
> >               name: br-down
> >               mtu: 9000
> >               members:
> >                 -
> >                   type: interface
> >                   name: ens4f0
> >                   # force the MAC address of the bridge to this interface
> >                   primary: true
> >             -
> >               type: ovs_bridge
> >               name: br-up
> >               mtu: 9000
> >               members:
> >                 -
> >                   type: interface
> >                   name: ens4f1
> >                   # force the MAC address of the bridge to this interface
> >                   primary: true
> >
> > This will create the intended OVS bridges on the the compute node with
> the
> > interfaces connected.
> >
> > The unwanted side effect it that ii also created the bridges on the
> > controller node without any interfaces connected to it
> >
> > Is there a way to have the undercloud create the bridges only on the
> compute
> > nodes and not on the controller nodes???
> >
> > Samuel
> >
> > _______________________________________________
> > rdo-list mailing list
> > rdo-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/rdo-list/attachments/20170403/3179d38b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: controller.yaml
Type: application/x-yaml
Size: 6480 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/rdo-list/attachments/20170403/3179d38b/attachment.bin>