no linux after reboot

[Grant Allan]

> On Sat, Dec 10, 2005 at 03:18:32AM +1300, Grant Allan wrote:
>> >> hi,
>> >>
>> >> i have some more news: grub.conf looks OK to me.
>> >> but grub-install generates an error as follows:
>> >>    /dev/hdd1 does not have any corresponding BIOS drive
>> >>
>> >> does that maybe mean that i should jump into BIOS and get it to
>> >> autodetect
>> >> my hard drives?  i forgot to do that yesterday.
>> >
>> > It's probably already doing that.  It's unrelated.
>> >
>> >> cheers,
>> >> grant
>> >
>> > Just another detail to take care of what the installer missed.  After
>> > you have chrooted to /mnt/sysimage, edit /boot/grub/device.map to add
>> > the line
>> >
>> > (hd3)     /dev/hdd
>> >
>> > assuming "hd3" is not mapped to some other device.  Note that in
>> > grub.conf, numbering starts at 0, not 1.  Then do the grub-install
>> > thing.  If that doesn't work, you may need to tell us more about the
>> > drive and partitioning arrangement, and post grub.conf, if you can.
>> >
>> > Cheers,
>> > --
>> > Bob McClure, Jr.
>>
>> Hi,
>>
>> Yay, I'm no longer getting windows!  Furthermore, I have learned today
>> about bottom posting.
>
> Hurray!  And don't be afraid to trim unrelated or unnecessary cruft
> like mailing list footer and excess lines in the sigs.
>
>> However, I now have the following on rebooting my machine:
>>
>> GRUB Loading stage1.5
>> GRUB loading, please wait...
>> Error 21
>>
>> To make sure I tell you the right stuff regarding partitions & disks,
>> please can you tell me if there is a way to query for this info (e.g.
>> using linux rescue)?
>
> Hmm.  I dunno.  If you have another machine on your local net, maybe
> you could start up networking during the rescue startup, then chroot
> to /mnt/sysimage, and then you could scp (secure cp using SSH) the
> info to another machine.
>
>> I have both put old and new hard drives on the one ribbon, but by my
>> understanding that doesn't add up with the name /hdd, so I'd like to
>> find
>> out for sure.
>
> That's correct.  Here's how the labeling goes:
>
> Controller  Drive   Device   Grub map
> ---------   -----   ------   --------
> Primary     Master  /dev/hda (hd0)
> Primary     Slave   /dev/hdb (hd1)
> Secondary   Master  /dev/hdc (hd2)
> Secondary   Slave   /dev/hdd (hd3)
>
> I might also mention that, in general, jumpering drives as Cable
> Select (CS) is evil.  Just jumper the drives as master and slave as
> appropriate.  That _always_ works.
>
>> Thanks again,
>> Grant
>
> Cheers,
> --
> Bob McClure, Jr.             Bobcat Open Systems, Inc.

ok,

so since my second hard-drive is on the same ribbon as /dev/hda, i expect
it to be hdb, not hdd.

this makes it odd that calling grub-install generated an error that
"/dev/hdd1 does not have any corresponding BIOS drive"

is it possible to fire up that druid thingy from the rescue cd to see if
the names are mixed up?

cheers,
grant