digital camera
Fred Grant
fdgrant at powercom.net
Fri Jul 21 20:52:20 UTC 2006
On Thu, 2006-07-20 at 12:13, Rick Stevens wrote:
> On Thu, 2006-07-20 at 08:37 -0500, Fred Grant wrote:
> > On Wed, 2006-07-19 at 19:27, Rick Stevens wrote:
> > > On Wed, 2006-07-19 at 18:05 -0500, Fred Grant wrote:
> > > > Recently acquired an el cheapo digital camera made by dgx. When I go to
> > > > mass storage mode via usb the hardware browser indicates the presence of
> > > > /dev/sda1.
> > > >
> > > > Do any of you have any pointers for viewing images? I assume I'll have
> > > > to mount /dev/sda1 but I don't know what type of file system it is or
> > > > how or where to mount it. Otherwise this should be a piece of cake!
> > >
> > > 99% of all cameras use FAT-32 or VFAT filesystems. Have you tried
> > > gphoto (Gnome) or kamera (KDE) to see if they "grok" your camera?
> > >
> > > If not, you probably want to create a mountpoint for your camera's
> > > storage (e.g. "/media/camera") once. Then, an appropriate mount command
> > > would be
> > >
> > > mount -t vfat /dev/sda1 /media/camera
> > >
> > > Then you'll see the directory structure under /media/camera. One of
> > > the more common would be:
> > >
> > > /media/camera/dcim/olympus/file.jpg
> > >
> > > That's from an old Olympus 3050Z camera I have. Usually, there will
> > > be a "dcim" directory, and under that some permutation of your camera's
> > > maker. The "*.jpg" files are the actual images.
> > >
> > Thanks Rick. I got it to work with /mnt/pics. How about a script to
> > automate the mount command? I've never written a script before so I
> > don't know how or where to save it so I can find it again and use it as
> > needed.
>
> Uh, hmmm. Well, as root, create the file "/usr/bin/mntcam". In it, put
> these lines:
>
> #!/bin/bash
> if [ $0 = "mntcam" ]; then
> mount -t vfat /dev/sda1 /mnt/pics
> echo "Camera mounted at /mnt/pics"
> else
> umount /mnt/pics
> echo "It is now safe to unplug the camera"
> fi
>
> Save it. Then (still as root), enter these two commands:
>
> # chmod 755 /usr/bin/mntcam
> # ln -s /usr/bin/mntcam /usr/bin/umntcam
>
> You now have two commands "mntcam" to mount it, and "umntcam" to unmount
> it.
>
Thanks Rick, I'll give it a shot. I thought about putting the device in
/etc/fstab assuming this would make mounting relatively easy from the
command line. Would this be an alternative?
--
Fred
More information about the Redhat-install-list
mailing list