FC3 - Ran up2date now CD Volume is not working
Bob McClure Jr
robertmcclure at earthlink.net
Wed Sep 28 16:41:07 UTC 2005
On Tue, Sep 27, 2005 at 10:19:49PM -0500, Edward.D.Kramer at wellsfargo.com wrote:
> Im running a SIS_Silicon Integrated Systenms) Mother board, model number
> I cant remember but it's an AMD 1.7 GZ. I have two sound cards, one
> board and the other is Ensoniq 5880 AudioPCI. This is what my 3 way
> Logitech run off of and nothing is connected to the second sound card
> which a SIS on board. The driver for the Ensoniq(I actaully thought it
> was a Sound Balster PCI 16) is snd-ens1371, The driver for the
> snd-intel8x0.
>
> As for my configuration Im using a base FC3 install with uo2date fully
> up to date. I just upgraded my kernel to 2.6.12, and CDs were playing
> before.
>
> Attached is the output you requested, you can see the SIS card in there
> but not the Ensoniq. Im guessing this might be the problem??
I believe I see them both. See below:
> Thanks,
>
> DK
>
> -----Original Message-----
> From: redhat-install-list-bounces at redhat.com
> [mailto:redhat-install-list-bounces at redhat.com] On Behalf Of Rick
> Stevens
> Sent: Tuesday, September 27, 2005 06:29 PM
> To: Getting started with Red Hat Linux
> Subject: Re: FC3 - Ran up2date now CD Volume is not working
>
> On Tue, 2005-09-27 at 18:13 -0500, Edward.D.Kramer at wellsfargo.com wrote:
> > I just installed a fresh version FC3 and ran the up2date, including
> > the Kernel upgrade (from 2.6.9 to 2.6.12). My Gnome-CD player is
> > working but Im getting no sound. Sound check on the sound cards is
> > yielding noise, but when I try to open it I get an error that says
> > Sorry, no mixer elements and/or devices found. It also doesn't let me
> > adjust the volume control from 0. All of my CDI picked through
> > google but everyone's Q\A didn't seem to work.
>
> Need to know what your mobo and sound configuration is like, Ed. Post
> your mobo and/or soundcard make and model and the output from "lspci
> -v" and we'll see what we can do.
>
> ----------------------------------------------------------------------
> - Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
> - VitalStream, Inc. http://www.vitalstream.com -
Content-Description: lspcioutput.txt
> [root at helix ~]# lspci -v
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 740 Host (rev 01)
> Flags: bus master, medium devsel, latency 32
> Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
> Capabilities: [c0] AGP version 2.0
>
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge ( AGP) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 64
> Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: cfc00000-cfdfffff
> Prefetchable memory behind bridge: bf800000-cf9fffff
>
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (r ev 04)
> Flags: bus master, medium devsel, latency 0
>
> 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
> Flags: medium devsel
> I/O ports at 0c00 [size=32]
>
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [ Master])
> Flags: bus master, medium devsel, latency 128
> I/O ports at ff00 [size=16]
Here's the SIS audio:
> 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Cont roller (rev a0)
> Subsystem: C-Media Electronics Inc: Unknown device 0300
> Flags: bus master, medium devsel, latency 64, IRQ 11
> I/O ports at dc00 [size=256]
> I/O ports at d800 [size=128]
> Capabilities: [48] Power Management version 2
>
> <snipped four USB controllers>
>
> 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Et hernet (rev 90)
> Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapt er
> Flags: bus master, medium devsel, latency 64, IRQ 12
> I/O ports at d400 [size=256]
> Memory at cffdb000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at cffa0000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 2
And here's the Ensoniq:
> 00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
> Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
> Flags: bus master, slow devsel, latency 64, IRQ 11
> I/O ports at d000 [size=64]
> Capabilities: [dc] Power Management version 1
>
> <remainder snipped>
Cheers,
--
Bob McClure, Jr. Bobcat Open Systems, Inc.
robertmcclure at earthlink.net http://www.bobcatos.com
Peace at any price is inflationary.
More information about the Redhat-install-list
mailing list